webm-for-4chan

KO | EN

gitlite — search

#javascript #hacktoberfest #ai #typescript #go #android #machine-learning #rust #awesome #awesome-list #pytorch #security #openai #open-source

(★ 31)

Webm converter for 4chan

webm-for-4chan 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# webm-for-4chan
Webm (and mp4) converter optimized for 4chan.\
Just works for noobs while supporting advanced features for power users.\
Targets 6MB with sound (/wsg/) by default, but 4MB with sound (/gif/) and 4MB without sound are supported.\
Developed on Linux, probably works on Windows.

Checkout [my webm guide](https://chameleon-ai.github.io/webm-guide/) if you want to learn more about webms in general.

- [Features](#features)
- [How Does it Work?](#how-does-it-work)
- [Installation and Dependencies](#installation-and-dependencies)
- [Usage](#usage)
  - [Command Line Arguments Reference](#command-line-arguments-reference)
  - [Music Webms](#music-webms)
  - [Context Specific Arguments](#context-specific-arguments)
  - [Clipping](#clipping)
  - [Subtitle Burn-in](#subtitle-burn-in)
  - [Cutting or Concatenating Segments](#cutting-or-concatenating-segments)
  - [Trimming Silence](#trimming-silence)
  - [Changing Target Size and Removing Sound](#changing-target-size-and-removing-sound)
  - [yt-dlp Integration](#yt-dlp-integration)
  - [Gif Caption Mode](#gif-caption-mode)
  - [Miscellaneous Features](#miscellaneous-features)
- [Extra Notes and Quirks](#extra-notes-and-quirks)
- [Tips, Tricks, and References](#tips-tricks-and-references)

## Features
- Precise size calculation, designed to render webms just under the size limit
- Automatic resolution scaling
- Automatic audio bit-rate reduction based on length
- Automatic stereo or mono mixdown based on audio bit-rate
- Volume normalization
- Automatic cropping (remove black bars)
- Precise clipping to the nearest millisecond
- Cut segments out of the middle of the video
- Concatenate segments from different parts of the video
- Audio track selection for multi-audio sources
- Subtitle burn-in
- Skip black frames at the start of a video
- Automatically trim silent portions of a video
- Music mode optimized for songs
- Combine static image with audio
- Add/replace audio without re-encoding video
- Hardware acceleration
- yt-dlp integration (experimental)

## How Does it Work?
It's a simple wrapper for ffmpeg. A precise file size is determined by first rendering the audio, then calculating a target video bit-rate in kbps using the remaining space not taken up by the audio. Then, using 2-pass encoding, it's up to ffmpeg to hit the target size exactly. It's usually very good at hitting the target size without going over, but it's not perfect.

## Installation and Dependencies
**As long as you have python, you're good to go.**\
No virtual environments, no compiling, no installation.\
This script just uses the python standard library and makes system calls to ffmpeg and ffprobe.\
Make sure ffmpeg and ffprobe are accessible from your path, that's it.

If ffmpeg is not in your system path or you want to specify an alternate, edit `ffmpeg_path = None` at the top of the script, e.g. `ffmpeg_path = '/home/your/custom/path'`\
For optional [yt-dlp](https://github.com/yt-dlp/yt-dlp) support, make sure yt-dlp is in your system path or edit `ytdlp_path = None` at the top of the script.\
(yt-dlp is not a hard dependency, it is only used if you specify a url to download)

On Linux, I recommend adding an alias for easy access, something like this:\
`alias webm-for-4chan="python /path/to/webm-for-4chan/webm_for_4chan.py"`

On Windows, you can drag-and-drop the video onto a .bat file containing the following line:\
`python C:\path\to\webm-for-4chan\webm_for_4chan.py "%~1"`

## Usage
If the video is already clipped and ready to be converted, simply:
```
python webm_for_4chan.py input.mp4
```

Combine a static image (or animated gif) with audio:
```
python webm_for_4chan.py image.png song.mp3
```

Replace the video's audio (or add audio to a video without sound):
```
python webm_for_4chan.py --audio_replace video.webm audio.mp3
```

Note that this is a special mode where the video is copied, not re-encoded. The duration is limited to the video length.

Download a video using yt-dlp and encode it:
```
python webm_for_4chan.py https://www.youtube.com/watch?v=dQw4w9WgXcQ
```

The output will be the name of the input prepended with `_1_`, i.e. `_1_input.webm` or `_2_`, `_3_` etc. if the file already exists.\
Use `-o`/`--output` to specify a custom file name or directory. If `-o` is a directory, it will name the file after the input.

### Command Line Arguments Reference

| Flag        | Description | Example |
| ----------- | ----------- | ----------- |
| `-a` / `--audio_filter` | [Audio filter](https://ffmpeg.org/ffmpeg-filters.html#Audio-Filters) arguments. This string is passed directly to ffmpeg's -af chain. | `-a areverse` |
| `--audio_index` | Audio track index to select for videos with multiple audio tracks (use `--list_audio` if you don't know the index). | `--audio_index 1` |
| `--audio_lang` | Select audio track by language, must be an exact match with what is listed in the file (use `--list_audio` if you don't know the language). Note that the language metadata is often mislabeled, so it's more reliable to use `--audio_index` if you already know which track you want to select. | `--audio_lang jpn` |
| `--audio_rate` | Manually specify audio bitrate in kbps. If not specified, it will be automatically determined based on video length. Note that audio rates 64k and below will be mixed down to mono unless `--no_mixdown` is specified. | `--audio_rate 96` |\
| `--audio_replace` | Special mode that replaces the audio of a clip with other audio without modifying the video. | `--audio_replace input.mp3` |
| `--auto_crop` | Automatic crop using [cropdetect](https://ffmpeg.org/ffmpeg-filters.html#cropdetect) (removes letterboxing). | `--auto_crop` |
| `--auto_subs` | Automatically burn-in the first embedded subtitles, if they exist. | `--auto_subs` |
| `-b` / `--bitrate_compensation` | Fixed value to subtract from target bitrate (kbps). Use if your output size is overshooting. | `-b 2` |
| `--bframes` | Number of B-frames to use in video encoding (passed as the -bf option). Default is -1 (auto) | `--bframes 0` |
| `--blackframe` | Skip initial black frames using a first pass with [blackframe](https://ffmpeg.org/ffmpeg-filters.html#blackframe) filter. | `--blackframe` |
| `--board` / `--mode` | Target board, which adjusts the size and sound settings. wsg=6MB with sound, gif=4MB with sound, other=4MB no sound | `--board gif` |
|`--bypass_resolution_table`| Do not snap to the nearest standard resolution and use raw calculated instead. | `--bypass_resolution_table` |
|`-c` / `--concat` / `--clip` | Segments to concatenate (everything BUT these are cut), separated by "`;`". See [Clipping](#clipping) section of readme. | `-c "5:00-5:15;5:45-5:52.4"` |
| `--caption` | Caption text to add. See [Gif Caption Mode](#gif-caption-mode) section of readme. | `--caption "hello world"` |
| `--cc` | Make a lossless, unresized, unfiltered carbon copy as h264+opus mkv (Warning: these files can be very large, up to multiple gigabytes). Useful if you anticipate retrying the encode with various settings or if you just want an unresized original clip. Using `--cc` with `--dry_run` will intentionally still create the mkv (`--dry_run` only skips final 2-pass target encoding). | `--cc` |
| `--codec` | Video codec to use. The appropriate corresponding audio codec will be automatically selected. May be `libvpx-vp9`, `libx264`, `vp9_vaapi`, or [h264_nvenc](https://trac.ffmpeg.org/wiki/HWAccelIntro#NVENC). Default is libvpx-vp9. | `--codec libx264` |
| `--crop` | Crop the video. This string is passed directly to ffmpeg's [crop](https://ffmpeg.org/ffmpeg-filters.html#crop) filter. | `--crop "512:768:iw-512:ih-768"` |
| `-d` / `--duration` | Clip duration timestamp. Automatically set to the full length of the video if `--start` or `--end` are not specified. | `-d 1:23` |
| `--deadline` | The [-deadline](https://trac.ffmpeg.org/wiki/Encode/VP9#DeadlineQuality) argument passed to ffmpeg. Default is `good`. `best` is higher quality but significantly slower. | `--deadline best` |
| `--download` | URL to download using yt-dlp. Use this if deducing the URL from a context specific argument fails. See the [yt-dlp Integration](#yt-dlp-integration) section of the readme. | `--download https://youtu.be/dQw4w9WgXcQ`  |
| `--download_full` | Download the full video before processing (otherwise only the clip bounded by `--start` and `--end` / `--duration` is downloaded). | `--download_full` |
| `--dry_run` | Make all the size calculations without encoding the webm. ffmpeg commands and bitrate calculations will be printed. | `--dry_run` |
| `-e` / `--end` | Absolute end timestamp. Used instead of `-d` / `--duration`. Do not specify both `-e` and `-d`. | `-e 2:34` |
| `--font` | Font to use when specifying `--caption`. | `--font Impact` |
| `--fps` | Manual fps override. If not specified, fps will be automatically determined based on video length. | `--fps 24` |
| `-g` / `--group_of_pictures` | Manually set ffmpeg's group-of-pictures interval (a.k.a [keyframe interval](https://www.ioriver.io/terms/keyframe-interval)), in frames. This is directly passed as the `-g` argument to ffmpeg. Not recommended to mess with this unless you know what you're doing. | `-g 60` |
| `--hdr` | Convert HDR to the standard colorspace using [zscale transfer](https://ffmpeg.org/ffmpeg-filters.html#zscale-1). | `--hdr` |
| `-i` / `--input` | Input file to process. Use this if deducing from a context specific argument fails. | `-i input.mp4` |
| `-k` / `--keep_temp_files` | Keep temporary files like `temp.opus` and `temp.mkv` | `-k` |
| `--list_audio` | List audio tracks and quit. Use if you don't know which `--audio_index` or `--audio_lang` to specify. | `--list_audio` |
| `--list_subs` | List embedded subtitles and quit. Use if you don't know which `--sub_index` or `--sub_lang` to specify. | `--list_subs` |
| `--mixdown` | Sound mixdown mode. Can be `auto`, `stereo`, `mono`, or `same_as_source`. Default = `auto` | `--mixdown stereo` |
| `--mono` | Do mono mixdown. Equivalent to `--mixdown mono` | `--mono` |
| `--mp4` | Make .mp4 instead of .webm (shortcut for --codec libx264) | `--mp4` |
| `--music_mode` | Prioritize audio quality over visual quality. | `--music_mode` |
| `-n` / `--normalize` | Enable 2-pass [audio normalization](https://wiki.tnonline.net/w/Blog/Audio_normalization_with_FFmpeg) | `-n` |
| `--no_audio` | Encode without audio. | `--no_audio` |
| `--no_duration_check` | Disable max duration check. | `--no_duration_check` |
| `--no_dynaudnorm` | Disable [dynamic audio normalization](https://ffmpeg.org/ffmpeg-filters.html#dynaudnorm) when mixing down to mono. | `--no_dynaudnorm` |
| `--no_resize` | Do not resize the output. | `--no_resize` |
| `--no_mixdown` | Disable automatic audio mixdown. Equivalent to `--mixdown same_as_source` | `--no_mixdown` |
| `--no_mt` | Disable [row based multithreading](https://trac.ffmpeg.org/wiki/Encode/VP9#rowmt) | `--no_mt` |
| `-o` / `--output` | Output file name or directory (If not specified, output is named after the input prepended with "`_1_`") | `-o out.webm` |
| `--pix_fmt` | [Pixel format](https://gist.github.com/dericed/3319386) passed directly as the `-pix_fmt` arg to ffmpeg. By default it's [yuv420p](https://video.stackexchange.com/questions/39238/ffmpeg-when-should-one-use-pix-fmt-yuv420p-in-combination-with-filter-complex) for maximum compatibility. Use `same_as_source` to omit the arg from ffmpeg entirely, which will cause it to inherit the format of the source video implicitly. | `--pix_fmt same_as_source` |
| `-r` / `--resolution` | Manual resolution override. Applied as the maximum dimension both horizontal and vertical. If not specified, the resolution is automatically determined based on target bitrate. | `-r 1280` |
| `--resize_mode` | How to calculate target resolution. `table` = use time-based lookup table. May be `cubic`, `logarithmic`, or `table`. Default is `logarithmic`. | `--resize_mode table` |
| `-s` / `--start` | Absolute start timestamp. 0:00 if not specified. | `--start 3:45` |
| `--size` / `--limit` | Target file size limit, in MiB. Default is 6 if board is wsg, and 4 otherwise. | `--size 2.5` |
| `--static_image` | Treat video as a static image and use image+audio combine mode. | `--static_image` |
| `--stereo` | Do stereo mixdown. Equivalent to `--mixdown stereo` | `--stereo` |
| `--sub_index` | Subtitle index to burn-in (use `--list_subs` if you don't know the index) | `--sub_index 0` |
| `--sub_lang` | Subtitle language to burn-in, must be an exact match with what is listed in the file (use `--list_subs` if you don't know the language). Note subtitle language is often mislabeled, so this is less reliable than using the index.  | `--sub_lang en` |
| `--sub_file` | Filename of subtitles to burn-in (use --sub_index or --sub_lang for embedded subs) | `--sub_file subs.ass` |
| `--trim_silence` | Skip silence using a first pass with [silencedetect](https://ffmpeg.org/ffmpeg-filters.html#silencedetect) filter. Skip silence at the start, end, or cut all detected silence. May be `start`, `end`, `start_and_end`, or `all` | `--trim_silence all` |
| `--use_fallback` | yt-dlp sometimes falls back to an inferior video type (a 480p mp4 instead of the preferred 1080p webm for example). In this case, the downloaded video will have the same name except for the file extension. By default, the script will fail because the preferred file was not downloaded. Enabling this option allows webm-for-4chan to automatically proceed with encoding this file. | `--use_fallback` |
| `-v` / `--video_filter` | [Video filter](https://ffmpeg.org/ffmpeg-filters.html#Video-Filters) arguments. This string is passed directly to ffmpeg's -vf chain. | `-v "spp"` |
| `-x` / `--cut` | Segments to cut (opposite of concatenate) | `-x "2:00-3:00"`
| `-y` / `--yes` | Confirms "Y" on duplicate output name detection, overwriting the file. This only matters when manually specifying `-o` as auto outputs are automatically deconflicted. | `-y` |

### Music Webms
By default, webm-for-4chan chooses the lowest audio sample rate it can get away with. This is not desirable for music-oriented webms where sound comes first.
There are several ways to make music webms:
- Use the `--music_mode` flag. This will automatically pick a higher than normal audio rate:
```
python webm_for_4chan.py input.mp4 --music_mode
```
- Manually specify `--audio_rate`
```
python webm_for_4chan.py input.mp4 --audio_rate 128
```
- Use image + audio combine mode, which will result in the highest possible audio bitrate:
```
webm_for_4chan.py image.png song.mp3
```
- If you wish to pass a video into image + audio mode, use the `--static_image` flag.
```
python webm_for_4chan.py input.webm --static_image
```

### Context Specific Arguments
For advanced usage, use the standard command-line flags (`-b`, `-x`, `--auto_subs`, etc.)\
However, the script will attempt to parse arguments without flags using context clues:
- If the argument is a file, it's treated as the input filename (`python webm_for_4chan.py input.mp4`)
- If the argument is a single timestamp, it's treated as a duration (`python webm_for_4chan.py input.mp4 30` is equivalent to `python webm_for_4chan.py input.mp4 -d 30`)
- If the argument is two timestamps, the lesser is treated as the start time and the greater is the end time (`python webm_for_4chan.py input.mp4 30 45` is equivalent to `python webm_for_4chan.py input.mp4 -s 30 -e 45`)
- If the argument is a timestamp segment (timestamps separated by a dash, `1:00-2:00`), it's treated as a `-c`/`--concat` segment. (`python webm_for_4chan.py input.mp4 30-45` is equivalent to `python webm_for_4chan.py input.mp4 -c 30-45`)
- If the argument is a url, it's treated as the `--download` parameter. The script will then invoke yt-dlp to download the url.

### Clipping
Use `-s`/`--start` to specify a starting timestamp and `-e`/`--end` to specify an ending timestamp.\
Or specify `-c` to specify a segment (see section on Cutting or Concatenating Segments below).

Clip the video starting at 1 hr 23 minutes 45.1 seconds and ending at 1 hr 24 minutes 56.6 seconds:
```
python webm_for_4chan.py input.mp4 -s 1:23:45.1 -e 1:24:56.6
```
Or using context specific arguments:
```
python webm_for_4chan.py input.mp4 1:23:45.1 1:24:56.6
```

Note that using `-c` with one segment is equivalent:
```
python webm_for_4chan.py input.mp4 -c "1:23:45.1-1:24:56.6"
```
Or using context specific arguments:
```
python webm_for_4chan.py input.mp4 "1:23:45.1-1:24:56.6"
```

Specify a relative 2 minute duration using `-d`/`--duration`:
```
python webm_for_4chan.py input.mp4 -s 1:23:45.1 -d 2:00
```

Start time is 0:00 by default, so you can render the first minute of the clip like this:
```
python webm_for_4chan.py input.mp4 -d 1:00`
```
Or using context specific arguments:
```
python webm_for_4chan.py input.mp4 1:00
```

End time is also calculated if not specified, so to render from the 5:30 mark until the end of the video:
```
python webm_for_4chan.py input.mp4 -s 5:30
```

### Subtitle Burn-in
Render a 30 second anime clip with dual audio, select japanese audio and burn in english soft-subs:\
`python webm_for_4chan.py input.mkv --sub_lang eng --audio_lang jpn -s 12:00 -d 30`

Same as above, but select audio and subs by index instead of language:\
`python webm_for_4chan.py input.mkv --sub_index 0 --audio_index 1 -s 12:00 -d 30`

If you don't know the index or language, use `--list_subs` or `--list_audio`

Use external subtitles:\
`python webm_for_4chan.py input.mkv --sub_file "input.en.ssa"`

### Cutting or Concatenating Segments
You can trim the video using 2 different methods: `-x`/`--cut` and `-c`/`--concat`/`--clip`\
Cut means that the specified segments will be removed.\
Concat means that only the specified segments will be kept (the opposite of cut)
- Specify segments using a timestamp range, i.e. `"1:00-2:00"`
- Chain multiple segments together with ';', i.e. `"1:00-2:00;2:05-2:10"`
- Note that the segments are always absolute time from the original input.
- You must specify a start and end timestamp for the segment, separated by '-'.
- Segments must be in chronological order and must start after the `-s` start time.
- It is highly recommended that you specify a `-s`/`--start` and `-e`/`--end` time even when using concat. The start and end time are passed to ffmpeg to trim the video before processing the segments, greatly increasing the speed and efficiency of the concat operation.

Cut a 30 second segment out of the middle of the video starting at 1 minute:\
`python webm_for_4chan.py input.mkv input.mp4 -x "1:00-1:30"`

Cut 2 segments. Cut #1 starting at 1:00 and ending at 1:30, cut #2 starting at 1:45 and ending at 2:00:\
`python webm_for_4chan.py input.mp4 -x "1:00-1:30;1:45-2:00"`

Make a clip from 1:20:00 to 1:23:00 and cut the middle minute out, resulting in a 2 minute final clip:\
`python webm_for_4chan.py input.mp4 -s 1:20:00 -e 1:23:00 -x "1:21:00-1:22:00"`

Concatenate a segment from 1:00:05 to 1:00:10 and a segment from 1:28:30 to 1:28:45, creating a 20 second final clip:\
`python webm_for_4chan.py input.mp4 -s 1:00:00 -e 1:30:00 -c "1:00:05-1:00:10;1:28:30-1:28:45"`

### Trimming Silence
You can automatically cut silent portions of the video using `--trim_silence`. There are 4 options:
- `--trim_silence start` trims the beginning of the video, advancing the specified start time
- `--trim_silence end` trims the end of the video, reducing the specified end time or duration
- `--trim_silence start_and_end` does both of the above
- `--trim_silence all` trims all detected silence, even in the middle of the video. Note that this option overrides any manual cuts from the `-x`/`--cut` feature. This option can potentially take a long time if there are a lot of segments to cut out.

### Changing Target Size and Removing Sound
By default, the script renders up to 6MiB, 400 seconds with sound for wsg.\
To set the size limit to 4MiB, 300 seconds with sound, use `--board gif`\
To set the size limit to 4MiB, 120 seconds with no sound, use `--board other`\
Remove sound altogether with `--no_audio`\
Manually set the file size limit, in MiB, with `--size`, i.e. `--size 5` will target a 5 MiB file.\
Reduce the target bit-rate with `-b`/`--bitrate-compensation`, i.e. `-b 5` will subtract 5 kbps from the automatically calculated bit-rate. This will cause a slight reduction in file size.

### yt-dlp Integration
To download and encode a video, simply specify the url in the command line or use `--download`\
Timestamp arguments (`--start`/`--end`/`--duration`) will be passed to yt-dlp and the clip will be made directly from the download.\
(This means that the video encoder will be invoked to encode the full video)\
The script attempts to detect if the file has already been downloaded. If it has, it will not ask yt-dlp to download it again.\
The `--download_full` flag will download the full video, ignoring the `--start` and `--end` timestamps when downloading.\
Use `--ytdlp_args` to pass through custom arguments directly to yt-dlp, i.e. `--ytdlp_args "-S codec:h264"`

### Gif Caption Mode
This mode writes text in "gif caption" meme format. That is, black text on a white background above the video or gif. Note that this is an experimental feature that is not guaranteed to work correctly. It uses the [drawtext](https://ffmpeg.org/ffmpeg-filters.html#drawtext-1) filter, which requires ffmpeg compiled with `--enable-libfreetype` `--enable-libharfbuzz` and `--enable-libfontconfig`
- `--caption` takes in the caption text, which will be rendered using drawtext, i.e. `--caption "Hello world"`
  - It will automatically word-wrap and center the text, but you can force a newline with `\n`, i.e. `--caption "Hello\nWorld"`
  - You'll need to escape certain characters like exclamation mark `!` with a slash, i.e. `--caption "Hello World\!"`
- `--font` takes the name of the font you want to use, i.e `--font Impact`
- Note that caption mode also works for .gif files.
- At this time, the font size is fixed and not configurable.

### Miscellaneous Features
Make an .mp4 instead  of .webm with the `--mp4` flag or `--codec libx264`\
Enable audio volume normalization with `-n`/`--normalize`\
Disable automatic audio mixdown with `--no_mixdown` or `--mixdown same_as_source`\
Force stereo mixdown with `--stereo` or `--mixdown stereo`\
Force mono mixdown with `--mono` or `--mixdown mono`\
Skip black frames at the start of the video with `--blackframe`\
Crop using automatic edge detection with `--auto_crop`\
Crop using manually specified boundaries with `--crop`\
Automatically burn-in the first available subtitles, if any exist, with `--auto_subs`\
Print available built-in subtitles with  `--list_subs`\
Print available audio tracks with  `--list_audio`\
Specify arbitrary filters for ffmpeg with `-a`/`--audio_filter` and `-v`/`--video_filter`\
Change the number of [B-frames](https://visionular.ai/what-are-b-frames-video-compression/) with `--bframe`. This increases compression performance at the cost of some computation time. By default, B-frames are enabled and set to auto (-1). Use `--bframes 0` to disable B-frames altogether.\
If your hardware supports it, you can try [vp9](https://trac.ffmpeg.org/wiki/Hardware/VAAPI#Encode-only) and [h264](https://trac.ffmpeg.org/wiki/HWAccelIntro#NVENC) hardware acceleration  with `--codec vp9_vaapi` or `--codec h264_nvenc` respectively. Note that support for this is experimental since I can't personally get it to work on my machine, so I can't confirm that this option works properly. Your hardware needs to support `VAProfileVP9Profile0 : VAEntrypointEncSlice` through [VA-API](https://en.wikipedia.org/wiki/Video_Acceleration_API).\
For fun, try `--first_second_every_minute`, inspired by the youtube channel FirstSecondEveryMinute (Warning: This can take a while)\
Keep generated temp files with `-k`/`--keep_temp_files`

Type `--help` for a complete list of commands.

## Extra Notes and Quirks
- The script is designed to get as close to the size limit as possible, but sometimes overshoots. If this happens, a warning is printed. Video bit-rate can be adjusted with `-b`/`--bitrate_compensation`. Usually a compensation of just 2 or 3 is sufficient. If the file is undershooting by a large amount, you can also use a negative number to make the file bigger.
- Audio bit-rate is automatically reduced for long clips. Force high audio bit-rate with `--music_mode`, or specify the exact rate manually with `--audio_rate`
- If your source is surround sound, it's highly recommended to use `--music_mode` or `--stereo` especially for clips over 2:00. The default audio bit-rate is meant for stereo and can cause surround sources to sound too crunchy.
- Image + audio combine mode automatically maximizes the audio bitrate based on song length. You can still manually specify `--audio_rate`
- Fps cap is automatically reduced for long clips. You can manually specify with `--fps`
- If you don't like the automatically calculated resolution, use the `--resolution` override.
- By default, resolution remains unchanged in image + audio combine mode. You can still manually specify with `--resolution`
- Clipping (`-s`, `-e`, `-d`), `--auto_crop`, and subtitle burn-in are disabled in image + audio combine mode. You can still `--normalize` and apply arbitrary audio and video filters (`-a`, `-v`).
- It's tough to do one-size-fits-all automatic resolution scaling. Currently it is tuned to produce large resolutions, which can cause artifacts if the source has high motion or a lot of colors. If the output is a little too crunchy, I recommend specifying `--resolution` at one notch lower than what it automatically selected (you can find the resolution table at the top of the script)
- If you don't want to resize it at all, use `--no_resize`
- Dynamic resolution calculation will snap to a standard resolution size as defined in the resolution table. You can skip this with `--bypass_resolution_table`
- The resolution calculation method can be altered with `--resize_mode`. All options produce similar results, but `--resize_mode cubic` usually results in lower resolutions than the default of `logarithmic`. Instead of a bit-rate based calculation, a time-based lookup table can also be used with `--resize_mode table`. Note that this doesn't alter how ffmpeg resizes the video, it only affects what target resolution is chosen.
- If you want to see the calculations and ffmpeg commands without rendering the clip, use `--dry_run`
- You will get an error if you try to render a clip longer than the max duration of the target board. This can be disabled with `--no_duration_check`, but will result in a file not uploadable to 4chan. The max duration bypass hack for 4chan is not supported as it results in a corrupted file.
- The vp9 encoder's deadline argument is set to `good` by default. Better quality, but much slower, encoding can be achieved with `--deadline best`
- Use `--fast` to significantly speed up encoding at the expense of quality and rate control accuracy.
- Row based multithreading is enabled by default. This can be disabled with `--no_mt`
- You may notice an additional file 'temp.opus'. This is an intermediate audio file used for size calculation purposes. If normalization is enabled, 'temp.normalized.opus' will also be generated.
- With `--mp4`/`--codec libx264`, 'temp.aac' and 'temp.normalized.aac' are generated instead of .opus files.
- If any temp files already exist (such as when using `-k`), a new one will be made with an incrementing number (temp.1.opus, temp.2.opus, etc.)
- Expect size overshoots much more often with `--mp4`/`--codec libx264`. This is a result of libx264's rate control accuracy being much more sloppy than libvpx-vp9.
- When using `-x`/`--cut` or `-c`/`--concat`, a lossless temporary file of the assembled segments called 'temp.mkv' gets generated.
- When using `-x`/`--cut` or `-c`/`--concat` it is currently not possible to burn-in subtitles or to specify an audio track besides the default.
- Currently, image + audio combine mode only makes .webm files (vp9/opus), `--codec libx264` intentionally has no effect.
- The file 'temp.ass' is generated if burning in soft subs. I tried using the subs directly from the video, but this didn't work well when making clips, so I had to resort to exporting to a separate file.
- Subtitle burn-in is mostly tested with ASS subs. If external subs are in a format that ffmpeg doesn't recognize, you'll have to convert them manually.
- Audio will always be re-encoded even if the source is opus. I tried to make ffmpeg's copy option work, but it didn't work well when making clips.
- You may notice that rendering is significantly slower when burning in subtitles. I tried many different settings and ffmpeg is very fragile, this is the only method I could figure out that works consistently.

## Tips, Tricks, and References
- If you're unsure about your `-s`/`--start` and `-e`/`--end` timestamps, try a `--dry_run -k` and inspect temp.opus to see if the audio is the right slice that you want.
- Filter graph building for `-c`/`--concat` and `-x`/`--cut` were made possible through this valuable reference:
  - https://github.com/sriramcu/ffmpeg_video_editing
- Specify `--cc` when running `-c`/`--concat` or`-x`/`--cut` to keep the original file containing the spliced segments. This will save time if you are unsatisfied with the final result and need to re-encode.
- There is a known issue with some varieties of surround sound for libopus. I have attempted to detect and correct for this issue, but some features in the script are incompatible with this workaround. For more information, see:
  - https://trac.ffmpeg.org/ticket/5718
- More information on the audio normalization technique used by `-n`/`--normalize`:
  - https://wiki.tnonline.net/w/Blog/Audio_normalization_with_FFmpeg
  - https://superuser.com/questions/1312811/ffmpeg-loudnorm-2pass-in-single-line
- The `--blackframe` option uses ffmpeg's blackdetect and blackframe filters. For more information:
  - https://ffmpeg.org/ffmpeg-filters.html#blackdetect
- The `--auto_crop` option makes use of ffmpeg's cropdetect filter. For more information:
  - https://ffmpeg.org/ffmpeg-filters.html#cropdetect
- The `--trim_silence` option uses ffmpeg's silencedetect filter. For more information:
  - https://ffmpeg.org/ffmpeg-filters.html#silencedetect
- You can do basically anything you want with `-v`/`--video_filter` and `-a`/`--audio_filter` as they are passed directly to ffmpeg's -vf and -af arguments. For instance, if you want to reverse the clip, just specify `-v reverse -a areverse`
  - https://ffmpeg.org/ffmpeg-filters.html

## Testers Wanted!
I tested this as well as I can, but I don't know how well it works for others. Any feedback is welcome. If you come across a bug, please give me the printed output and provide the input file along with your command-line arguments if possible. There are a lot of quirks depending on the exact input, so having the original file goes a long way in being able to replicate the issue.

webm-for-4chan

webm-for-4chan 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

webm-for-4chan

webm-for-4chan 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README