KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#developer-tools #dsh #dsh-plugin #ai-agent #claude-code #codex #typescript #ai-agents #mcp #cli #rust #deepseek-harness

iq_sim

★ 152 Open GitHub ↗

example gazebo ardupilot simulation package

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# IQ Simulations

This repo hosts gazebo worlds for various drone scenarios and various drone configurations. This Repo is specifically designed to work with the Ardupilot control system, and utilizes the ardupilot gazebo plugin to allow the ardupilot control software to interface and control the model drone in gazebo.

## Vehicles Supported

- [Quadcopters](#drone-simulations)
- [Quad-Planes](#quad-planes)
- [Boats](#boat-simulation)

## Community Discord Server

Come be a part of the growing community of drone application developers! Join the conversation in our [discord](https://discord.gg/xZjXaAf).

## IQ Tutorials
This Repo is part of the Intelligent Quads Software Development tutorial series. Please take a look at the following resources to learn more about how to use this repository.

[Intelligent Quads Text Tutorials](https://github.com/Intelligent-Quads/iq_tutorials)

[Intelligent Quads Video Tutorials](https://www.youtube.com/channel/UCuZy0c-uvSJglnZfQC0-uaQ)

## Dependencies

Take a look at these tutorials to setup ardupilot, gazebo and the ardupilot gazebo plugin

[Installing Ardupilot and MAVProxy](https://github.com/Intelligent-Quads/iq_tutorials/blob/master/docs/Installing_Ardupilot.md)

[Installing QGroundControl](https://github.com/Intelligent-Quads/iq_tutorials/blob/master/docs/installing_qgc.md)

[Installing Gazebo and ArduPilot Plugin](https://github.com/Intelligent-Quads/iq_tutorials/blob/master/docs/installing_gazebo_arduplugin.md)

Installing x-term is recommended as it allows the ardupilot sitl interface to run in a terminal that will cleanly close when closing you sitl instance
```
sudo apt install xterm
```

## Drone Simulations

![runway world](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/runway.jpg)

This repo contains a couple different gazebo worlds containing various ardupilot drone configurations. The worlds are listed below

- `droneOnly.world` - simple gazebo world containing only a single drone
- `runway.world` - simple gazebo world containing only a single drone on a runway
- `lidar.world` - a simple gazebo world containing a single drone with a 2d lidar sensor
- `multi_drone.world` - a simple world containing 12 drones

### Running Drone Simulations

Each world contains a corresponding launch file. For example to launch `runway.world` run
```
roslaunch iq_sim runway.launch
``` 
Launch the ardupilot instance by running 
```
cd ~/ardupilot/ArduCopter/ && sim_vehicle.py -v ArduCopter -f gazebo-iris --console
``` 
For more information, take a look at the corresponding tutorials [here](https://github.com/Intelligent-Quads/iq_tutorials)

## Quad Planes

Quad Planes are a vtol aircraft that uses quadcopter controls in hover and airplane controls in forward flight.

![vtol pic](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/vtol_sim.png)

### Setup

In order to use the gazebo quad plane sim a few files needed to be modified in ardupilot the first is to add the following to the file `ardupilot/Tools/autotest/pysim/vehicleinfo.py` on line 274. this should be within the Arduplane structure.

```
"gazebo-quadplane": {
    "waf_target": "bin/arduplane",
    "default_params_filename": "default_params/gazebo_quadplane.parm",
},
```

copy the file `iq_sim/scripts/vtol-params/gazebo_quadplane.parm` to `ardupilot/Tools/autotest/default_params/gazebo_quadplane.parm`

### Running VTOL sim

## Run Boat Sim

First terminal 
```
roslaunch iq_sim vtol.launch
```
Second terminal
```
sim_vehicle.py -v ArduPlane -f gazebo-quadplane  -m --mav10 --console -I0
```

## Boat Simulation

Recently I have been experimenting with Ardurover for controlling an autonomous boat. Below shows the steps for installing for boat simulation. If you have already installed for quadcopter simulation, then most of the boat installation should already be completed.

[boat setup](docs/boat_setup.md)

![river world](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/river_world.jpg)

## Run Boat Sim

First terminal 
```
roslaunch iq_sim boat.launch
```
Second terminal
```
sim_vehicle.py -v APMrover2 -f gazebo-rover  -m --mav10 --console -L Viridian
```

## IQ_SIM Models

### drone1-12
This repo hosts a few helpful gazebo models you can use to build upon. Included in this repo are 12 drones which contain the ardupilot plugin. Each ardupilot plugin is staggered such that you can simulate multiple unique aircraft using ardupilot's SITL. For more information please see the iq_tutorial on [ardupilot drone swarming](https://github.com/Intelligent-Quads/iq_tutorials/blob/master/docs/swarming_ardupilot.md)

### drone_with_lidar

Example drone that has a 2d lidar attached. The lidar plugin publishes a `sensor_msgs/LaserScan` ROS msg containing return data.

topics
```
/spur/laser/scan
```

![drone_with_lidar](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/drone_with_lidar.png)

### drone_with_sonar

Example drone with 4 sonars attached in each direction. Each sonar publishes a `sensor_msgs/Range` ROS msg containing range data.

topics 
```
/drone1/sensor/sonar/back
/drone1/sensor/sonar/front
/drone1/sensor/sonar/left
/drone1/sensor/sonar/right
```
![drone_with_sonar](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/drone_with_sonar.png)

### drone_with_camera

Example drone with a forward facing camera. The camera published a `sensor_msgs/Image` ROS msg which can be used to view or do image processing on.

![drone_with_camera](https://raw.githubusercontent.com/Intelligent-Quads/iq_sim/master/docs/imgs/drone_with_camera.png)

iq_sim

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README