KO
|
EN
gitlite — search
Search
#javascript
#python
#hacktoberfest
#react
#ai
#typescript
#llm
#go
#golang
#android
#machine-learning
#rust
#deep-learning
#linux
commOgServiceGUI
★ 8
Open GitHub ↗
No description available.
Download README (.md)
Explore Similar Repositories
B-cells-scRNAseq-in-BC
:
No description available.
vue-simple-verify
:
Vue简易滑动验证组件
Animation-Challenge
:
for Behnam Mohammadi's challenge
sassConvertLess
:
sass convert to less，把目录下的所有sass文件转less文件
NeuMorphism
:
No description available.
// repository documentation
Was this content helpful?
★ 0
(0 ratings)
Select Rating:
★
★
★
★
★
Submit Feedback
Recent Feedback
×
Download README
Do you want to download the
README.md
file for
commOgServiceGUI
?
Download (.md)
# ReadMe ## How to run 1. Navigate to "build" folder and call "java -jar commOgServiceGUI.jar" or compile the code yourself and run it<br/> 2. Place params.txt file in dji-firmware-tools folder<br/> 3. Put all paramters of interest into params.txt in each line (examples are in). Not all parameters are supported by each Aircraft.<br/> 4. Start commOgServiceGUI.jar<br/> 5. Choose path to dji-firmware-tools in the GUI<br/> 6. Select the port of the connected Aircraft (sometimes you have to start DJI Assistant before and then close it to enable a connection like on Mavic Mini)<br/> 7. Select your Aircraft<br/> 8. Load the paramaters from file by clicking "Refresh"<br/> 9. Select a parameter and the values will be loaded if possible. Otherwise there will be an Errormessage<br/> 10. Change the value and press "Set Value" to set it. Ensure that you are within the range of maximum and minimum value<br/><br/><br/> ## Information This tool was tested on Windows 8.1 with Mavic Mini Aircraft. ## Disclaimer SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
