KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #ai-agents #developer-tools #ai-agent #claude-code #mcp #typescript #codex #cli #rust #deepseek-harness

LVI-SAM

★ 1,872 Open GitHub ↗

LVI-SAM: Tightly-coupled Lidar-Visual-Inertial Odometry via Smoothing and Mapping

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# LVI-SAM

This repository contains code for a lidar-visual-inertial odometry and mapping system, which combines the advantages of [LIO-SAM](https://github.com/TixiaoShan/LIO-SAM/tree/a246c960e3fca52b989abf888c8cf1fae25b7c25) and [Vins-Mono](https://github.com/HKUST-Aerial-Robotics/VINS-Mono) at a system level.

---

## Dependency

- [ROS](http://wiki.ros.org/ROS/Installation) (Tested with kinetic and melodic)
- [gtsam](https://gtsam.org/get_started/) (Georgia Tech Smoothing and Mapping library)
  ```
  sudo add-apt-repository ppa:borglab/gtsam-release-4.0
  sudo apt install libgtsam-dev libgtsam-unstable-dev
  ```
- [Ceres](https://github.com/ceres-solver/ceres-solver/releases) (C++ library for modeling and solving large, complicated optimization problems)
  ```
  sudo apt-get install -y libgoogle-glog-dev
  sudo apt-get install -y libatlas-base-dev
  wget -O ~/Downloads/ceres.zip https://github.com/ceres-solver/ceres-solver/archive/1.14.0.zip
  cd ~/Downloads/ && unzip ceres.zip -d ~/Downloads/
  cd ~/Downloads/ceres-solver-1.14.0
  mkdir ceres-bin && cd ceres-bin
  cmake ..
  sudo make install -j4
  ```

### Getting start with Docker

When you use Docker, you could solve the dependency at once.  
For more information, you can check [docker_start.md](./docker/docker_start.md).

---

## Compile

You can use the following commands to download and compile the package.

```
cd ~/catkin_ws/src
git clone https://github.com/TixiaoShan/LVI-SAM.git
cd ..
catkin_make
```

---

## Datasets

The datasets used in the paper can be downloaded from Google Drive. The data-gathering sensor suite includes: Velodyne VLP-16 lidar, FLIR BFS-U3-04S2M-CS camera, MicroStrain 3DM-GX5-25 IMU, and Reach RS+ GPS.

```
https://drive.google.com/drive/folders/1q2NZnsgNmezFemoxhHnrDnp1JV_bqrgV?usp=sharing
```

**Note** that the images in the provided bag files are in compressed format. So a decompression command is added at the last line of ```launch/module_sam.launch```. If your own bag records the raw image data, please comment this line out.

**New:** more datasets are available at [LVI-SAM-Easyused](https://github.com/Cc19245/LVI-SAM-Easyused).

---

## Run the package

1. Configure parameters:

```
Configure sensor parameters in the .yaml files in the ```config``` folder.
```

2. Run the launch file:
```
roslaunch lvi_sam run.launch
```

3. Play existing bag files:
```
rosbag play handheld.bag 
```

---

## Related Packages

- [LVI_SAM_fixed by epicjung](https://github.com/epicjung/LVI_SAM_fixed)
  - [LVI-SAM-modified by skyrim835](https://github.com/skyrim835/LVI-SAM-modified)
  - [LVI-SAM-Easyused by Cc19245](https://github.com/Cc19245/LVI-SAM-Easyused)

---

## TODO

- [ ] Update graph optimization using all three factors in imuPreintegration.cpp, simplify mapOptimization.cpp, increase system stability

---

## Paper

Thank you for citing our [paper](./doc/paper.pdf) if you use any of this code or datasets.

```
@inproceedings{lvisam2021shan,
  title={LVI-SAM: Tightly-coupled Lidar-Visual-Inertial Odometry via Smoothing and Mapping},
  author={Shan, Tixiao and Englot, Brendan and Ratti, Carlo and Rus Daniela},
  booktitle={IEEE International Conference on Robotics and Automation (ICRA)},
  pages={5692-5698},
  year={2021},
  organization={IEEE}
}
```

---

## Acknowledgement

- The visual-inertial odometry module is adapted from [Vins-Mono](https://github.com/HKUST-Aerial-Robotics/VINS-Mono).
  - The lidar-inertial odometry module is adapted from [LIO-SAM](https://github.com/TixiaoShan/LIO-SAM/tree/a246c960e3fca52b989abf888c8cf1fae25b7c25).

LVI-SAM

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README