bme680

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 31)

Pure Rust BME680 implementation

bme680 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

BME680 + Rust [![Actions Status](https://github.com/marcelbuesing/bme680/workflows/Continuous%20integration/badge.svg)](https://github.com/marcelbuesing/bme680/actions?query=workflow%3A"Continuous+integration")
[![Cargo Deny Status](https://img.shields.io/badge/cargo--deny-license%20checked-green)](https://github.com/marcelbuesing/bme680/actions?query=workflow%3A"Continuous+integration")
=============

This repository contains a pure Rust implementation for the [BME680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) environmental sensor. The library can be used to read the gas, pressure, humidity and temperature sensors via I²C.

The library uses the [embedded-hal](https://github.com/japaric/embedded-hal) library to abstract reading and writing via I²C. In the examples you can find a demo how to use the library in Linux using the [linux-embedded-hal](https://github.com/japaric/linux-embedded-hal) implementation.

# Alternative
[drogue-bme680](https://github.com/drogue-iot/drogue-bme680)

# Example getting started Linux

Determine the I2C device path

```
pi@raspberrypi:~ $ i2cdetect -y -l
i2c-1    i2c       bcm2835 I2C adapter             I2C adapter
```

Determine I2C-Address of sensor, `0x76` is the primary address, `0x77` is the secondary address.
If in doubt determine the address via the following command:

```
pi@raspberrypi:~ $ i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- 76
```

# Example Influx Client
The examples folder contains an example for a simple influx database client inserting collected values.
Below you may find examples of Chronograf graphs of an indoor measurement over a period of 30 days.

![Temperature Graph](https://raw.githubusercontent.com/marcelbuesing/bme680/master/examples/res/influx_temperature.png "Temperature measurement in C°")
![Humidity Graph](https://raw.githubusercontent.com/marcelbuesing/bme680/master/examples/res/influx_humidity.png "Humidity measurement in %")
![Air pressure Graph](https://raw.githubusercontent.com/marcelbuesing/bme680/master/examples/res/influx_pressure.png "Air pressure measurement in hPa")
![Gas resistance Graph](https://raw.githubusercontent.com/marcelbuesing/bme680/master/examples/res/influx_gas_resistance.png "Gas resistance measurement")

bme680

bme680 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

bme680

bme680 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README