SignalRF

KO | EN

gitlite — search

#python #ai #android #machine-learning #deep-learning #linux #docker #windows #cli #kubernetes #vue #awesome-list #openai #mcp

(★ 9)

Multi-tool RF analysis firmware for M5Stack Cardputer - WiFi scanner, BLE scanner, ultrasonic detector, signal mapper, and tracker detector

SignalRF 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

```
███████╗██╗ ██████╗ ███╗   ██╗ █████╗ ██╗         ██████╗ ███████╗
██╔════╝██║██╔════╝ ████╗  ██║██╔══██╗██║         ██╔══██╗██╔════╝
███████╗██║██║  ███╗██╔██╗ ██║███████║██║         ██████╔╝█████╗
╚════██║██║██║   ██║██║╚██╗██║██╔══██║██║         ██╔══██╗██╔══╝
███████║██║╚██████╔╝██║ ╚████║██║  ██║███████╗    ██║  ██║██║
╚══════╝╚═╝ ╚═════╝ ╚═╝  ╚═══╝╚═╝  ╚═╝╚══════╝    ╚═╝  ╚═╝╚═╝
```

**Multi-Tool RF Analysis Firmware for M5Stack Cardputer**

---

## Quick Start

1. Download `SignalRF_Default.bin` from the [SignalRF folder](SignalRF/)
2. Flash to your Cardputer:
   ```bash
   esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 write_flash 0x0 SignalRF_Default.bin
   ```
3. Press any key to enter the main menu

That's it. No libraries to install, no code to compile.

---

## What It Does

Signal RF turns your M5Stack Cardputer into a portable RF analysis toolkit. Five tools in one firmware:

| Tool | What It Does |
|------|--------------|
| **WiFi Scanner** | Scan networks, view signal strength, track RSSI over time |
| **BLE Scanner** | Find Bluetooth devices, identify vendors, monitor signals |
| **Ultrasonic Detector** | Real-time spectrum analyzer, detects frequencies above 18kHz |
| **Signal Mapper** | Map WiFi/BLE coverage across a 5x5 grid |
| **Tracker Detector** | Find AirTags, Tiles, and other tracking devices near you |

---

## Features

- **Color-coded signal strength** - Green (strong), Yellow (medium), Red (weak)
- **New device alerts** - Audio notification when new devices appear
- **RSSI graphing** - Track signal strength over time in device detail view
- **Vendor lookup** - Identify device manufacturers via OUI database (optional)
- **Tracker detection** - Scan for AirTags, Tile, Samsung SmartTags
- **Ultrasonic alerts** - Detect hidden ultrasonic transmitters
- **Battery indicator** - Monitor your Cardputer's battery level
- **SD card support** - Load OUI database for vendor identification

---

## Controls

All tools use simple keyboard controls:

| Key | Action |
|-----|--------|
| `1-5` | Select tool from main menu |
| `W/S` | Navigate up/down |
| `Enter` | Select / View details |
| `R` | Rescan |
| `Backspace` | Back / Return to menu |

See [CONTROLS.md](SignalRF/CONTROLS.md) for complete control reference.

---

## Hardware Requirements

- **M5Stack Cardputer** (ESP32-S3)
- **MicroSD Card** (optional) - For OUI vendor database
  - FAT32 formatted
  - 64GB or smaller recommended

---

## OUI Database Setup (Optional)

The OUI database enables vendor/manufacturer lookup for MAC addresses. Signal RF works fine without it - you just won't see vendor names.

### Getting the Database

Download the IEEE OUI database and convert it, or create your own `oui.txt`:

```
AABBCC|Apple Inc
001A2B|Samsung Electronics
```

Format: `MAC_PREFIX|Vendor Name` (one per line, no colons in MAC)

### Installation

1. Format microSD as FAT32
2. Place `oui.txt` in the root directory
3. Insert into Cardputer

---

## Building From Source

If you want to modify the firmware:

### Prerequisites
- Arduino IDE or arduino-cli
- M5Stack board support package
- Libraries: M5Cardputer, WiFi, BLEDevice, arduinoFFT, SD

### Compile & Flash

1. Open `SignalRF/SignalRF.ino` in Arduino IDE
2. Select board: M5Stack Cardputer
3. Compile and upload

---

## Themes

Signal RF includes a theme system. Edit `SignalRF.ino` to switch:

```cpp
// Uncomment ONE theme:
//#define THEME_DEFAULT
#define THEME_SASQUATCH
```

---

## Tips

- **Find WiFi dead zones** - Use Signal Mapper to walk around and sample coverage
- **Detect tracking devices** - Tracker Detector can find unknown BLE devices following you
- **Track signal changes** - In Device Detail view, press `R` repeatedly while moving
- **Find hidden transmitters** - Ultrasonic Detector can identify ultrasonic beacons

---

## Acknowledgments

This project was built on the shoulders of the open source community. Special thanks to:

- **[Bruce](https://github.com/pr3y/Bruce)** - A major inspiration for this project. The Bruce firmware showed what's possible on the Cardputer platform and motivated me to contribute something back to this community.
- **M5Stack** - For creating the Cardputer and maintaining excellent Arduino libraries
- **The ESP32 community** - For the countless libraries and examples that make projects like this possible
- Everyone who shares their code openly - you make it possible for newcomers to learn, build, and contribute

This is my first release to the community. I hope Signal RF is useful to you. Fork it, modify it, make it your own.

---

## Contributing

Pull requests welcome. If you build something cool with this, I'd love to see it.

---

## License

MIT License - Free to use, modify, and distribute. See [LICENSE](LICENSE).

---

## Author

**Byte**

Built for the M5Stack Cardputer community.

SignalRF

SignalRF 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

SignalRF

SignalRF 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README