OBD2-ECU-Simulator

KO | EN

gitlite — search

#javascript #hacktoberfest #react #typescript #go #android #rust #linux #nodejs #awesome #cli #vue #pytorch #open-source

OBD2-ECU-Simulator

(★ 68)

Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'

OBD2-ECU-Simulator 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# OBD2-ECU-Simulator
Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'

## Hardware required
-Ardunio Uno 
-MCP2515 or MCP25625 shield or controller 
-OBD2 to DB9 cable, buy or make your own

## Build Depends 
-MCP_CAN Library https://github.com/coryjfowler/MCP_CAN_lib 
-QT5 https://www.qt.io/

## Status
-Custom VIN 
-Custom Calibration ID 
-Custom ECU Name 
-Set OBD2 Standard 
-Set Fuel type coding 
-Supported PID's 0x05, 0x0C, 0x0D, 0x0E, 0x0F, 0x10 
-Random PID's 
-Retrive DTC *one only 
-Clear DTC

Currently the Ardunio source is in random value standalone mode. Can view the raw frames << >> via serial monitor in the Ardunio IDE.

## Todo
-Complete GUI 
-Wire up Firmware with GUI 
-Add more PID'S 
-Implement a more dynamic DTC

## Tested With
-ELM327 USB with Torque ‘Android’ 
-Foxwell NT650

## Instructions
The CAN shield or controller needs to have it’s CAN_H and CAN_L Terminated. On my shield I had to solder join ‘J3’. 
Check the documentation of your CAN controller.

OBD2-ECU-Simulator

OBD2-ECU-Simulator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

OBD2-ECU-Simulator

OBD2-ECU-Simulator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README