nighthawk

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

★ 412 Open GitHub ↗

L7 (HTTP/HTTPS/HTTP2/HTTP3) performance characterization tool

다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Nighthawk

*A L7 (HTTP/HTTPS/HTTP2) performance characterization tool*

[![OpenSSF Scorecard](https://api.securityscorecards.dev/projects/github.com/envoyproxy/nighthawk/badge)](https://securityscorecards.dev/viewer/?uri=github.com/envoyproxy/nighthawk)

## Current state

Nighthawk currently offers:

- A load testing client which supports HTTP/1.1 and HTTP/2 over HTTP and HTTPS.
(HTTPS certificates are not yet validated).
- A simple [test server](source/server/README.md) which is capable of generating dynamic response sizes, as well as inject delays.
- A binary to transform nighthawk output to well-known formats, allowing integration with other systems and dashboards.

## Navigating the codebase

See [navigating the codebase](docs/root/navigating_the_codebase.md) for a
description of the directory structure.

## Additional Documentation

See the [howto](docs/root/howto) directory for documentation aimed at specific
use-cases.

## Building Nighthawk

### Prerequisites

Note that Nighthawk uses [Envoy's code](https://github.com/envoyproxy/envoy)
directly, so building Envoy is a prerequisite for building Nighthawk. Start by
looking at [Envoy's
building](https://www.envoyproxy.io/docs/envoy/latest/start/building.html)
documentation.

#### Compiler requirements

The main supported way of building Nighthawk is with the Clang compiler. At
least Clang/LLVM 12+ is needed to successfully build Nighthawk.

#### Bazel

Both Envoy and Nighthawk use the [Bazel](https://bazel.build/) build tool. The
steps required to set up Bazel are documented in Envoy's [Quick start Bazel
build for
developers](https://github.com/envoyproxy/envoy/blob/main/bazel/README.md#quick-start-bazel-build-for-developers).

### Building on Ubuntu

This section outlines the steps needed to build on Ubuntu. Note that these steps
include commands that are documented in the prerequisites section above.

#### Install required packages

Run the following command to install the required packages.
```
sudo apt-get install \
   autoconf \
   automake \
   cmake \
   curl \
   libtool \
   make \
   ninja-build \
   patch \
   python3-pip \
   unzip \
   virtualenv
```

#### Install Clang/LLVM

Note that depending on the chosen Ubuntu version, you may need to manually
install a never version of Clang/LLVM. The installed version of Clang can be
verified by running:
```
clang -v
```

If you do need to install a newer version, be sure to use Ubuntu's
`update-alternatives` or a similar approach to switch to using the newer
Clang/LLVM. See [issue#832](https://github.com/envoyproxy/nighthawk/issues/832)
for one possible approach.

Run the following commands to install Clang/LLVM.
```
sudo apt install -y lld clang llvm lld lldb
sudo apt install -y clang-{format,tidy,tools} clang-doc clang-examples
```

#### Install Bazelisk instead of bazel

[Bazelisk](https://github.com/bazelbuild/bazelisk) is recommended, since it
automatically chooses and downloads the appropriate Bazel version. If you
already have Bazel installed, it is strongly recommended to remove it.

Run the following to remove bazel.
```
sudo apt-get remove bazel
```

Run the following to install Bazelisk.
```
sudo wget -O /usr/local/bin/bazel https://github.com/bazelbuild/bazelisk/releases/latest/download/bazelisk-linux-$([ $(uname -m) = "aarch64" ] && echo "arm64" || echo "amd64")
sudo chmod +x /usr/local/bin/bazel
```

#### Clone Nighthawk and setup Clang as the compiler

Run the following to clone the Nighthawk repository and instruct Bazel to use
Clang.
```
git clone https://github.com/envoyproxy/nighthawk
cd nighthawk/
echo "build --config=clang" >> user.bazelrc
```

#### Install Python libraries

It is advisable to use the same version of Python as the one listed at the top of `tools/base/requirements.txt`. While other versions may also work, the chances of success are greatest if using the same one.

Recommended: Use `virtualenv` to avoid conflicts between Nighthawk's Python package version requirements and other versions already on your system:
```
python3 -m venv ~/my_nh_venv
source ~/my_nh_venv/bin/activate
```

Note: Avoid creating the environment under the Nighthawk project directory.

Install Python packages required for Nighthawk (whether using `virtualenv` or not):
```
pip3 install --user -r tools/base/requirements.txt
```

If `pip3 install` fails, you will need to troubleshoot the Python environment before attempting to build and test Nighthawk.

#### Build and testing  Nighthawk

You can now use the CI script to build Nighthawk.
```
ci/do_ci.sh build
```

Or to execute its tests.
```
ci/do_ci.sh test
```

Note that after building completes, the Nighthawk binaries are located in the
`bazel-bin/` directory located at the root of the cloned Nighthawk repository.

## Using the Nighthawk client CLI

For using the Nighthawk test server, see [here](source/server/README.md).

```bash
➜ bazel-bin/nighthawk_client --help
```

```

USAGE:

bazel-bin/nighthawk_client  [--user-defined-plugin-config <string>] ...
[--latency-response-header-name <string>]
[--stats-flush-interval-duration <duration>]
[--stats-flush-interval <uint32_t>]
[--stats-sinks <string>] ... [--no-duration]
[--simple-warmup]
[--rate-limiter-plugin-config <string>]
[--request-source-plugin-config <string>]
[--request-source <uri format>] [--label
<string>] ... [--multi-target-use-https]
[--multi-target-path <string>]
[--multi-target-endpoint <string>] ...
[--experimental-h2-use-multiple-connections]
[--nighthawk-service <uri format>]
[--jitter-uniform <duration>] [--open-loop]
[--experimental-h1-connection-reuse-strategy
<mru|lru>] [--no-default-failure-predicates]
[--failure-predicate <string:uint64_t>] ...
[--termination-predicate <string:uint64_t>]
... [--trace <uri format>]
[--sequencer-idle-strategy <spin|poll
|sleep>] [--max-concurrent-streams
<uint32_t>] [--max-requests-per-connection
<uint32_t>] [--max-active-requests
<uint32_t>] [--max-pending-requests
<uint32_t>] [--transport-socket <string>]
[--upstream-bind-config <string>]
[--tls-context <string>]
[--request-body-size <uint32_t>]
[--request-header <string>] ...
[--request-method <GET|HEAD|POST|PUT|DELETE
|CONNECT|OPTIONS|TRACE>] [--address-family
<auto|v4|v6>] [--burst-size <uint32_t>]
[--prefetch-connections] [--output-format
<json|human|yaml|dotted|fortio
|experimental_fortio_pedantic|csv
|prometheus>] [-v <trace|debug|info|warn
|error|critical>] [--concurrency <string>]
[--tunnel-tls-context <string>]
[--tunnel-uri <string>] [--tunnel-protocol
<http1|http2|http3>]
[--http3-protocol-options <string>] [-p
<http1|http2|http3>] [--h2] [--timeout
<uint32_t>] [--duration <uint32_t>]
[--connections <uint32_t>] [--rps
<uint32_t>] [--] [--version] [-h] <uri
format>

Where:

--user-defined-plugin-config <string>  (accepted multiple times)
WIP - will throw unimplemented error. Optional configurations for
plugins that collect data about responses received by NH and attach a
corresponding UserDefinedOutput to the Result. Example (json):
{name:"nighthawk.fake_user_defined_output"
,typed_config:{"@type":"type.googleapis.com/nighthawk.FakeUserDefinedO
utputConfig",fail_data:"false"}}

--latency-response-header-name <string>
Set an optional header name that will be returned in responses, whose
values will be tracked in a latency histogram if set. Can be used in
tandem with the test server's response option
"emit_previous_request_delta_in_response_header" to record elapsed
time between request arrivals. Default: ""

--stats-flush-interval-duration <duration>
Time interval (in Duration) between flushes to configured stats sinks.
For example '1s' or '1.000000001s'. Mutually exclusive with
--stats-flush-interval.

--stats-flush-interval <uint32_t>
Time interval (in seconds) between flushes to configured stats sinks.
Mutually exclusive with --stats-flush-interval-duration. Default: 5.

--stats-sinks <string>  (accepted multiple times)
Stats sinks (in json) where Nighthawk metrics will be flushed. This
argument is intended to be specified multiple times. Example (json):
{name:"envoy.stat_sinks.statsd"
,typed_config:{"@type":"type.googleapis.com/envoy.config.metrics.v3.St
atsdSink",tcp_cluster_name:"statsd"}}

--no-duration
Request infinite execution. Note that the default failure predicates
will still be added. Mutually exclusive with --duration.

--simple-warmup
Perform a simple single warmup request (per worker) before starting
execution. Note that this will be reflected in the counters that
Nighthawk writes to the output. Default is false.

--rate-limiter-plugin-config <string>
Rate Limiter plugin configuration in json. Mutually exclusive with
--burst-size and --jitter-uniform. Possible configurations located in
api/rate_limiter. Example (json):
{name:"nighthawk.linear-ramping-rate-limiter-plugin"
,typed_config:{"@type":"type.googleapis.com/nighthawk.rate_limiter.Lin
earRampingRateLimiterConfig","ramp_time":"5.5s"}}

--request-source-plugin-config <string>
[Request
Source](https://github.com/envoyproxy/nighthawk/blob/main/docs/root/ov
erview.md#requestsource) plugin configuration in json. Mutually
exclusive with --request-source. Example (json):
{name:"nighthawk.stub-request-source-plugin"
,typed_config:{"@type":"type.googleapis.com/nighthawk.request_source.S
tubPluginConfig",test_value:"3"}}

--request-source <uri format>
Remote gRPC source that will deliver to-be-replayed traffic. Each
worker will separately connect to this source. For example
grpc://127.0.0.1:8443/. Mutually exclusive with
--request_source_plugin_config.

--label <string>  (accepted multiple times)
Label. Allows specifying multiple labels which will be persisted in
structured output formats.

--multi-target-use-https
Use HTTPS to connect to the target endpoints. Otherwise HTTP is used.
Mutually exclusive with providing a URI.

--multi-target-path <string>
The single absolute path Nighthawk should request from each target
endpoint. Required when using --multi-target-endpoint. Mutually
exclusive with providing a URI.

--multi-target-endpoint <string>  (accepted multiple times)
Target endpoint in the form IPv4:port, [IPv6]:port, or DNS:port. This
argument is intended to be specified multiple times. Nighthawk will
spread traffic across all endpoints with round robin distribution.
Mutually exclusive with providing a URI.

--experimental-h2-use-multiple-connections
DO NOT USE: This option is deprecated, if this behavior is desired,
set --max-concurrent-streams to one instead.

--nighthawk-service <uri format>
Nighthawk service uri. Example: grpc://localhost:8843/. Default is
empty.

--jitter-uniform <duration>
Add uniformly distributed absolute request-release timing jitter. For
example, to add 10 us of jitter, specify .00001s. Default is empty /
no uniform jitter.

--open-loop
Enable open loop mode. When enabled, the benchmark client will not
provide backpressure when resource limits are hit.

--experimental-h1-connection-reuse-strategy <mru|lru>
Choose picking the most recently used, or least-recently-used
connections for re-use.(default: mru). WARNING: this option is
experimental and may be removed or changed in the future!

--no-default-failure-predicates
Disables the default failure predicates, indicating that Nighthawk
should continue sending load after observing error status codes and
connection errors.

--failure-predicate <string:uint64_t>  (accepted multiple times)
Failure predicate. Allows specifying a counter name plus threshold
value for failing execution. Defaults to not tolerating error status
codes and connection errors. Example: benchmark.http_5xx:4294967295.

--termination-predicate <string:uint64_t>  (accepted multiple times)
Termination predicate. Allows specifying a counter name plus threshold
value for terminating execution.

--trace <uri format>
Trace uri. Example: zipkin://localhost:9411/api/v2/spans. Default is
empty.

--sequencer-idle-strategy <spin|poll|sleep>
Choose between using a busy spin/yield loop or have the thread poll or
sleep while waiting for the next scheduled request (default: spin).

--max-concurrent-streams <uint32_t>
Max concurrent streams allowed on one HTTP/2 or HTTP/3 connection.
Does not apply to HTTP/1. (default: 2147483647).

--max-requests-per-connection <uint32_t>
Max requests per connection (default: 4294937295).

--max-active-requests <uint32_t>
The maximum allowed number of concurrently active requests. HTTP/2
only. (default: 100).

--max-pending-requests <uint32_t>
Max pending requests (default: 0, no client side queuing. Specifying
any other value will allow client-side queuing of requests).

--transport-socket <string>
Transport socket configuration in json. Mutually exclusive with
--tls-context. Example (json): {name:"envoy.transport_sockets.tls"
,typed_config:{"@type":"type.googleapis.com/envoy.extensions.transport
_sockets.tls.v3.UpstreamTlsContext"
,common_tls_context:{tls_params:{cipher_suites:["-ALL:ECDHE-RSA-AES128
-SHA"]}}}}

--upstream-bind-config <string>
BindConfig in json. If specified, this configuration is used to bind
newly established upstream connections. Allows selecting the source
address, port and socket options used when sending requests. Example
(json): {source_address:{address:"127.0.0.1",port_value:0}}

--tls-context <string>
DEPRECATED, use --transport-socket instead. TlS context configuration
in json. Mutually exclusive with --transport-socket. Example (json):
{common_tls_context:{tls_params:{cipher_suites:["-ALL:ECDHE-RSA-AES128
-SHA"]}}}

--request-body-size <uint32_t>
Size of the request body to send. NH will send a number of consecutive
'a' characters equal to the number specified here. (default: 0, no
data).

--request-header <string>  (accepted multiple times)
Raw request headers in the format of 'name: value' pairs. This
argument may specified multiple times.

--address-family <auto|v4|v6>
Network address family preference. Possible values: [auto, v4, v6].
The default output format is 'AUTO'.

--burst-size <uint32_t>
Release requests in bursts of the specified size (default: 0).

--prefetch-connections
Use proactive connection prefetching (HTTP/1 only).

--concurrency <string>
The number of concurrent event loops that should be used. Specify
'auto' to let Nighthawk leverage all vCPUs that have affinity to the
Nighthawk process. Note that increasing this results in an effective
load multiplier combined with the configured --rps and --connections
values. Default: 1.

--tunnel-tls-context <string>
Upstream TlS context configuration in json. Required to encapsulate in
HTTP3 Example (json):
{common_tls_context:{tls_params:{cipher_suites:["-ALL:ECDHE-RSA-AES128
-SHA"]}}}

--tunnel-uri <string>
The address of the proxy. Possible values: [http1, http2, http3]. The
default protocol is 'http1'

--tunnel-protocol <http1|http2|http3>
The protocol for setting up tunnel encapsulation. Possible values:
[http1, http2, http3]. The default protocol is 'http1' Combinations
not supported currently are protocol = HTTP3 and tunnel_protocol =
HTTP1. and protocol = HTTP3 and tunnel_protocol = HTTP3. When protocol
is set to HTTP3 and tunneling is enabled, the CONNECT-UDP method is
used Otherwise, the HTTP CONNECT method is used

--http3-protocol-options <string>
HTTP3 protocol options (envoy::config::core::v3::Http3ProtocolOptions)
in json. If specified, Nighthawk uses these HTTP3 protocol options
when sending requests. Only valid with --protocol http3. Mutually
exclusive with any other command line option that would modify the
http3 protocol options, e.g. --max-concurrent-streams. Example (json):
{quic_protocol_options:{max_concurrent_streams:1}}

-p <http1|http2|http3>,  --protocol <http1|http2|http3>
The protocol to encapsulate requests in. Possible values: [http1,
http2, http3]. The default protocol is 'http1' when neither of --h2 or
--protocol is used. Mutually exclusive with --h2.

--h2
DEPRECATED, use --protocol instead. Encapsulate requests in HTTP/2.
Mutually exclusive with --protocol. Requests are encapsulated in
HTTP/1 by default when neither of --h2 or --protocol is used.

--timeout <uint32_t>
Connection connect timeout period in seconds. Also used as the upper
bound on the time spent draining in-flight requests during shutdown.
Default: 30.

--duration <uint32_t>
The number of seconds that the test should run. Default: 5. Mutually
exclusive with --no-duration.

--connections <uint32_t>
The maximum allowed number of concurrent connections per event loop.
HTTP/1 only. Default: 100.

--rps <uint32_t>
The target requests-per-second rate. Default: 5.

--,  --ignore_rest
Ignores the rest of the labeled arguments following this flag.

--version
Displays version information and exits.

-h,  --help
Displays usage information and exits.

<uri format>
URI to benchmark. http:// and https:// are supported, but in case of
https no certificates are validated. Provide a URI when you need to
benchmark a single endpoint. For multiple endpoints, set
--multi-target-* instead.

L7 (HTTP/HTTPS/HTTP2) performance characterization tool.

```

### Nighthawk gRPC service

The gRPC service can be used to start a server which is able to perform back-to-back benchmark runs upon request. The service interface definition [can be found here.](https://github.com/envoyproxy/nighthawk/blob/59a37568783272a6438b5697277d4e56aa16ebbe/api/client/service.proto)

```bash
➜ bazel-bin/nighthawk_service --help
```

```

USAGE:

bazel-bin/nighthawk_service  [--service <traffic-generator-service
|dummy-request-source>]
[--listener-address-file <>] [--listen
<address:port>] [--] [--version] [-h]

Where:

--service <traffic-generator-service|dummy-request-source>
Specifies which service to run. Default 'traffic-generator-service'.

--listener-address-file <>
Location where the service will write the final address:port on which
the Nighthawk grpc service listens. Default empty.

--listen <address:port>
The address:port on which the Nighthawk gRPC service should listen.
Default: 0.0.0.0:8443.

--,  --ignore_rest
Ignores the rest of the labeled arguments following this flag.

--version
Displays version information and exits.

-h,  --help
Displays usage information and exits.

L7 (HTTP/HTTPS/HTTP2) performance characterization tool.

```

### Nighthawk output transformation utility

Nighthawk comes with a tool to transform its json output to its other supported output formats.

```bash
➜ bazel-bin/nighthawk_output_transform --help
```

```

USAGE:

Where:

--,  --ignore_rest
Ignores the rest of the labeled arguments following this flag.

--version
Displays version information and exits.

-h,  --help
Displays usage information and exits.

L7 (HTTP/HTTPS/HTTP2) performance characterization transformation tool.

```

**Example:** transform json output to fortio compatible format

> Notice that the default output format for `nighthawk_client` is "human", therefore to produce a json output you must run `nighthawk_client` with `--output-format json`. This json output is the one that can be transformed to the different formats as shown in the example below.

```
➜ /your/json/output/file.json | bazel-bin/nighthawk_output_transform --output-format fortio
```

## A sample benchmark run

```bash
# start the benchmark target (Envoy with a single worker in this case) on cpu-core 3.
➜ taskset -c 3 envoy --concurrency 1 --config-path ~/envoy.yaml

# run a quick benchmark using cpu-cores 4 and 5.
➜ taskset -c 4-5 bazel-bin/nighthawk_client --rps 1000 --connections 4 --concurrency auto --prefetch-connections -v info http://127.0.0.1:10000/
[21:28:12.690578][27849][I] [source/client/client.cc:71] Detected 2 (v)CPUs with affinity..
[21:28:12.690621][27849][I] [source/client/client.cc:75] Starting 2 threads / event loops. Test duration: 5 seconds.
[21:28:12.690627][27849][I] [source/client/client.cc:77] Global targets: 8 connections and 2000 calls per second.
[21:28:12.690632][27849][I] [source/client/client.cc:81]    (Per-worker targets: 4 connections and 1000 calls per second)
Nighthawk - A layer 7 protocol benchmarking tool.

Queueing and connection setup latency
  samples: 9992
  mean:    0s 000ms 002us
  pstdev:  0s 000ms 000us

Percentile  Count       Latency
  0           1           0s 000ms 001us
  0.5         5013        0s 000ms 002us
  0.75        7496        0s 000ms 002us
  0.8         8008        0s 000ms 002us
  0.9         8996        0s 000ms 002us
  0.95        9493        0s 000ms 002us
  0.990625    9899        0s 000ms 003us
  0.999023    9983        0s 000ms 004us
  1           9992        0s 000ms 027us

Request start to response end
  samples: 9992
  mean:    0s 000ms 108us
  pstdev:  0s 000ms 061us

Percentile  Count       Latency
  0           1           0s 000ms 073us
  0.5         4997        0s 000ms 111us
  0.75        7495        0s 000ms 113us
  0.8         7997        0s 000ms 114us
  0.9         8993        0s 000ms 116us
  0.95        9493        0s 000ms 120us
  0.990625    9899        0s 000ms 130us
  0.999023    9983        0s 000ms 528us
  1           9992        0s 004ms 083us

Initiation to completion
  samples: 9992
  mean:    0s 000ms 113us
  pstdev:  0s 000ms 061us

Percentile  Count       Latency
  0           1           0s 000ms 077us
  0.5         4996        0s 000ms 115us
  0.75        7495        0s 000ms 118us
  0.8         7998        0s 000ms 118us
  0.9         8993        0s 000ms 121us
  0.95        9493        0s 000ms 124us
  0.990625    9899        0s 000ms 135us
  0.999023    9983        0s 000ms 588us
  1           9992        0s 004ms 090us

Counter                                 Value       Per second
client.benchmark.http_2xx               9994        1998.80
client.upstream_cx_http1_total          8           1.60
client.upstream_cx_overflow             2           0.40
client.upstream_cx_rx_bytes_total       36008382    7201676.40
client.upstream_cx_total                8           1.60
client.upstream_cx_tx_bytes_total       599640      119928.00
client.upstream_rq_pending_total        2           0.40
client.upstream_rq_total                9994        1998.80

[21:28:18.522403][27849][I] [source/client/client.cc:279] Done.
```

## Visualizing the output of a benchmark

Nighthawk supports transforming the output into other well-known formats, such as:

- `dotted`: Provides integration with Prometheus
- `fortio`: Provides integration with [Fortio's report-only UI](https://github.com/fortio/fortio#report-only-ui)

The following is an example of a nighthawk benchmark visualized via the Fortio UI.

```bash
fortio report --data-dir ./samples/fortio_data
```

![Fortio Large Report](https://raw.githubusercontent.com/envoyproxy/nighthawk/main/samples/fortio_reports/large.png)

## Accuracy and repeatability considerations when using the Nighthawk client

- Processes not related to the benchmarking task at hand may add significant noise. Consider stopping any
  processes that are not needed.
- Be aware that power state management and CPU Frequency changes are able to introduce significant noise.
  When idle, Nighthawk uses a busy loop to achieve precise timings when starting requests, which helps minimize this.
  Still, consider disabling C-state changes in the system BIOS.
- Be aware that CPU thermal throttling may skew results.
- Consider using `taskset` to isolate client and server. On machines with multiple physical CPUs there is a choice here.
  You can partition client and server on the same physical processor, or run each of them on a different physical CPU. Be aware of the latency effects of interconnects such as QPI.
- Consider disabling hyper-threading.
- Consider tuning the benchmarking system for low (network) latency. You can do that manually, or install [tuned](http://manpages.ubuntu.com/manpages/bionic/man8/tuned-adm.8.html) and run:

| As this may change boot flags, take precautions, and familiarize yourself with the tool on systems that you don't mind breaking. For example, running this has been observed to mess up dual-boot systems! |
| --- |

```bash
sudo tuned-adm profile network-latency
```

- When using Nighthawk with concurrency > 1 or multiple connections, workers may produce significantly different results. That can happen because of various reasons:
  - Server fairness. For example, connections may end up being serviced by the same server thread, or not.
  - One of the clients may be unlucky and structurally spend time waiting on requests from the other(s)
    being serviced due to interference of request release timings and server processing time.
- Consider using separate machines for the clients and server(s).

nighthawk

다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

nighthawk

다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README