Wemos-D1-ESP8266-PIR-Alarm

KO | EN

gitlite — search

#typescript #ai-agents #ai #dsh-plugin #deepseek-harness #open-source #claude-code #codex #cli #developer-tools #react #windows

Wemos-D1-ESP8266-PIR-Alarm

★ 78 Open GitHub ↗

Simple Web Alerting Motion Alarm using Espressif ESP8266 and IFTTT

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Erics Super Simple motion sensor alarm system using a Wemos D1 mini and Passive infra-red (PIR) sensor to send you notifications via IFTTT

🐦 <a href="https://twitter.com/mkmeorg">Twitter</a>
| 📺 <a href="https://www.youtube.com/mkmeorg">YouTube</a>
| 🌍 <a href="http://www.mkme.org">mkme.org</a> 
Support this project and become a patron on <a href="http://mkme.org/patreon">Eric's Patreon</a>. 
Website, Forum and store are at http://mkme.org 
Chat with Me: <a href="https://discord.gg/j9S4Fgv">Discord</a>

Buy a components kit from my website here: https://store.mkme.org/?product=esp8266-pir-motion-detector-kit

Or buy them yourself:

Buy the Wemos D1 Here: http://amzn.to/2lFkeA6

Buy the PIR sensor here: http://amzn.to/2lFYh3J
 
If you use this code or personalize it etc- please consider sharing it back with the world Open-Source 
Tested with Arduino IDE 1.6.7

Connect PIR sensor V+ to 5V , V- to GND and Signal as per the sketch below.

See the full video here: https://www.youtube.com/watch?v=y9XC5yHR5Bk

Buy the Wemos D1 Here: http://amzn.to/2lFkeA6

Buy the PIR sensor here: http://amzn.to/2lFYh3J
 
V1 Basic Sketch Works to send emails every 10 seconds or around there.
V2 works smoke and motion
V3 Wont boot if d8 high on startup- Changed to Pin 7 and this works. Levelconverter in place and tested- works perfect for 5V in
   Note: MQ2 draws too much for board to support and will need standalone Vref
V4 Converted to IFTTT and temporarily removed smoke detection. Disabled wificlient in setup and only activate when ifttt is called

Get a 3D printable case on Thingiverse here: https://www.thingiverse.com/thing:2489968

To get your IFTTT Key:
1: sign in 
2: click on your account in the top right corner 
3: select services 
4: select Webhooks 
5: click settings in the top right 
6: under account info, copy everything after https://maker.ifttt.com/use/   (including underscores)

Wemos-D1-ESP8266-PIR-Alarm

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README