rosettadrone

KO | EN

gitlite — search

#ai #typescript #golang #machine-learning #deep-learning #linux #macos #java #awesome #kubernetes #awesome-list #security #pytorch #mcp

(★ 127)

Android-based mavlink wrapper for DJI drones

파일 탐색기

최종 버전 다운로드 (.zip)

파일 수가 많아 일부만 표시됩니다. 전체 파일은 위 다운로드 버튼으로 확인해 주세요.

- modules.xml
- .gitignore
- build.gradle
- CMakeLists.txt
- proguard-rules.pro
.gitattributes
.gitignore
INTENT.md
LICENSE
README.md

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Ths repo deprecated

DIU is no longer maintaining this product.

Another team has forked the project and is actively maintaining it at https://github.com/The1only/rosettadrone

# Rosetta Drone

Rosetta Drone is a Mavlink wrapper for the DJI SDK, which allows users to fly DJI drones using Mavlink-speaking ground control stations. In theory it should work with any Mavlink GCS, but all testing so far has been done with QGroundControl.

*** IMPORTANT SAFETY NOTE *** Due to imperfect translation between DJI and Mavlink, props may begin spinning at unexpected times. Always treat props as if they are live. Use Rosetta Drone's "safety" feature, which *should* prevent the drone from acknowledging unexpected GCS arm or takeoff commands.

The user assumes all responsibility for prevention of harm or damage. This is an evolving, experimental app. See "Known issues" below before use.

# Features

* Report telemetry in QGC like position, attitude, relative altitude, heading, and battery remaining
* Command Return-to-Launch from QGC
* View drone video feeds in QGC or forward RTP to an IP address of your choice (currently Mavic Pro only)
* Create and fly waypoint missions

# Usage

## Setup (QGroundControl)

1. Connect your Android phone to a DJI transmitter and power on your DJI drone.

2. Start Rosetta Drone. The DJI light in the top-right will turn green if the app is successfully communicating with your drone.

3. If you wish to use QGroundControl on an external device, click the Gear icon to access Settings, check **Use GCS on an external device**, then specify an IP address.

4. Start QGroundControl. A telemetry connection should be immediately established, and the GCS light in Rosetta Drone will turn green. 
Note that if you are using QGroundControl on the same device as RosettaDrone, the GCS light may not turn green if QGC is in the background.

5. To start video:

a. Click the "Q" icon in the top-left corner of QGC
    
    b. Under **Video** change **Video Source** to **UDP Video Stream**.
    
    c. Change **UDP Port** to 5600.

6. Takeoff is recommended using the RC transmitter. To arm or takeoff from the GCS, click the **SAFETY ENABLED** button. It will turn green and say **READY TO FLY**. Then use the QGroundControl **Takeoff** or **Start Mission** function.

7. After flight, ensure the safety is enabled before approaching props.

# Building from source

1. Clone or download the repository.

2. In Android Studio, select **File->New->Import Project** and navigate to the downloaded folder.
 
3. Sign up for the DJI Developer Program at https://developer.dji.com/mobile-sdk/ and create an Application key. The package name should be sq.rogue.rosettadrone.
 
4. Create a new file called keys.xml in the /values folder, and insert the following:
    ```
    <?xml version="1.0" encoding="utf-8"?>
    <resources>
        <string name="dji_key">INSERT KEY HERE</string>
    </resources>
    ```
    
5. Run **Build->Make Project**

# DJI-Mavlink Translation Notes

Anyone who speaks multiple languages knows that translations are rarely perfect. The same is the case here.

- The **ARM** button in QGC does not work, by design. Sending a "Takeoff" or "Start Mission" command from QGC will arm the motors and takeoff.

- DJI reports heading in True, which RosettaDrone passes along in vfr_hud.hdg. The mavlink protocol does not specify magnetic or true.

- DJI and Mavlink use different scales to characterize GPS accuracy. DJI also does not report hdop or vdop.

- Radio signal strength is not yet implemented

- RosettaDrone reports groundspeed and airspeed as the same, and does no wind correction

- There is currently no way to turn the video camera on or off in QGC, but DJI controllers will still work fine

- The only implemented waypoint actions include delaying at a waypoint, taking a photo, or changing the gimbal pitch

# Known Issues for Users

- Occassionally RosettaDrone will loop through repeated "Connecting to drone..." messages upon plugging in a drone. We believe this is a bug in the DJI SDK. Try restarting the drone, killing RosettaDrone, and restarting it. If that doesn't work, reinstalling the app clears caches and usually solves the problem.

- If you change the UDP port while QGC is running, you may need to restart QGC

# Known Issues for Developers

RosettaDrone uses MAVLink code generated by the MAVLink code generator, using the ArduPilot dialect. The Java code generator contains errors (see issues [#805](https://github.com/mavlink/mavlink/issues/805) and [#806](https://github.com/mavlink/mavlink/issues/806)), and the code required manual tweaking after generation. This means that simply dropping in updated auto-generated files will likely produce errors.

The use of an ArduPilot dialect over PX4 is not intended to be a statement of preference. The author believes strongly in the importance of maintaining maximum compatibility across both projects.

# Acknowledgements

Rosetta Drone was brought to you by developers from Rogue Squadron, a UAS/C-UAS red team at the Defense Innovation Unit Experimental.

## Icons
Icons made by Pixel Perfect & Freepik at flaticon

# Licensing

Rosetta Drone is licensed under BSD3. For particularities related to U.S. federal government code release, please read Intent.MD. For more information, visit [code.mil](https://code.mil) or [code.gov](https://code.gov).

Rosetta Drone uses a modified version of DJI's [Android Video Stream Decoding Sample](https://developer.dji.com/mobile-sdk/documentation/sample-code/index.html), which is released under the MIT License.

Video RTP packing uses code modified from the [libstreamer](https://github.com/fyhertz/libstreaming) library, licensed under Apache 2.

rosettadrone

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

rosettadrone

파일 탐색기

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README