2jciebu-usb-raspberrypi

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

2jciebu-usb-raspberrypi

(★ 33)

No description available.

2jciebu-usb-raspberrypi 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# 2jciebu-usb-raspberrypi
It is a sample program for evaluating Omron's sensor 2JCIE-BU with Raspberry Pi 3 Model B.

2JCIE-BU is a multifunction sensor module that can be used for sensing various environmental information.  
Various sensors such as temperature, humidity, light, barometric pressure, noise, 3 axis acceleration, etc. are equipped.  
Earthquakes can be judged based on highly accurate vibration acceleration.  
We utilize a volatile organic compound (VOC GAS) sensor to realize continuous monitoring of indoor air quality.  
USB and Bluetooth® are provided as interfaces.

## language
- [English](./README.md)
- [Japanase](./README_ja.md)

## Description
- sample_2jciebu.py  
It is a sample program that can acquire sensing data with the USB serial interface and check it on the console.  
The LED lights up while data is being acquired.

***DEMO:***  
When you run sample_2jciebu.py, you can see the sensing data on console.

![console_demo](https://raw.githubusercontent.com/omron-devhub/2jciebu-usb-raspberrypi/master/console_demo.png)

## Installation
1. It is necessary to install dependency software beforehand.  
    [Dependencies](#link)
2. Open Terminal and execute the following command.    
    ```
    $ mkdir omron_sensor
    $ cd omron_sensor
    $ git clone https://github.com/omron-devhub/2jciebu-usb-raspberrypi.git
    ```

## Usage
Procedure to operate the sample program.
- sample_2jciebu.py  
Open Terminal and execute the following command.  
    ```
    $ sudo modprobe ftdi_sio
    $ sudo chmod 777 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
    $ sudo echo 0590 00d4 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
    $ sudo python3 sample_2jciebu.py
    ```
    To stop, press Ctrl + C.

## Dependencies
2jciebu-usb-raspberrypi requires the following dependencies:
- [Python3](https://www.python.org/)
- [pyserial](https://pythonhosted.org/pyserial/pyserial.html#installation)

## Contributors
Thank you to all our [contributors](https://github.com/omron-devhub/2jciebu-usb-raspberrypi/graphs/contributors) !

Licensed under the MIT License.

2jciebu-usb-raspberrypi

2jciebu-usb-raspberrypi 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

2jciebu-usb-raspberrypi

2jciebu-usb-raspberrypi 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README