startproject_cc3200_ti-rtos

KO | EN

gitlite — search

#python #ai #go #golang #linux #macos #nodejs #windows #cli #kubernetes #awesome-list #vue #security #openai

startproject_cc3200_ti-rtos

(★ 20)

This is a starter project for the Texas Instruments CC3200 LaunchPad using TI-RTOS

startproject_cc3200_ti-rtos Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Example Introduction
--------------------
This example project provides a starting point for using the "full" TI-RTOS 
implementation with the CC3200 LaunchPad. This is different to the TI-RTOS 
implementation included in the CC3200 SDK examples. As this TI-RTOS 
implementation, not only includes SYS/BIOS components of TI-RTOS, but also 
includes the peripheral drivers that are supplied with TI-RTOS.

This has the advantage of making the project more self contained and easier to
distribute. It also makes for porting to other TI-RTOS supported MCUs and 
Processors much easier, including later incarnations of the CC3200. Hence
your code will be simplier to upgrade, when that time comes.

Example Summary
---------------

The project controls the LEDs on the CC3200 LaunchPad depending on UDP Packet 
received. See details on how to use below.

The program loads the startproject Task statically. This can be changed via the
cfg script tab of the startproject.cfg

SimpleLink Library
-------------------

There is a library included (simplelinklibrary.c) which contains many useful functions 
that are required when developing applications with the CC3200. These include mDNS, 
device names, MAC address, date and time and more.

The startproject contains examples for most of the library functions, these can be removed
if not needed.

Step For Cloning Repository
---------------------------

If you wish to contribute to the development of this example, please view the detailed
step at the following link to see how you can clone this repository to be used with 
Code Composure Studio.

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/407947/1453775#1453775

Setup Steps
-----------

You will need to have Code Composure Studio (CCS) v6 or later installed and 
TI-RTOS for SimpleLink will also need to be installed. This can be done via 
App Center, which can be accessed from within CCS via the View menu (CCS App
Center)

It is assumed that you have the CC3200 SDK installed in the default location on
the c: drive. The version that is used is CC3200SDK_1.0.0. if you are using a
later version of the SDK, then you will need to update references to the project.

If you have difficulties, you can find additional details on setting up the 
project to work with TI-RTOS at this webpage:
http://processors.wiki.ti.com/index.php/TI-RTOS_CC3200Wireless

Peripherals Exercised
---------------------
* Board_LED0 - CC3200_LP_LED_D7 - Red LED
* Board_LED1 - CC3200_LP_LED_D6 - Orange LED
* Board_LED2 - CC3200_LP_LED_D5 - Green LED

* Board_BUTTON1 - CC3200_LP_SW3 - Button SW3

* WIFI - Wi-Fi is used in this example

Example Usage
-------------
Run the example. All the 3 LEDS (Green, Orange and Red will turn on) to indicate
that the program has entered main.

You can connect to the Wi-Fi network using either Station or Access Point modes.
By default, it is set up to use SmartConfig in Station Mode (you will need to 
download the SimpleLink App from Apple App Store or Google Play). If you wish you
can also set it up in Access Point mode, by holding down Button (SW3) when starting
the LaunchPad (or you can edit the code appropriately)

Green light is on when in Station Mode (unless you altered code)
Green light is off when in AccessPoint Mode (unless you altered code)

Once connected to the network, you can now toggle LEDs by sending UDP packets to 
the CC3200 LaunchPad on port 4000

Control LED by Sending UDP Packet
--------------------------------

The following HEX data sent on UDP port 4000 will control the specific LED.

* Send FF00 to turn Red light off
* Send FF11 to turn Red light on

* Send EE00 to turn Orange light off
* Send EE11 to turn Orange light on

Tool To Use To Send UDP Packets
-------------------------------

There are many tools available to send UDP packets. An easy one that I have 
used successfully and is free is the UDP Test Tool from SCT - 
https://www.simplecomtools.com/productcart/pc/viewPrd.asp?idproduct=6&

There are many UDP packet senders for every platform available.

Control LEDs by Using Apple iOS App
-----------------------------------

If you wish, you can use the iOS app provided on this Github account to control the LEDs. 
The App will send the UDP packets and it provides a starting point for communicating with the 
CC3200 via an iOS App. The repository name is startproject_ios - https://github.com/remixed123/startproject_ios

startproject_cc3200_ti-rtos

startproject_cc3200_ti-rtos Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

startproject_cc3200_ti-rtos

startproject_cc3200_ti-rtos Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README