KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#dsh #dsh-plugin #developer-tools #ai-agent #claude-code #codex #typescript #ai-agents #deepseek-harness #mcp #cli #rust

Home-Assistant-Bedjet

★ 36 Open GitHub ↗

Bedjet Home Assistant Mqtt Integration

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Home-Assistant-Bedjet V0.0.2
Bedjet Home Assistant Mqtt Integration

This is a reverse engineered bluetooth mqtt bridge for bedjet to connect with home assistant.

This should work on any lunux pc with bluetooth le support but is tested on a raspberry pi and BedJet v3.

Whats working:
  - Basic comunications with bedjet via bluetooth le
  - Controls
    - Modes (off, cool, heat, dry, turbo, ext heat)
    - Fan Up
    - Fan Down
    - Temp Up
    - Temp Down
    - Start Preset (m1, m2, m3)

- Sensors
    - Mode
    - Current Temprature
    - Set Temprature
    - Time Remaining
    
  - Direct Setting
    - Temprature
    - Time Remaining
    - Fan Speed (5% increments) 
  
Todos:
  - Handle error conditions / disconnects
  - Better config example
  - Bedjet autodetection
    - Start multiple threads for multiple bedjets
  - MQTT discovery?
  - Setup instructions
  - Python package

Notes:
  - I will not be supporting setting and retreving wifi info as wifi serves no pratical use on the bedjet at this time and it is a pain to do.

Home-Assistant-Bedjet

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README