papaya-pathfinder

KO | EN

gitlite — search

#python #nodejs #react #javascript #typescript #rust #python3 #recommender-system #simulation #docker #azure #music

papaya-pathfinder

★ 39 Open GitHub ↗

Papaya Pathfinder is an open-source, fully 3D-printable rover platform based on ESP32, featuring multiple rover variants and supporting both WiFi and ExpressLRS (ELRS) control via interchangeable firmware

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Papaya Pathfinder

Papaya Pathfinder is an open-source family of small remote-controlled rovers based on the **ESP32**.

The project currently includes **two rover variants**, designed for different sizes, motors, and power requirements.

All mechanical parts of the rovers are fully **3D-printable**, and all models are available in the `3d-models/` directories of each rover variant.

The rovers can be operated using either **WiFi** or **ExpressLRS (ELRS)**, depending on the firmware configuration.

**Watch the Papaya Pathfinder demo on YouTube**
<div align="center">
  <a href="https://www.youtube.com/watch?v=BrZb676o0gw" target="_blank">
    <img src="https://img.youtube.com/vi/BrZb676o0gw/0.jpg"
         alt="Papaya Pathfinder - Demo Video"
         width="600"/>
  </a>
</div>

## Papaya Pathfinder

- **Controller:** ESP32
- **Radio:** ELRS receiver *(required only when running `firmware-elrs`)*
- **Motor Drivers:** 2× BTS7960 43A (or similar high-current driver)
- **Motors:** 6× GA25 DC gear motors
- **Steering:** 4× MS24 servos
- **Power:** LiPo 3S Battery
- **Voltage Regulation:**
  - 1× UBEC 5V/3A (for ESP32)
  - 1× UBEC 6V/8A (High current supply for Servos)

### Firmware
The rover supports multiple firmware configurations, each enabling a different communication method.

- **[`firmware-wifi`](pathfinder/firmware-wifi/)**
  - WiFi-based control
  - HTTP API for movement commands
  - Compatible controllers:
    - **[Python desktop controller](desktop-controller/)** — sends gamepad-based control commands to the rover via HTTP.
    - **[Android mobile app](android-controller/)** — enables rover control using a gamepad, providing the same driving experience available on the desktop controller.

- **[`firmware-elrs`](pathfinder/firmware-elrs/)**
  - Control via **ExpressLRS (ELRS)**

### 3D-Printed Parts
[![Printables](https://img.shields.io/badge/Printables-Download%20STLs-orange?logo=printables&logoColor=white)](https://www.printables.com/model/1564819-papaya-pathfinder-open-source-esp32-rover)
<div style="text-align: center;">
  <img src="pathfinder/cad/model.png" alt="Papaya Pathfinder model" width="600"/>
</div>

All STL files for this rover are available in: **[`pathfinder/3d-models/`](pathfinder/3d-models/)**

The complete mechanical design is also available in **STEP format**: **[`pathfinder/cad/papaya-pathfinder.step`](pathfinder/cad/papaya-pathfinder.step)**

Use **PETG or PLA** for the structural parts, and **TPU** for the tires. All parts are designed to be assembled using **M3 screws and nuts**.

| File                | Qty | Material | Notes                                                  |
|---------------------|-----|--------|--------------------------------------------------------|
| `body.stl`          | 1   | PETG / PLA | Main chassis                                           |
| `arm_left.stl`      | 1   | PETG / PLA | Left suspension arm                                    |
| `arm_right.stl`     | 1   | PETG / PLA | Right suspension arm                                   |
| `pivot_left.stl`    | 1   | PETG / PLA | Left pivot mount                                       |
| `pivot_right.stl`   | 1   | PETG / PLA | Right pivot mount                                      |
| `differential_bar.stl` | 1   | PETG / PLA | Central rocker-bogie differential bar                  |
| `differential_link_left.stl` | 1   | PETG / PLA | Left link between differential bar and suspension arm  |
| `differential_link_right.stl` | 1   | PETG / PLA | Right link between differential bar and suspension arm |
| `motor_mount.stl`   | 4   | PETG / PLA | Motor mounts for GA25 motors used on steering arms     |
| `horn_adapter.stl`  | 4   | PETG / PLA | Servo horn adapters for steering servos. **Print horizontally for strength.**              |
| `rim.stl` | 6 | PETG / PLA | **Standard option.** Connects directly to the motor shaft (D-shape). Simple, but can strip over time under high torque. |
| `rim_hexagonal.stl` | 6 | PETG / PLA | **Pro option (Recommended).** Requires **12mm brass hex adapters**. Much stronger connection, prevents the motor shaft from stripping the plastic. |
| `tire.stl`   | 6 | TPU | Tires                                                  |

### Wiring Diagram
- Power Distribution: Shows the rover power distribution, including the LiPo 3S battery,
  separate UBECs for logic (5V) and servos (6V), and the motor power rails.
<div style="text-align: center;">
  <img src="pathfinder/schematics/power_distribution.png" alt="Papaya Pathfinder power distribution"/>
</div>

- Motors: Motor wiring using two BTS7960 drivers, each controlling one side of the rover.
  The ESP32 provides PWM control signals to each driver.
<div style="text-align: center;">
  <img src="pathfinder/schematics/motors.png" alt="Papaya Pathfinder motors"/>
</div>

- Servos: Servo wiring powered by a dedicated 6V UBEC. PWM control signals are provided by the ESP32.
<div style="text-align: center;">
  <img src="pathfinder/schematics/servos.png" alt="Papaya Pathfinder servos"/>
</div>

- System Overview: High-level overview of the complete rover wiring, combining power,
  motor drivers, servos and control logic.
<div style="text-align: center;">
  <img src="pathfinder/schematics/overview.png" alt="Papaya Pathfinder overview"/>
</div>

---

## Papaya Pathfinder Mini

- **ESP32 with camera (ESP32-CAM / ESP32-S3-CAM)** *(required only when running `firmware-wifi`)*
- **ELRS receiver** *(required only when running `firmware-elrs`)*
- **6× N20 DC gear motors**
- **Power supply: LiPo 2S**
- **Voltage regulation:**
  - 1× DC-DC step-down to **5V** (ESP32 / ESP32-CAM)
  - 1× DC-DC step-down to **6V** (N20 motors)

### Firmware
The rover supports multiple firmware configurations, each enabling a different communication method.

- **[`firmware-wifi`](pathfinder-mini/firmware-wifi/)**
  - WiFi-based control
  - HTTP API for movement commands
  - Live video streaming over WiFi
  - Compatible controllers:
    - **[Python desktop controller](desktop-controller/)** — displays the live video stream and sends gamepad-based control commands to the rover via HTTP.
    - **[Android mobile app](android-controller/)** — displays the live video stream and enables rover control using a gamepad, providing the same driving experience available on the desktop controller.

- **[`firmware-elrs`](pathfinder-mini/firmware-elrs/)**
  - Control via **ExpressLRS (ELRS)**

### 3D-Printed Parts
[![Printables](https://img.shields.io/badge/Printables-Download%20STLs-orange?logo=printables&logoColor=white)](https://www.printables.com/model/1564810-papaya-pathfinder-mini-open-source-esp32-rover)
<div style="text-align: center;">
  <img src="pathfinder-mini/cad/model.png" alt="Papaya Pathfinder Mini model" width="600"/>
</div>

All STL files for this rover are available in: **[`pathfinder-mini/3d-models/`](pathfinder-mini/3d-models/)**

The complete mechanical design is also available in **STEP format**: **[`pathfinder-mini/cad/papaya-pathfinder-mini.step`](pathfinder-mini/cad/papaya-pathfinder-mini.step)**

Use **PETG or PLA** for the structural parts, and **TPU** for the tires. All parts are designed to be assembled using **M3 screws and nuts**.

| File                | Qty | Material | Notes                                                      |
|---------------------|-----|------|------------------------------------------------------------|
| `body.stl`          | 1 | PETG / PLA | Main chassis                                               |
| `arm_left.stl`      | 1 | PETG / PLA | Left suspension arm                                        |
| `arm_right.stl`     | 1 | PETG / PLA | Right suspension arm                                       |
| `pivot_left.stl`    | 1 | PETG / PLA | Left pivot mount                                           |
| `pivot_right.stl`   | 1 | PETG / PLA | Right pivot mount                                          |
| `differential_bar.stl`  | 1   | PETG / PLA | Central differential bar for the rocker-bogie suspension   |
| `differential_link.stl` | 2   | PETG / PLA | Links between the differential bar and each suspension arm |
| `motor_retainer.stl` | 6 | PETG / PLA | Holds each N20 motor                                       |
| `rim.stl`       | 6 | PETG / PLA | Wheel rims                                                 |
| `tire.stl`   | 6 | TPU | Tires

### Wiring Diagram

- System Overview: High-level overview of the complete rover wiring, combining power,
  motor drivers and control logic.
<div style="text-align: center;">
  <img src="pathfinder-mini/schematics/overview.png" alt="Papaya Pathfinder Mini overview"/>
</div>

## License

This project is licensed under the **Apache License 2.0**.  
See the [LICENSE](LICENSE) file for details.

papaya-pathfinder

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README