KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #developer-tools #react #windows #deepseek-harness #ai-agent

dsp-408-ui

★ 32 Open GitHub ↗

A modern way to connect and tweak your T.Racks DSP 408.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# dsp-408-ui

This application presents a neat and easy way to interface with the t.racks 408 Digital Signal Processor
(DSP). This software communicates over the local intranet and mimics communications sent by the t.racks
DSP Processor Editor software provided by Thomann. The goal is to turn one of the cheapest and most
versatile pieces of live music hardware into something that is capable of having robust mixing
functionality over a wide array of platforms.

## Supported Platforms

**In Active Development:**
- t.racks DSP 408
- Windows
- Android

**Untested:**
- iOS (but it theoretically works)
- MacOS (but it theoretically works)
- t.racks DSP 204 (probably doesn't work yet--will work on this later)

## Feature Parity

**Features that work:**
- Save & Load Presets
- Gain
    - Volume Adjust Channels
    - Volume Visualizer Channels
    - Mute/Unmute Channels
- Matrix
    - Assign Inputs -> Outputs
- GEQ

**Features that are in active development:**
- Gain
    - Invert Phase Toggle
- Matrix
    - Volume attenuation for inputs
- Gate
- Compressor
- Limit
- Delay
- PEQ:
    - In A, B, C, and D
    - Out 1, 2, 3, 4, 5, 6, 7, 8

## Getting Started

### Prerequisites
Ensure that Flutter is installed on your computer and available on your `$PATH`. You will need:
- Flutter - 3.38.9
- Dart - 3.10.8

Run setup:
```
$ make setup
```

### Building for Windows (.exe)
```
$ make build-windows
```
The `.exe` will be at `./build/windows/x64/runner/Release/`.

### Building for Linux
```
$ make build-linux
```
The executable will be at `./build/linux/x64/release/bundle/`.

### Building for Android (.apk)
```
$ make build-android
```
The `.apk` will be at `./build/app/outputs/flutter-apk/app-release.apk`.

### Running
Connect your DSP to your local network. Launch the app and input the IP address of the DSP in the field.

dsp-408-ui

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README