axi4lite2uart

★ 25 Open GitHub ↗

This IP provides a bridge between UART signals and the Advanced Microcontroller Bus Architecture (AMBA®) AXI4 Lite interface.

Explore Similar Repositories

jtag-boundary-scan : Using JTAG on STM32F103C8T6 to get device ID(IDCODE) and utilize other JTAG instructions such as BYPASS, EXTEST, SAMPLE/PRELOAD. Tera Term is used with UART to have a command-line interface (CLI) to use the instructions.
fpga-uart-tx-rx : Basic UART TX/RX module for FPGA
seeed-ambd-firmware : This RTL8720DN firmware export a RPC server interface through hardware SPI/UART port to MCU.
MFRC522-UART-Arduino : Arduino library for MFRC522 based modules via UART interface.
UART2NAND : Interface for exposing raw NAND i/o over UART to enable pc-side modification.
// repository documentation