linux_apps_opensource

KO | EN

gitlite — search

#react #ai #typescript #android #machine-learning #deep-learning #docker #awesome #awesome-list #pytorch #security #openai #ios #open-source

linux_apps_opensource

(★ 11)

fibocom open source code

linux_apps_opensource 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Fibocom Linux apps
This is a Fibocom linux apps set project for wwan devices. 
 **Flash service:** firmware update, switch, recovery. 
 **Ma service:** fccunlock(It is not open source). 
 **Config service:** OEM configuration function. 
 **Helper service:** provider dbus API for Flash/Ma/Config service.

# License
The fibo_flash fibo_config fibo_helper binaries are both GPLv2+.

# Notice
 - Service must be used with fw_package. Before installing service, ensure that fw_package has been installed. Obtain the fw package from the corresponding OEM . 
 - fw_switch using fastboot so you can install fastboot with command `sudo apt-get install fastboot` 
 - MA service default not enable if you want to used you should copy `/opt/fibocom/fibo_ma_service/fcc-unlock.d` to `/usr/lib/x86_64-linux-gnu/ModemManager/` command :
 1. `cp -raf /opt/fibocom/fibo_ma_service/fcc-unlock.d /usr/lib/x86_64-linux-gnu/ModemManager/`
 2. `rm -rf /opt/fibocom/fibo_ma_service/fcc-unlock.d`
 3. `chown -R root:root /usr/lib/x86_64-linux-gnu/ModemManager/fcc-unlock.d`
 4. `chmod 755 -R /usr/lib/x86_64-linux-gnu/ModemManager/fcc-unlock.d`
- This application runs only on ubuntu22.04,other ubuntu versions and other OS have unverified.
# Building on Ubuntu

## 1. Install

- sudo apt install cmake 
- sudo apt install build-essential 
- sudo apt install -y pkg-config 
- sudo apt install libglib2.0-dev 
- sudo apt install libxml2-dev 
- sudo apt install libudev-dev 
- sudo apt install libmbim-glib-dev 
- sudo apt install libdbus-1-dev 
- sudo apt install libmm-glib-dev

## 2. Build
1. cmake -S . -B build 
 if you want to install custom path you can send cmd: 
 `cmake -S . -B build --install-prefix <custm path>` 
2. cmake --build build 
3. sudo cmake --install build 
 if you install custom path in home path you can send cmd: 
 `cmake --install`

## 3. If using systemd, use
- load config file 
 sudo systemctl daemon-reload
- enable service 
 sudo systemctl enable fibo_xxx.service 
 **examples:** sudo systemctl enable fibo_helper.service 
&emsp;&emsp;&emsp;&emsp;&emsp;sudo systemctl enable fibo_helper_mbim.service 
&emsp;&emsp;&emsp;&emsp;&emsp;sudo systemctl enable fibo_flash.service 
&emsp;&emsp;&emsp;&emsp;&emsp;sudo systemctl enable fibo_config.service 
**notices:** this step must be done,then systemd can find and start the service 
- start service 
	sudo systemctl start fibo_xxx.service 
- Get status 
	sudo systemctl status fibo_xxx.service 
- Stop service 
	sudo systemctl stop fibo_xxx.service

# release history
- version:1.0.0 
 first version, add flash firmware,recovery service. 
- version:1.0.2 
 1. modify project build script 
 2. optimize helper and flash service source code 
- version:1.0.3 
 modify project build script 
- version:1.0.4 
 fw switch: 
 1. FWSwitch can not be triggered after hotplug switch verizon to CUCC sim card. (mccmnc 6 bit switch to 5 bit)

recovery: 
 1. The oem is damaged. After the module is powered on, recovery is triggered to burn the oem. 
 2. Stop the timer when the fastboot port appears.

Ma Service: 
 1. If an exception is returned, modify the judgment string 
 2. Add the SKU ID

helper: 
 1. Support MBIM message indication and revert previous MM indication support. 
 2. Re-add timeout recovery mechanism if helperm is no response. 
 3. When the helper returns a command to the caller, the code logic is incorrect. 
- version:1.0.5 
 config_service: 
 1. support sim card slot switch slot 1. 
 
 helper: 
 1. The SIM card status and MCCMNC on the network side can be queried using mbim messages. 
 2. recovery You can select the version number to flash.

fw switch: 
 1. Support low-battery upgrade in AC mode. 
 2. If the obtained SubSysid is empty, no upgrade is performed.

- version:1.0.6 
 Fix spelling errors in source code 
 
 helper: 
 1. The optimization progress bar is displayed 
 2. Optimize recovery download logic 
 3. modify helperm abnormal stuck status 
 
 fw switch: 
 1. Can't do FW switch after recovery when port state is abnormal on first boot. 
 2. Support monitoring of new package installation.

- version:1.0.7 
 1. modify source code compiling warning 
 2. modify all service log format

- version:1.0.8 
 1. optimized config code 
 2. modify log level 
 3. flash service print log without fw_package

- version:1.0.11 
 1. Modify FWFlashServie flash logic.

linux_apps_opensource

linux_apps_opensource 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

linux_apps_opensource

linux_apps_opensource 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README