MediatR.Behaviors.Authorization - GitLite

KO | EN

gitlite — search

#javascript #ai #llm #android #machine-learning #deep-learning #docker #macos #awesome #awesome-list #vue #security #ios #openai

MediatR.Behaviors.Authorization

(★ 107)

A simple request authorization package that allows you to build and run request specific authorization requirements before your request handler is called.

File Explorer

Download Latest Version (.zip)

- - GlobalAuthorizerExample.csproj
  - Program.cs
- - RequestAuthorizationBehavior.cs
- - AuthorizationPipelineHandlerOptions.cs
  - DefaultUnauthorizedHandlerStrategy.cs
- - UnauthorizedException.cs
- - IAuthorizationHandler.cs
  - IAuthorizationRequirement.cs
  - IAuthorizer.cs
  - IUnauthorizedResultHandler.cs
- - AbstractRequestAuthorizer.cs
  - AuthorizationResult.cs
- MediatR.Behaviors.Authorization.csproj
- - MediatR.Behaviors.Authorization.Tests.csproj
.gitignore
LICENSE
MediatR.Behaviors.Authorization.sln
README.md

# Installation Guide

1. Get the code

git clone https://github.com/AustinDavies/MediatR.Behaviors.Authorization

Downloads the entire project code from GitHub to your computer.

cd MediatR.Behaviors.Authorization

Moves into the project folder you just downloaded.

2. .NET

Medium Recommended

Prerequisites

Git Needed to download the project code from GitHub.
.NET SDK The SDK required for the dotnet command.

dotnet add package MediatR.Behaviors.Authorization

Type this command into your terminal and run it.

✅ After dotnet run, check the message or address shown in the terminal.

Pulled directly from this repo's README.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# MediatR.Behaviors.Authorization

[![NuGet](https://img.shields.io/nuget/v/MediatR.Behaviors.Authorization.svg)](https://www.nuget.org/packages/MediatR.Behaviors.Authorization/)

A simple request authorization package that allows you to build and run request specific authorization requirements before your request handler is called. You can read my [article][article] on the reasoning for this library for further analysis.

## Installation

Using the [.NET Core command-line interface (CLI) tools][dotnet-core-cli-tools]:

```sh
dotnet add package MediatR.Behaviors.Authorization
```

Using the [NuGet Command Line Interface (CLI)][nuget-cli]:

```sh
nuget install MediatR.Behaviors.Authorization
```

Using the [Package Manager Console][package-manager-console]:

```powershell
Install-Package MediatR.Behaviors.Authorization
```

From within Visual Studio:

1. Open the Solution Explorer.
2. Right-click on a project within your solution.
3. Click on *Manage NuGet Packages...*
4. Click on the *Browse* tab and search for "MediatR.Behaviors.Authorization".
5. Click on the MediatR.Behaviors.Authorization package, select the latest version in the
   right-tab and click *Install*.

## Getting Started

### Dependency Injection

You will need to register the authorization pipeline along with all implementations of `IAuthorizer`:

```c#
using MediatR.Behaviors.Authorization.Extensions.DependencyInjection;

public class Startup
{
	//...
	public void ConfigureServices(IServiceCollection services)
	{
		// Adds the transient pipeline behavior and additionally registers all `IAuthorizationHandlers` for a given assembly
		services.AddMediatorAuthorization(Assembly.GetExecutingAssembly());
		// Register all `IAuthorizer` implementations for a given assembly
		services.AddAuthorizersFromAssembly(Assembly.GetExecutingAssembly())

}
}
```
You can use the helper method to register 'IAuthorizer' implementations from an assembly or manually inject them using Microsoft's DI methods.

## Example Usage

Scenario: We need to get details about a specific video for a course on behalf of a user. However, this video course information is considered privileged information and we only want users with a subscription to that course to have access to the information about the video.

### Creating an Authorization Requirement `IAuthorizationRequirement`

Location: `~/Application/Authorization/MustHaveCourseSubscriptionRequirement.cs`

You can create custom, reusable authorization rules for your MediatR requests by implementing `IAuthorizationRequirement` and `IAuthorizationHandler<TAuthorizationRequirement>`:

```c#
public class MustHaveCourseSubscriptionRequirement : IAuthorizationRequirement
    {
        public string UserId { get; set; }
        public int CourseId { get; set; }

class MustHaveCourseSubscriptionRequirementHandler : IAuthorizationHandler<MustHaveCourseSubscriptionRequirement>
        {
            private readonly IApplicationDbContext _applicationDbContext;

public MustHaveCourseSubscriptionRequirementHandler(IApplicationDbContext applicationDbContext)
            {
                _applicationDbContext = applicationDbContext;
            }

public async Task<AuthorizationResult> Handle(MustHaveCourseSubscriptionRequirement request, CancellationToken cancellationToken)
            {
                var userId = request.UserId;
                var userCourseSubscription = await _applicationDbContext.UserCourseSubscriptions
                    .FirstOrDefaultAsync(x => x.UserId == userId && x.CourseId == request.CourseId, cancellationToken);

if (userCourseSubscription != null)
                    return AuthorizationResult.Succeed();

return AuthorizationResult.Fail("You don't have a subscription to this course.");
            }
        }
    }
```
In the preceding listing, you can see this is your standard MediatR Request/Request Handler usage; so you can treat the whole affair as you normally would. It is important to note you must return `AuthorizationResult` You can fail two ways: `AuthorizationResult.Fail()` or `AuthorizationResult.Fail("your message here")` and you can pass using `AuthorizationResult.Succeed()`

### Basic MediatR Request

Location: `~/Application/Courses/Queries/GetCourseVideoDetail/GetCourseVideoDetailQuery.cs`

```c#
public class GetCourseVideoDetailQuery : IRequest<CourseVideoDetailVm>
    {
        public int CourseId { get; set; }
        public int VideoId { get; set; }
        
        class GetCourseVideoDetailQueryHandler : IRequestHandler<GetCourseVideoDetailQuery>
        {
            private readonly IApplicationDbContext _applicationDbContext;

public GetCourseVideoDetailQueryHandler(IApplicationDbContext applicationDbContext)
            {
                _applicationDbContext = applicationDbContext;
            }

public async Task<CourseVideoDetailVm> Handle(GetCourseVideoDetailQuery request, CancellationToken cancellationToken)
            {
                var video = await _applicationDbContext.CourseVideos
                    .FirstOrDefaultAsync(x => x.CourseId == request.CourseId && x.VideoId == request.VideoId, cancellationToken);

return new CourseVideoDetailVm(video);
            }
        }
    }
```

### Creating the `IAuthorizer`

Location: `~/Application/Courses/Queries/GetCourseVideoDetail/GetCourseVideoDetailAuthorizer.cs`

```c#
public class GetCourseVideoDetailAuthorizer : AbstractRequestAuthorizer<GetCourseVideoDetailQuery>
    {
        private readonly ICurrentUserService _currentUserService;

public GetCourseVideoDetailAuthorizer(ICurrentUserService currentUserService)
        {
            _currentUserService = currentUserService;
        }

public override void BuildPolicy(GetCourseVideoDetailQuery request)
        {
            UseRequirement(new MustHaveCourseSubscriptionRequirement
            {
                CourseId = request.CourseId,
                UserId = _currentUserService.UserId
            });
        }
    }
```
The usage of `AbstractRequestAuthorizer<TRequest>` will usually be preferable; this abstract class does a couple things for us. It takes care of initializing and adding new requirements to the `Requirements` property through the `UseRequirement(IAuthorizationRequirement)`, finally, it still forces the class extending it to implement the `IAuthorizer.BuildPolicy()` method which is very important for passing the needed arguments to the authorization requirement that handles the authorization logic.

## Overriding the Default Unauthorized Behavior

When a requirement is not met (i.e., IsAuthorized is false), the default behavior is to throw an `UnauthorizedException`. You can change this by creating a class which implements the `Invoke` method of the `IUnauthorizedResultHandler` interface:

```c#
public class ExampleUnauthorizedResultHandler : IUnauthorizedResultHandler
    {
        public Task<TResponse> Invoke<TResponse>(AuthorizationResult result)
        {
            return Task.FromResult(default(TResponse));
        }
    }
```

Once you have created your custom `IUnauthorizedResultHandler`, you will need to configure the options during IoC setup:

```c#
using MediatR.Behaviors.Authorization.Extensions.DependencyInjection;

public class Startup
{
	//...
	public void ConfigureServices(IServiceCollection services)
	{
		// Use the options overload method to configure your custom `IUnauthorizedResultHandler`
		services.AddMediatorAuthorization(Assembly.GetExecutingAssembly(), 
            cfg => cfg.UseUnauthorizedResultHandlerStrategy(new ExampleUnauthorizedResultHandler));
	}
}
```

The `ExampleUnauthorizedResultHandler` is a very basic example. Some reasons why you may want to override the default unauthorized behavior can include (but not limited to):
* Throwing a different exception type
* Attaching additional behavior such as raising an event.
* If you are using a discriminated union library (e.g., OneOf, FluentResults, ErrorOr) in conjuction with your MediatR requests.

For any requests, bug or comments, please [open an issue][issues] or [submit a
pull request][pulls].

[dotnet-core-cli-tools]: https://docs.microsoft.com/en-us/dotnet/core/tools/
[issues]: https://github.com/AustinDavies/MediatR.Behaviors.Authorization/issues/new
[nuget-cli]: https://docs.microsoft.com/en-us/nuget/tools/nuget-exe-cli-reference
[package-manager-console]: https://docs.microsoft.com/en-us/nuget/tools/package-manager-console
[pulls]: https://github.com/AustinDavies/MediatR.Behaviors.Authorization/pulls
[article]: https://levelup.gitconnected.com/handling-authorization-in-clean-architecture-with-asp-net-core-and-mediatr-6b91eeaa4d15