SplitViewAutoLayout

KO | EN

gitlite — search

#javascript #python #ai #typescript #android #macos #nodejs #java #windows #kubernetes #pytorch #security #openai #ios

SplitViewAutoLayout

(★ 15)

Example code demonstrating NSSplitView and NSScrollView using Auto Layout.

SplitViewAutoLayout 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

SplitViewAutoLayout
===================

This is a simple project to demonstrate how to use NSSplitView with Auto Layout. It consists of a three-paned view, where the middle pane contains an NSScrollView. The views are animated when expanding/collapsing. No categories or subclasses are used.

TL;DR

```objective-c
// Simply wrap the changes in an NSAnimationContext.
// The split view and sub layers must have CALayers turned on
// (can be done in Interface Builder by checking the boxes for each view).
//
- (IBAction)toggleLeftPane:(id)sender
{
	[NSAnimationContext runAnimationGroup:^(NSAnimationContext * _Nonnull context) {
		context.allowsImplicitAnimation = YES;
		context.duration = 0.25; // seconds
		context.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseOut];

if ([self.splitView isSubviewCollapsed:self.leftPane]) {
			// -> expand
			[self.splitView setPosition:_lastLeftPaneWidth ofDividerAtIndex:0];
		} else {
			// <- collapse
			_lastLeftPaneWidth = self.leftPane.frame.size.width; //  remember current width to restore
			[self.splitView setPosition:0 ofDividerAtIndex:0];
		}
		[self.splitView layoutSubtreeIfNeeded];
	}];
}
```

##### Model

The layout is roughly analogous to how Xcode is laid out. All sizes described below are set up with Auto Layout constraints.

* left pane has a minimum width of 100, but can grow (e.g. source view)
* right pane is always fixed with a width of 150 (e.g. a fixed inspector view)
* middle pane has minimum width of 50
* left and right panes can collapse either programmatically or via user dragging (i.e. classic NSSplitView behavior)
* the middle pane should be the most free to resize when the window is resized - the left pane should only be resized upon user interaction (manual resize or a button to collapse it); this is accomplished by setting the middle pane's holding priority lower than the left's
* there are buttons to toggle the left and right panes, and a third to load content into the middle pane

##### Project Settings

Edit the project scheme and add this to "Arguments Passed on Launch" - useful to debug any Auto Layout issues.

-NSConstraintBasedLayoutVisualizeMutuallyExclusiveConstraints YES

##### Steps Performed in Interface Builder

* drag NSSplit view to window's view
* drag an NSView into the split view to create a third pane
* drag two buttons to the top of the view
* constrain the buttons to the top and left/right edges of the containing view
* constrain the widths of the buttons
* control-drag from split view to enclosing view in each direction to create four constraints to fill the view, leaving space for the toggle buttons
* add an identifier to each pane view (`leftPane`, `middlePane`, and `rightPane`)
* select left pane, then Edit->Pin->Width, modify constraint created to a width of "greater than or equal" 100
* repeat with middle pane, modify constraint created to a width of "greater than or equal" 50
* select right pane, then Edit->Pin->Width, modify constraint created to a width of "greater than or equal" 100
* select the NSSplitView and change the holding priorities (the important thing is that the left pane have a higher value than the middle):
  * left pane: 255
  * middle pane: 250 (default)
  * right pane: 250 (default)

* in Interface Builder, turn on Core Animation layers for the split view and all sub views (optional, but required for transitions to be animated)

#### Troubleshooting

Initially I had this error upon running the application:

Unsupported Configuration Content rectangle not entirely on screen with the menu bar ( May not be completely seen for all screen resolution and configurations)

This was corrected by selecting the window itself in the xib, then the Size Inspector, and moving the initial position of the window to be centered horizontally and vertically on the screen. Not sure what was going on there.

#### NSSplitView Delegate Methods

It’s important to note that if some of the `NSSplitView` delegate methods are used, the view will revert to the old springs and structs layout. When using Auto Layout, do not implement these methods:

-splitView:constrainMinCoordinate:ofSubviewAt:
    -splitView:constrainMaxCoordinate:ofSubviewAt:
    -splitView:resizeSubviewsWithOldSize:
    -splitView:shouldAdjustSizeOfSubview:

#### Notes

The `NSScrollView` has a color background which is helpful for debugging.

SplitViewAutoLayout

SplitViewAutoLayout 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

SplitViewAutoLayout

SplitViewAutoLayout 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README