kb1

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 27)

A fully custom DIY mechanical keyboard

kb1 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# `kb1`: a fully DIY mechanical keyboard

![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/full_centered.jpg)

Features:

- Mechanically built using two PCBs and a few screws and standoffs.
- Proper "tenkeyless" layout, compatible with Cherry MX-style switches (mine with Kailh box crystal jades)
- Per-key RGB backlight using reverse-mounted SK6812 neopixels
- Featuring an old-school 16x2 character display
- And of course a _knob_ (rotary encoder)
- Based on the Raspberry Pi Pico and [KMK](https://github.com/KMKfw/kmk_firmware)

## Why?

To challenge myself and practice PCB design!

Is it tons of fun to design and build your own keyboard from scratch? Hell yeah. Would I recommend this board for daily use? Not really :^)

## PCB

![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/pcb_kicad.png)

See `hardware/` for the KiCad files. There is a `gerbers/` folder with ZIP files ready to upload to a PCB fab.

## Firmware

Installing:
1. Grab Circuitpython, the Adafruit Circuitpython Neopixel library, and the KMK base files
2. Copy `firmware/*.py` to your Circuitpython drive

It's just a simple KMK setup with scaffolding code for the display and RGB. Actually doing something with the display is still TBD.

As a demo there is currently a bit of logic to map individual RGB leds to keys so it can light up a key when pressed. Twisting the knob changes the overall backlight color.

## Pics

| | |
|:---:|:---:|
|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/bottom.jpg)|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/inside_pico.jpg)|
|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/left_view.jpg)|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/right_view.jpg)|
|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/top_back_view.jpg)|![](https://raw.githubusercontent.com/ThomasRinsma/kb1/main/pics/kb1.jpg)|

## Errata / improvements for next version

Latest version: v1 (but the gerbers say v2, sorry..)

- Display pinout doesn't work well with a JST connector due to the orientation, requires manual soldering
- Pico orientation is awkward, I needed a USB type-C 90 degree adapter
- Several nuts nearly touch (covered) traces, doesn't appear to be a problem though
- The top plate could have some more copper for rigidity

## BoM

TODO

## Disclaimer

This is my own hobby project and I'm a total PCB design newbie. Use the info and files provided here at your own risk.

kb1

kb1 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

kb1

kb1 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README