MicroCOM

KO | EN

gitlite — search

#hacktoberfest #ai #typescript #android #machine-learning #deep-learning #macos #nodejs #awesome #cli #vue #pytorch #mcp #open-source

(★ 45)

Serial UART communication software for the M5Cardputer

MicroCOM Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# MicroCOM

Microcom is a lightweight serial UART communication software for the M5Cardputer. This allows users to configure and manage serial communication with external devices over UART.

![MicroCOM in use](https://raw.githubusercontent.com/geo-tp/MicroCOM/main/image.jpg)

## Features:
- Easy configuration for baud rate, data bits, parity, stop bits, flow control, and inverted signal settings.
- Send and receive serial data

## Installation
- M5Burner : Search into M5CARDPUTER section and simply burn it
- Github : Get the firmware from the latest github release.

## Pin Configuration:
The pins used are on the Grove connector:

- RX Pin: GPIO1 (can be changed in the configuration menu)
- TX Pin: GPIO2 (can be changed in the configuration menu)

You could use Grove/Dupont connector to interface with the Cardputer:

![Grove to Dupont](https://raw.githubusercontent.com/geo-tp/MicroCOM/main/grovedupont.jpg)

## Keybinds:

- Config: Use `Arrows` and `OK` button to toggle configuration options.
- Terminal: Use `Keys` and `OK` button to send commands

## ⚠️ Caution:

The M5Cardputer operate at 3.3V logic levels. Connecting any UART device that uses a different voltage can damage the device. Always ensure that your connected UART device that uses 3.3V.

MicroCOM

MicroCOM Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

MicroCOM

MicroCOM Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README