KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #developer-tools #react #windows #deepseek-harness #ai-agent

OctoPrint-LEDStripControl

★ 66 Open GitHub ↗

OctoPrint plugin that intercepts M150 GCode commands and controls local GPIOs connected to LEDs.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# OctoPrint-LEDStripControl

OctoPrint Plugin that intercepts M150 GCode commands and controls local GPIOs accordingly.

Implements the M150 command syntax from the latest Marlin.

M150: Set Status LED Color - Use R-U-B for R-G-B Optional (W)
        M150 R255       ; Turn LED red
        M150 R255 U127  ; Turn LED orange (PWM only)
        M150            ; Turn LED off
        M150 R U B      ; Turn LED white
        M150 W          ; Turn LED white if using RGBW strips (optional)

## Setup

1. Make sure that the OctoPrint user is in the gpio group via the following command.

usermod -a -G gpio pi

1. Install via the bundled [Plugin Manager](https://github.com/foosel/OctoPrint/wiki/Plugin:-Plugin-Manager)
or manually using this URL:

https://github.com/google/OctoPrint-LEDStripControl/archive/master.zip

1. Restart OctoPrint

## Configuration

**NOTE: GPIO pins should be specified as physical number and not BCM number.**

Configure the GPIO pins via the OctoPrint settings UI.

## Disclaimer

This is **not** an official Google product.

OctoPrint-LEDStripControl

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README