botHunter

KO | EN

gitlite — search

#python #ai #typescript #llm #golang #go #machine-learning #linux #nodejs #awesome #vue #pytorch #openai #open-source

(★ 49)

Scans the internet for open FTP servers looking for common malware bot droppers and grabs them for sampling. Also provides support for uploading samples to VirusTotal

botHunter 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# botHunter
Scans the internet for open FTP servers looking for common malware bot droppers and grabs them for analysis. Downloads stored in output/ dir.

Scanning based on https://github.com/kennell/ftpknocker 
Copyright (c) 2014, kevin@fileperms.org All rights reserved.

Bot Hunting capabilities added by Hunter Gregal

##Requirements
------------

The **netaddr** module must be installed, on Debian/Ubuntu systems simply run:

```
sudo apt-get install python-pip
sudo pip install -r requirements.txt
```

##Install
-------

Clone this repository or save <a href="https://github.com/huntergregal/botHunter/botHunter.py">botHunter.py</a> on your machine and make it executable:

```
wget https://github.com/huntergregal/botHunter/botHunter.py
chmod +x ./botHunter.py
```

##Usage
-----

```
usage: botHunter.py [-h] [-t MAXTHREADS] [-w TIMEOUT] [-s]
                     [targets [targets ...]]

positional arguments:
  targets

optional arguments:
  -h, --help            show this help message and exit
  -t MAXTHREADS, --threads MAXTHREADS
                        Number of threads to use, default is 10
  -w TIMEOUT, --wait TIMEOUT
                        Seconds to wait before timeout, default is 2
  -s, --shuffle         Shuffle the target list
```

##Examples
--------

The syntax for specifying targets is similar to nmap. Here are some examples:

Scan three individual IPs:
```
./botHunter.py 192.168.1.1 192.168.1.2 192.168.1.3
```

Scan an entire IP-block using <a href="http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation">CIDR notation</a> (in this example, all hosts from 192.168.1.1 - 192.168.1.254 will be scanned, a total of 254 hosts):
```
./botHunter.py 192.168.1.0/24
```

Feed targets from a other programm using a pipe (must be IPs, seperated by newlines!): 
```
cat mytargets.txt | ./botHunter.py
```

botHunter

botHunter 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

botHunter

botHunter 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README