Fogg

KO | EN

gitlite — search

#javascript #ai #go #golang #android #rust #deep-learning #macos #nodejs #awesome #kubernetes #vue #security #open-source

(★ 8)

PowerShell tool to aide and simplify the creation, deployment and provisioning of infrastructure in Azure

Fogg 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Fogg

[![MIT licensed](https://img.shields.io/badge/license-MIT-blue.svg)](https://raw.githubusercontent.com/Badgerati/Fogg/master/LICENSE.txt)

[![Chocolatey](https://img.shields.io/chocolatey/v/fogg.svg?colorB=a1301c)](https://chocolatey.org/packages/fogg)
[![Chocolatey](https://img.shields.io/chocolatey/dt/fogg.svg?label=downloads&colorB=a1301c)](https://chocolatey.org/packages/fogg)

Fogg is a PowerShell tool to simplify the creation, deployment and provisioning of infrastructure (IaaS) in Azure using Azure Resource Manager (does not support Classic).

## Installing

[Fogg](https://chocolatey.org/packages/fogg) can be installed via Chocolatey:

```bash
choco install fogg
```

## Requirements

* PowerShell v4.0+
* AzureRM module v5.3+ (installed via PowerShellGet: `Install-Module AzureRM`)

## Features

* Deploy and provision Virtual Machines in Azure using Resource Manager
* Supports unmanaged and managed disks
* Ability to spin-up VMs using existing Images or VHDs
* Spin-up multiple Resource Groups at once using a Foggfile
* Has inbuilt provisioning scripts, with more that can be added on request
* Inbuilt firewall ports for quicker allow/deny of in/outbound rules
* Provision using:
  * PowerShell Desired State Configuration (DSC)
  * Custom Scripts (ps1/bat)
  * Chocolatey to install software
* Deploy:
  * Resource Groups
  * Storage Accounts
  * Virtual Networks
  * Subnets
  * Network Security Groups with firewall rules
  * Availability Sets and Load Balancers
  * Public IP addresses for your VMs/Load Balancers
  * VPN Gateways for site-to-site and point-to-site connections
* Immediate feedback if your template is about to exceed the core limit in a location
* Returns an object containing the information of what was deployed
* Ability to append new VMs rather than always creating and updating the same ones
* Add additional data drives to VMs and add them as new partitions
* Add tags onto all resources

## Description

Fogg is a PowerShell tool to simplify the creation, deployment and provisioning of infrastructure (IaaS) in Azure.

Fogg uses a JSON template file to determine what needs to be created and deployed (but don't worry, the JSON file is far, far smaller than Azure's ARM template files!). Furthermore, Fogg also accepts a few parameters for things like `Resource Group Name`, `Subscription Name`, `VM Credentials` and others. While these are to be passed in via command line, I'd recommend using a `Foggfile` to version control your deployments (more later).

## Example

> For more examples, please see the `examples` folder in the repo (a more advanced example can be found in the wiki)

This simple example will just spin-up one VM. The first thing you will need is a template file, which will look as follows:

```json
{
    "template": [
        {
            "type": "vm",
            "role": "test",
            "count": 1,
            "os": {
                "type": "Windows",
                "size": "Standard_DS1_v2",
                "publisher": "MicrosoftWindowsServer",
                "offer": "WindowsServer",
                "skus": "2016-Datacenter"
            },
            "publicIp": true
        }
    ]
}
```

The above template will be used by Fogg to deploy one public Windows 2016 VM. You will notice the `count` value, changing this to 2, 3 or more will deploy 2, 3 or more of this VM type. If you don't supply the `count` value then just 1 VM will be deployed

> Note: if you deploy a VM type with a `count > 1`, Fogg will automatically load balance your VMs for you, this can be disabled via: `"loadBalancer": false`, though you will still get an availability set

The `role` and `type` values for template objects are mandatory. the `role` can be any unique alphanumeric string, and the `type` value can only be one of either `vm`, `vpn`, `vnet` or `sa`.

> Note, try and keep the `role` value short for Azure naming restrictions - roles like web, file, or data are good

To use Fogg and the template file above, you will need an Azure Subscription. In general, the call to Fogg would look as follows:

```powershell
fogg -sub "AzureSubName" -rg "basic-rg" -loc "westeurope" -vnetaddr "10.1.0.0/16" -snets @{"vm"="10.1.0.0/24"} -tp "<path_to_above_template>"
```

This will tell Fogg to use the above template against your Subscription in Azure. Fogg will then:

* Validate the template file
* Request for you Azure Subscription credentials (though you can pass these on the cli)
* Request for administrator credentials to deploy the VMs (again, can be supplied on the cli)
* Create a Resource Group called `basic-rg` in Location `westeurope`
* Create a Storage Account called `euwbasicgblsa` (or `eu-w-basic-gbl-sa` for for the globally used storage account for Fogg)
* Create a Virtual Network called `basic-vnet` for address `10.1.0.0/16`
* Create a Subnet under the Virtual Network called `test-snet` for address `10.1.0.0/24`
* Create a Network Security Group called `test-nsg`
* Create an Availability Set called `test-as`
* A Virtual Machine called `test-vm1` will then be deployed under the `test-snet` Subnet

To create a Foggfile of the above, stored at the root of the repo (can be else where as a `-FoggfilePath` can be supplied on cli), would look like the following:

```json
{
    "Groups": [
        {
            "ResourceGroupName": "basic-rg",
            "Location": "westeurope",
            "TemplatePath": "<path_to_above_template>",
            "VNetAddress": "10.1.0.0/16",
            "SubnetAddresses": {
                "test": "10.1.0.0/24"
            }
        }
    ]
}
```

Note that the above leaves out the `SubscriptionName`, this is because the Foggfile at the root of a repo will mostly be used by your devs/QAs/etc. to spin-up the infrastructure in their MSDN Azure subscriptions. If the subscription name is the same for all, then you could add in the `"SubscriptionName": "<name>"` to the Foggfile (as a part of the main JSON object, not within the Groups objects); if left out Fogg will request it when called.

Also note that if the path used for the `TemplatePath` is relative, it must be relative to the Foggfile's location.

If you are using a Foggfile at the root, then the call to use Fogg would simply be:

```powershell
fogg
```

If you pass in the parameters on the cli while using a Foggfile, the parameters from the cli have higher precedence and will override the Foggfile's values. (ie: passing `-SubscriptionName` will override the `"SubscriptionName"` in the Foggfile)

On a successful deployment, Fogg will return a resultant object that contains the information of the infrastructure that was just deployed.
This will contain the names of resources like the VNETs, Subnets and VMs; to the IPs of them, and Ports of Load Balancer. For the above example:

```powershell
'basic-rg' = @{
    'Location' = 'westeurope';
    'VirtualNetwork' = @{
        'Name' = 'basic-vnet';
        'ResourceGroupName' = 'basic-rg';
        'Address' = '10.1.0.0/16';
    };
    'StorageAccount' = @{
        'Name' = 'euwbasicgblsa'
    };
    'VirtualMachineInfo' = @{
        'test' = @{
            'Subnet' = @{ 
                'Name' = 'test-snet';
                'Address' = '10.1.0.0/24';
            };
            'AvailabilitySet' = 'test-as';
            'LoadBalancer' = @{};
            'VirtualMachines' = @(
                @{
                    'Name' = 'test-vm1';
                    'PrivateIP' = '10.1.0.1';
                    'PublicIP' = '52.139.128.96';
                };
            );
        };
    };
    'VPNInfo' = @{};
    'VirtualNetworkInfo' = @{};
}
```

## TODO

* SQL always-on clusters
* Web Apps?
* Possibility of Chef as a provisioner
* Documentation

## Bugs and Feature Requests

For any bugs you may find or features you wish to request, please create an [issue](https://github.com/Badgerati/Fogg/issues "Issues") in GitHub.

Fogg

Fogg 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Fogg

Fogg 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README