FreeNAS-Change-Logging

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

FreeNAS-Change-Logging

(★ 17)

Script to change logging location of FreeNAS systems

FreeNAS-Change-Logging Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

FreeNAS-Change-Logging README
==========

Overview
----------

This script allows you to change the location of the logging on an existing
FreeNAS system.  This is helpful if you want to enable persistent logging on
your server without having to setup a remote syslog server.

Typically, you will want to change the logging directory to somewhere on a
dataset.

Please note that running this script will change the way the restore factory
default function works.  However, if you run the --reset option of this script
then it will restore the original factory default filesystem.  Also, note that
the script makes a backup of the configuration files that it changes.

Boot messages will likely not appear in the messages log anymore, since the
persistent storage device is usually mounted toward the end of the boot
process.  To see these messages on a running system you can always run `dmesg`.

*Update*: The script no longer disables the daily emails set in
periodic.conf since FreeNAS 9.2 now has those turned off by default (see the
Release Notes: http://iso.cdn.freenas.org/9.2.0/RELEASE/ReleaseNotes).
If you are setting up an older FreeNAS version, use the script from an
older commit to have these disabled:
https://raw.github.com/jag3773/FreeNAS-Change-Logging/fe0b06fa2605ae302b2fc7223252ebdc8f00794f/FreeNAS-Change-Logging.sh.

Compatibility
----------

The script has been tested and found to be working on FreeNAS 8 and 9.

*Update*: As of FreeNAS 9.2 I believe that the .system dataset receives
logging by default.  Thus, the use of this script on 9.2+ is discouraged.

Files Modified
----------

The following files are modified by this script:

/conf/base/etc/newsyslog.conf
    /conf/base/etc/syslog.conf

Existing log files are also copied to the new log destination.

Usage
----------

Download the script and make it executable, you'll need to cd into a directory
that is writable:

cd /mnt/tank0
    fetch https://raw.github.com/jag3773/FreeNAS-Change-Logging/master/FreeNAS-Change-Logging.sh
    chmod +x FreeNAS-Change-Logging.sh

To change the location of the logging from /var/log (the default), run:

./FreeNAS-Change-Logging.sh -d <New_Log_Directory>

NOTE: The script will create the logging directory you pass to it if it does
not exist already.

Also, the script may take a while to run if you are booting off of a slow
device (some USB thumb drives are pretty slow).

To revert back to the factory default (/var/log), run:

./FreeNAS-Change-Logging.sh -r

If you change the logging to a custom location and later want to change it to
a different custom location, then you must reset the logging first.  As an
example:

./FreeNAS-Change-Logging.sh -d /mnt/tank0/oops
    ./FreeNAS-Change-Logging.sh -r
    ./FreeNAS-Change-Logging.sh -d /mnt/tank0/log

Note: Some logs may continue writing to the old location, even after a reset,
most notably, Nginx.  System process should start writing to the new location
right away.  If you need to have other services update their logging location
then you will need to restart those services or reboot the system.

FreeNAS-Change-Logging

FreeNAS-Change-Logging Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

FreeNAS-Change-Logging

FreeNAS-Change-Logging Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README