pymiproxy - GitLite

KO | EN

gitlite — search

#python #go #android #deep-learning #linux #macos #windows #awesome #cli #kubernetes #awesome-list #pytorch #mcp #ios

pymiproxy

(★ 218)

A small and sweet man-in-the-middle proxy capable of doing HTTP and HTTP over SSL.

File Explorer

Download Latest Version (.zip)

- - __init__.py
  - proxy.py
.gitignore
README.md
setup.cfg
setup.py

# Installation Guide

1. Get the code

git clone https://github.com/allfro/pymiproxy

Downloads the entire project code from GitHub to your computer.

cd pymiproxy

Moves into the project folder you just downloaded.

2. Python

Easy Recommended

Prerequisites

Git Needed to download the project code from GitHub.
Python 3 On Windows, be sure to check 'Add Python to PATH' during installation.

$ python -m miproxy.proxy

Runs the Python script (or module).

✅ If it runs without errors and prints output in the terminal, it worked.

Pulled directly from this repo's README.

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# pymiproxy - Python Micro Interceptor Proxy

A small and sweet man-in-the-middle proxy capable of doing HTTP and HTTP over SSL.

## Introduction

pymiproxy is a small, lightweight, man-in-the-middle proxy capable of performing HTTP and HTTPS (or SSL) inspection. The
proxy provides a built-in certificate authority that is capable of generating certificates for SSL-based destinations.
Pymiproxy is also extensible and provides two methods for extending the proxy: method overloading, and a pluggable
interface. It is ideal for situations where you're in dire need of a cool proxy to tamper with out- and/or in-bound HTTP
data.

## Installation Requirements

The following modules are required:

- pyOpenSSL

## Installation

Just run the following command at the command prompt:

```bash
$ sudo python setup.py install
```

## Usage

The module offers a few examples in the code. In brief, pymiproxy can be run right-away by issuing the following command
at the the command-prompt:

```bash
$ python -m miproxy.proxy
```

This will invoke pymiproxy with the ```DebugInterceptor``` plugin which simply outputs the first 100 bytes of each request
and response. The proxy runs on port 8080 and listens on all addresses. Go ahead and give it a try.

## Extending or Implementing pymiproxy

There are two ways of extending the proxy:

- Develop and register an Interceptor plugin; or
- Overload the ```mitm_request```, and ```mitm_response``` methods in the ```ProxyHandler``` class.

The decision on which method you choose to use is entirely dependant on whether or not you wish to push the data being
intercepted through a set of interceptors or not.

### Interceptor Plugins

There are currently two types of interceptor plugins:

- ```RequestInterceptorPlugins```: executed prior to sending the request to the remote server; and
- ```ResponseInterceptorPlugins```: executed prior to sending the response back to the client.

The following flow is taken by pymiproxy in this mode:

1. Client request received
2. Client request parsed
3. Client request processed/transformed by Request Interceptor plugins
4. Updated request sent to remote server
5. Response received by remote server
6. Response processed/transformed by Response Interceptor plugins
7. Updated response sent to client

You can register as many plugins as you wish. However, keep in mind that plugins are executed in the order that they are
registered in. Take care in how you register your plugins if the result of one plugin is dependent on the result of
another.

The following is a simple code example of how to run the proxy with plugins:

```python
from sys import argv
from miproxy.proxy import RequestInterceptorPlugin, ResponseInterceptorPlugin, AsyncMitmProxy

class DebugInterceptor(RequestInterceptorPlugin, ResponseInterceptorPlugin):

def do_request(self, data):
            print '>> %s' % repr(data[:100])
            return data

def do_response(self, data):
            print '<< %s' % repr(data[:100])
            return data

if __name__ == '__main__':
    proxy = None
    if not argv[1:]:
        proxy = AsyncMitmProxy()
    else:
        proxy = AsyncMitmProxy(ca_file=argv[1])
    proxy.register_interceptor(DebugInterceptor)
    try:
        proxy.serve_forever()
    except KeyboardInterrupt:
        proxy.server_close()
```

### Method Overloading

The alternate approach to extending the proxy functionality is to subclass the ProxyHandler class and overload the
```mitm_request``` and ```mitm_response``` methods. The following is a quick example:

```python
from sys import argv
from miproxy.proxy import AsyncMitmProxy, ProxyHandler

class MitmProxyHandler(ProxyHandler):

def mitm_request(self, data):
        print '>> %s' % repr(data[:100])
        return data

def mitm_response(self, data):
        print '<< %s' % repr(data[:100])
        return data

if __name__ == '__main__':
    proxy = None
    if not argv[1:]:
        proxy = AsyncMitmProxy(RequestHandlerClass=MitmProxyHandler)
    else:
        proxy = AsyncMitmProxy(RequestHandlerClass=MitmProxyHandler, ca_file=argv[1])
    try:
        proxy.serve_forever()
    except KeyboardInterrupt:
        proxy.server_close()
```

Note: In both cases, the methods that process the data need to return the data back to the proxy handler. Otherwise,
you'll get an exception.

## Kudos

Thanks to the great documentation at python.org, GnuCitizen's PDP for the ideas, the pyOpenSSL group for making a great
OpenSSL API.