ha-ppc-smgw

KO | EN

gitlite — search

#react #llm #golang #android #machine-learning #java #nodejs #awesome-list #pytorch #security #mcp #ios #openai #open-source

(★ 95)

HomeAssistant Component to integrate PPC, Theben and EMH SMGWs

ha-ppc-smgw 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ha-ppc-smgw

[![Open your Home Assistant instance and open a repository inside the Home Assistant Community Store.](https://my.home-assistant.io/badges/hacs_repository.svg)](https://my.home-assistant.io/redirect/hacs_repository/?owner=jannickfahlbusch&repository=ha-ppc-smgw&category=integration)

HomeAssistant component to read SMGWs.

This custom integration allows you to integrate the following Smart Meter Gateways into HomeAssistant:
* PPC SMGW
* Theben Conexa
* EMH Casa

## Installation

This component is installable via [HACS](https://www.hacs.xyz/).

Add the repository as a custom repository using [this guide](https://www.hacs.xyz/docs/faq/custom_repositories/).

Click on the badge above or use this [link](https://my.home-assistant.io/redirect/hacs_repository/?owner=jannickfahlbusch&repository=ha-ppc-smgw) to get redirected to the HACS store from where you can install the component.

Restart your instance and head over to the integration overview (Or use [this link](https://my.home-assistant.io/redirect/config_flow_start/?domain=ppc_smgw) to directly go to the configuration of this component) to start configuring the integration.

## Requirements

In order to connect to your Gateway, you need at least the following information:

* IP address of the SMGW within your home network
* Credentials (Username and Password) for the Gateway

## Configuration

| Option | Description |
|--------|-------------|
| Display Name | The Name of the resulting device |
| URL | URL to the SMGW. |
| Username | The username for authentication with the PPC Smart Meter Gateway. You should have received this from your electricity provider |
| Password | The password for authentication with the PPC Smart Meter Gateway. You should have received this from your electricity provider |
| Update Interval | The interval in minutes for updating the data from the PPC Smart Meter Gateway. Defaults to 5 minutes. |

Please note that most providers have configured the SMGW to update the values only every 15 to 20 minutes.
You should choose an interval that is reasonably large as polling too frequently might lead to a lockdown of the SMGW after a yet to be clarified amount of polls.

## Troubleshooting

* Setup fails with "no session cookie in response (HTTP 200)" - if your SMGW was installed by 'Energy Metering Germany GmbH' for Octopus Energy please contact them. They have to reconfigure the SMGW.

ha-ppc-smgw

ha-ppc-smgw 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ha-ppc-smgw

ha-ppc-smgw 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README