rogauracore - GitLite

KO | EN

gitlite — search

#react #golang #go #android #machine-learning #rust #docker #nodejs #macos #awesome #vue #awesome-list #security #openai

rogauracore

(★ 775)

RGB keyboard control for Asus ROG laptops

파일 탐색기

최종 버전 다운로드 (.zip)

- 90-rogauracore.rules
- README.md
- rogauracore.py
- rogauracore.c
.gitignore
configure.ac
LICENSE.md
Makefile.am
README.md

# 설치 가이드

1. 코드 내려받기

git clone https://github.com/wroberts/rogauracore

깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.

cd rogauracore

방금 내려받은 프로젝트 폴더 안으로 이동합니다.

2. 공식 설치 스크립트

쉬움 추천

사전 준비물

APT (Debian/Ubuntu 계열) Debian/Ubuntu 계열 리눅스에 기본 내장된 패키지 매니저입니다.

sudo apt install libusb-1.0-0 libusb-1.0-0-dev

APT 패키지 저장소에서 바로 설치합니다 (Debian/Ubuntu 계열).

sudo apt install build-essential autoconf git

APT 패키지 저장소에서 바로 설치합니다 (Debian/Ubuntu 계열).

✅ 설치 후 새 터미널을 열고, 프로그램의 버전 확인 명령(예: --version)으로 정상 설치됐는지 확인하세요.

이 레포의 README에 적힌 실제 명령어를 그대로 가져왔습니다.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# rogauracore - RGB keyboard control for Asus ROG laptops

(c) 2019 Will Roberts

Linux-compatible open-source libusb implementation similar to the ROG
Aura Core software.  Supports RGB keyboards with IDs
[0b05:1854](https://linux-hardware.org/index.php?id=usb:0b05-1854)
(GL553, GL753),
[0b05:1869](https://linux-hardware.org/index.php?id=usb:0b05-1869)
(GL503, FX503, GL703), [0b05:1866](https://linux-hardware.org/index.php?id=usb:0b05-1866) (GL504, GL533, GL703, GX501, GM501), [0b05:19b6](https://linux-hardware.org/index.php?id=usb:0b05-19b6) (GA503)
and [0b05:1a30](https://linux-hardware.org/index.php?id=usb:0b05-1a30) (GZ302EA).

## Usage

```
Usage:
   rogauracore COMMAND ARGUMENTS

COMMAND should be one of:
   single_static
   single_breathing
   single_colorcycle
   multi_static
   multi_breathing
   rainbow_cycle
   red
   green
   blue
   yellow
   gold
   cyan
   magenta
   white
   black
   rainbow
   brightness
   initialize_keyboard
```

In typical use, you will need root privileges to directly communicate
with the laptop's keyboard.  This is easy to do with `sudo`.  Try some
of these commands and see what works for you:

```sh
sudo rogauracore single_static 0000ff
sudo rogauracore single_static 00ff00
sudo rogauracore single_static ffff00
sudo rogauracore multi_static ff0000 ffff00 00ff00 00ffff
sudo rogauracore single_colorcycle 1
```

If your keyboard does not respond to `rogauracore`, it may help to
send an initialisation message to the keyboard to "wake it up":

```sh
sudo rogauracore initialize_keyboard
```

If your keyboard remains dark, its brightness might have defaulted to 0. Try:

```sh
sudo rogauracore brightness 3
```

## Installation

### Ubuntu

In all cases you will need `libusb` and `libusb-dev` installed:
```sh
sudo apt install libusb-1.0-0 libusb-1.0-0-dev
```
Optionally you might also need build tools:
```sh
sudo apt install build-essential autoconf git
```

Retrieve the `rogauracore` package, either through `curl` or `git`:
```sh
VERSION=1.6
curl -LOs https://github.com/wroberts/rogauracore/releases/download/$VERSION/rogauracore-$VERSION.tar.gz
tar xf rogauracore-$VERSION.tar.gz
cd rogauracore-$VERSION/
```
or
```sh
git clone https://github.com/wroberts/rogauracore.git
cd rogauracore
autoreconf -i
```

Then configure, make and install:
```sh
./configure
make
sudo make install
```

## Tips and tricks

On some machines, running `rogauracore` can cause the system's power
management to not be able to find the keyboard backlight control.
This manifests as unresponsive UI controls for brightening and
darkening the keyboard backlight.  If this issue affects you,
[@willlovesbearz](https://github.com/willlovesbearz) suggests running
this command after `rogauracore`:

```sh
sudo systemctl restart upower.service
```

## Related projects

- [rogauracore-gui](https://github.com/rastafaninplakeibol/rogauracore-gui)
  is an Electron-based GUI for `rogauracore` by
  [@rastafaninplakeibol](https://github.com/rastafaninplakeibol).

- [rog-auracore-gui](https://gitlab.com/bytecode-solutions/community/rog-auracore-gui)
  is a native GTK3 GUI for `rogauracore` by
  [@alek.cora.glez](https://gitlab.com/alek.cora.glez), installable via
  [PPA](https://launchpad.net/~alek.cora.glez/+archive/ubuntu/rog-auracore-gui).

- [OpenRGB](https://gitlab.com/CalcProgrammer1/OpenRGB) can probably
  do all the things that `rogauracore` can do.