cie-PN532

KO | EN

gitlite — search

#python #hacktoberfest #react #ai #llm #golang #android #linux #macos #java #awesome #cli #kubernetes #open-source

(★ 28)

Arduino library for SPI and I2C access to the NFC chip in the Italian Electronic Identity Card (CIE)

cie-PN532 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# cie-PN532
Arduino library for SPI access to the PN532 NFC chip in the Italian Electronic Identity Card (CIE).

___
![Warning](https://raw.githubusercontent.com/italia/cie-PN532/master/images/warning.png "This library does NOT yet detect cloned cards")
___

## Online resources
[![Online documentation](https://raw.githubusercontent.com/italia/cie-PN532/master/images/documentation.png "Online documentation")](https://cie-pn532.azurewebsites.net) [![Demonstration video](https://raw.githubusercontent.com/italia/cie-PN532/master/images/video.png "Demonstration video")](https://www.youtube.com/watch?v=xGILUdw0EKQ)

## Prerequisites
This library depends upon a modified version of the **Adafruit_PN532** library which you can obtain from this GitHub Repository.

https://github.com/BrightSoul/Adafruit-PN532

You must install the Adafruit_PN532 and cie_PN532 in your Arduino _libraries_ directory.
Plese follow the instructions from the Arduino guide.

https://www.arduino.cc/en/Guide/Libraries

## Wiring PN532 breakout to the Arduino Uno for SPI communication
At present, just the SPI connection is supported. The examples provided will work with this wiring.

![images/pn532-wiring-spi.png](https://raw.githubusercontent.com/italia/cie-PN532/master/images/pn532-wiring-spi.png)

This wiring is also described in detail on this page at the Adafruit website.

https://learn.adafruit.com/adafruit-pn532-rfid-nfc/breakout-wiring

## Getting started

Create a new arduino project and set it up like this:
```C++
//Include some libraries
#include <Wire.h>
#include <SPI.h>
#include <cie_PN532.h>

//Use the cie_PN532 with the typical wiring, as pointed out above
cie_PN532 cie();

void setup(void) {
  #ifndef ESP8266
    while (!Serial); // for Leonardo/Micro/Zero
  #endif
  Serial.begin(115200);
  //Initialize the PN532 breakout board
  cie.begin();
}
```
Then, in your loop, wait for a card then read its ID_Servizi (a low-security unique identifier)

```C++
void loop(void) {
  //Let's see if a card is present
  bool cardDetected = cie.detectCard();
  if (!cardDetected) {
    //No card present, we wait for one
    delay(100);
    return;
  }

//Good! A card is present, let's read the ID!
  word bufferLength = EF_ID_SERVIZI_LENGTH;
  byte buffer[EF_ID_SERVIZI_LENGTH];

if (!cie.read_EF_ID_Servizi(buffer, &bufferLength)) {
    Serial.print(F("Error reading EF.ID_SERVIZI"));
    delay(1000);
    return;
  }

//We were able to read the ID_Servizi, print it out!
  Serial.print(F("EF.ID_Servizi: "));
  cie.printHex(buffer, bufferLength);
}
```

## More examples
This library comes with an _examples_ directory. You can load and run examples from the Arduino IDE by clicking the File menu -> Examples -> cie 532.

## Useful links
 * The CIE 3.0 chip specification (italian)

http://www.agid.gov.it/sites/default/files/documentazione/cie_3.0_-_specifiche_chip.pdf

* Technical specification for the European Card for e-Services and National e-ID Applications

http://www.unsads.com/specs/IASECC/IAS_ECC_v1.0.1_UK.pdf

* Specifiche tecniche del documento digitale unificato (italian)
 
 http://www.agid.gov.it/sites/default/files/leggi_decreti_direttive/specifiche_tecniche_del_documento_digitale_unificato_v.1.0.0.pdf

cie-PN532

cie-PN532 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

cie-PN532

cie-PN532 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README