KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#developer-tools #typescript #codex #ai-agents #claude-code #dsh #dsh-plugin #cli #macos #ai-agent #deepseek-harness #open-source

usb-can

★ 68 Open GitHub ↗

USB-CAN Analyzer Linux Support

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# USB-CAN Analyzer Linux Support

This is a small C program that dumps the CAN traffic for one these adapters:
![alt text](https://raw.githubusercontent.com/kobolt/usb-can/master/USB-CAN.jpg)

These adapters can be found everywhere on Ebay nowadays, but there is no official Linux support. Only a Windows binary file [stored directly on GitHub](https://github.com/SeeedDocument/USB-CAN_Analyzer).

When plugged in, it will show something like this:
```
Bus 002 Device 006: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
```
And the whole thing is actually a USB to serial converter, for which Linux will provide the 'ch341-uart' driver and create a new /dev/ttyUSB device. So this program simply implements part of that serial protocol.

## Build

`canusb.c` can be compile just by running `make` or with:

```
$ gcc canusb.c -o canusb
```
## Usage

```
$ ./canusb -h
Usage: ./canusb <options>
Options:
  -h          Display this help and exit.
  -t          Print TTY/serial traffic debugging info on stderr.
  -d DEVICE   Use TTY DEVICE.
  -s SPEED    Set CAN SPEED in bps.
  -b BAUDRATE Set TTY/serial BAUDRATE (default: 2000000).
  -i ID       Inject using ID (specified as hex string).
  -j DATA     CAN DATA to inject (specified as hex string).
  -n COUNT    Terminate after COUNT frames (default: infinite).
  -g MS       Inject sleep gap in MS milliseconds (default: 200 ms).
  -m MODE     Inject payload MODE (0 = random, 1 = incremental, 2 = fixed).
```

## Example commands:
```
# dump CAN bus traffic from 1 Mbit CAN bus
$ ./canusb -t -d /dev/ttyUSB0 -s 1000000 -t

# send the bytes 0xBEEE from ID 005 on at 1 Mbit CAN bus
$ ./canusb -d /dev/ttyUSB0 -s 1000000 -t -i 5 -j BEEE
```

## Open source firmware:
If you experience problems with the default firmware for the USB-CAN adapter, then you can try the open source firmware from: https://github.com/Kosmonova/usb-can-firmware-stm32

usb-can

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README