ArbitraryWaveformGenerator

KO | EN

gitlite — search

#ai #typescript #golang #android #machine-learning #rust #java #windows #kubernetes #awesome-list #vue #security #mcp #open-source

ArbitraryWaveformGenerator

(★ 9)

AWG with Raspi Pico for audio purposes

ArbitraryWaveformGenerator 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Arbitrary Waveform Generator
Simple sine / triangle /rect / sawtooth / arbitrary (formula defined) generator with Raspi Pico ca. 1Hz ...30kHz

![Picture](https://raw.githubusercontent.com/jean-claudeF/ArbitraryWaveformGenerator/main/awg_04.png)

This started as an educational project (me learning about PIO and DMA) and ended as a quite usable AWG generator that is computer controlled.
A document describing my efforts is found here:

https://staff.ltam.lu/feljc/electronics/uPython/PIO_DDS.pdf

There is a small PC software now to control the generator:

https://github.com/jean-claudeF/ArbitraryWaveformGenerator/blob/main/awg_v.mp4

Again I find the small Pico programmed in Micropython is a very useful piece of hardware.
It has some big advantages over Arduino, for example:
- one controller can have more programs on it that can easily be exchanged or edited
- functions can be called from the exterior, via UART terminal or via Picoconnect

## Micropython

MODES:
modes = ["sine", "saw", "triangle", "rect", "demo", "abssine", "awg","awg_new", "awg_last"]

For the mode "awg" the Pico must have a file awgvalues.py that defines the curve in Python format
like this:

``` python
function = 'sin(2*pi*x) + cos(3*pi*x)'
N = 4096
values = [231, 231, 231, 231, 232, 232, 232, ...]
```

There is a Python software for the PC to easily generate and transfer this.

For an explanation of the fundamental algorithm see here:

https://staff.ltam.lu/feljc/electronics/uPython/PIO_DDS.pdf

### Some explanations to the code

#### Modes sine, saw, triangle, rect

The waveform is calculated and the buffer filled with the calculated values.

N is the number of samples

#### awg modes

- the modes awg, awg_new and awg_last essentially do the same, the different names are for compatibility with the PC software only

- For awg() and awg_new(), data are imported in Python format.
This is elegant, but leads to failure if the import is done more than once.
To avoid this, the module awgvalues is deleted if it was already in memory.

``` python
def awg():
    global N, buffer
    try:
        del sys.modules['awgvalues']
    except:
        print("Importing awgvalues.py")
        
    import awgvalues as a
    set_N(a.N)
    values = a.values
    print(a.function)
   
    for i in range(0, N):
        buffer[i] = values[i]
```

#### Setting modes and frequency via terminal

When awg_05.py is started, a loop that asks for frequency or mode is started.

Thus the generator can be simply controlled via serial terminal.

``` python
def mainloop():
    sine()
    start(440)
    
    while(True):
        f = ask_f_and_mode()
        if not f:
            stop()
            break
        start(f) 
    stop()
```

The function ask_f_and_mode is used to input frequency or mode, or stop on empty input:

``` python
def ask_f_and_mode():
    modes = ["sine", "saw", "triangle", "rect", "demo", "abssine", "awg","awg_new", "awg_last"]
    f = FREQUENCY
    print("Input f/Hz or mode")
    print("Modes: ", modes)
    print("Empty to stop")
    s = input("f/Hz or mode: ")
    if not s:
        f = 0
        stop()
    elif s.isdigit():
        f = float(s)
    else:
        if s in modes:
            exec(s + "()")
    
    return f
```

## tk_awg_xx

![Picture](https://raw.githubusercontent.com/jean-claudeF/ArbitraryWaveformGenerator/main/tk_awg_05.png)

The software tk_awg_xx allows you to control the AWG  from the PC.

- buttons SINE, RECT, ... and text field frequency set the curve form and the frequency ()

- AWGDEMO shows a predefined signal.

- AWGNEW calls a formulaplotter with which you can define a curve by entering a formula.

- AWGLAST sets the curve defined before with the formula plotter.

- On the right side the frequency can be set up and down in musical intervals

## Formula plotter
The formula plotter allows you to enter a formula, see the graph (normalised to one period and byte values 0...255) as needed by the AWG.

![Picture](https://raw.githubusercontent.com/jean-claudeF/ArbitraryWaveformGenerator/main/formula_plotter.png)

Let's first have a look at some utility functions:

``` python
def calculate_y(x, n, function):
    y = empty(n, dtype=float)
    s = f"y[:] = {function}"
    exec(s)
    return y

def normalize(y):
    maxy = max(max(y), abs(min(y)))
    return y / maxy

def normalize_to_bytes(y):
    return ((y * 127) + 127).astype(int)

def calc_xy(n, function):
    x = linspace(0.0, 1.0, n)
    y = calculate_y(x, n, function)
    return x, y
    
def calc_awg(n, function):
    # returns py string s 
    # contains function = ..., N=... and y=[....] (byte values), 
    # and x, y values
    x, y = calc_xy(n, function)
    y1 = normalize(y)
    yb = normalize_to_bytes(y1)
    yv = array(yb, dtype = uint8)
    yv = yv.tolist()
    x = x.tolist()
    s = "function = '" + function + "'\n"
    s += "N = " + str(n) + "\nvalues = " + str(yv)

return s, x, yv    
```
The main function is calc_awg(n, function).
This calculates a list of x and a list of y values for a given function, and returns a string s that can be used to write an awgvalues.py file.
The x range is fixed to 0...1, corresponding to 1 period.
There are some parts of these functions that were a little tricky (for me!) and cost me some time to get ready.
Here they are:
- In calculate_y we first create an empty numpy array of type float. This can then be used in an exec statement to put in the y values.
The trick here is to use y[:] = instead of simply putting  y = ...
- In calc_awg, The y values are first converted to integer (byte) values uint8. Then this numpy array is converted to a list. And this list is used in the string s, so it can be written to the awgvalues.py file.

The rest is defining a toplevel window in tkinter. We must define a callback function to transfer the values to the calling program.
The formula can then be started from the main program tk_awg_xx like this:

```python
 def open_plotter(self):
        self.withdraw()
        fp = FormulaPlotter(self, on_plot_callback=handle_plot_data, n = 4096)

def handle_plot_data( x, y, function):
    print("Received plot data from FormulaPlotter.")
    #...
    s = "function = '" + function + "'"
    s += "\nN = " + str(N)
    s += "\nvalues = " + str(y) + '\n'
    mypico.write_big_file(AWGFILE, s,1000)
    set_N()
    set_mode("awg_new()")
```

ArbitraryWaveformGenerator

ArbitraryWaveformGenerator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ArbitraryWaveformGenerator

ArbitraryWaveformGenerator 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README