RFID

KO | EN

gitlite — search

#javascript #hacktoberfest #ai #typescript #llm #android #machine-learning #linux #docker #nodejs #java #windows #openai #open-source

(★ 8)

Arduino library to support Melexis MLX90109 RFID tag reader ICs

RFID 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# mrRFID

Arduino library with support for Melexis MLX90109 RFID tag reader ICs.

This library supports 125 Khz RFID tag readers based on Melexis MLX90109 ICs.

![alt text](https://raw.githubusercontent.com/markreds81/RFID/master/extras/EVB90109_V3_arduino1.jpg "EVB90109_V3 with Arduino board")

## Example

```c++
#include <RFID.h>

#define CLOCK_PIN    13
#define DATA_PIN     12

void onTagRead(const String &tag) {
    Serial.println(tag);
    RFID.begin(CLOCK_PIN, DATA_PIN);
}

void setup() {
    Serial.begin(115200);
    RFID.attach(onTagRead);
}

void loop() {
    RFID.loop();
}
```

See "RFID_Callback.ino" for the complete example.

## Documentation

MLX90109 requires two pin on the MCU side configured as digital inputs: one for CLOCK signal and the other one for DATA signal. All the required initializations are done by the library.

Most of the tag reader IC pins can’t be left floating and they have to be pulled up/down. On the EVB90109_V3 evaluation board pin 3 (SPEED) and pin 7 (MODE)) are connected to 10 (VDD), while pin 6 (MODUR2) is connected to VSS. Pins for Fast Decay and MODUR3 can be left floating since I don’t use fast decay nor on/off modulation in  my setup, and regarding MODUR3 components for this aren’t soldered on the evaluation board by default.

![alt text](https://raw.githubusercontent.com/markreds81/RFID/master/extras/EVB90109_V3_arduino2.jpg "EVB90109_V3 evaluation board (front side)")

![alt text](https://raw.githubusercontent.com/markreds81/RFID/master/extras/EVB90109_V3_arduino3.jpg "EVB90109_V3 evaluation board (back side)")

### Definitions

`RFID_UID_LEN` is the binary length of a tag (5 bytes).

### Construction and initialization

```c++
RFIDClass myRFID (
    uint8_t clockPin,
    uint8_t dataPin
);
```

### Functions

```c++
void begin();
```

```c++
void begin(const uint8_t clockPin, const uint8_t dataPin);
```
Must be called in setup() function.

```c++
void loop();
```
Must be called in loop() function.

```c++
RFIDStatus status();
```

Returns:
* a value < 0 if an error has occurred. It could be one of the following:
    * `RFID_MLX_ERR_TIMEOUT` when a timeout error is occurred.
    * `RFID_MLX_ERR_HPARITY` if the horizonatal parity check fails.
    * `RFID_MLX_ERR_VPARITY` if the vertical parity check fails.
    * `RFID_MLX_ERR_BITSTOP` if not bit stop found.
* 0 if no tag deteted
* a value > 0 if a tag is read

```c++
void attach(void (*callback)(const String &tag));
```
Set a callback function called when a tag is read. The `tag` parameter contains the UID in HEX format.

```c++
void uid(uint8_t *dst, const size_t len);
```
Put the last UID tag read (binary raw values). `dst` is a byte array pointer of `len` size to fill with UID data.
It must be length at least `RFID_UID_LEN` (default to 5).

```c++
void tag(char *dst, const size_t len);
```
Put the last UID tag read in HEX string format. `dst` is a char array pointer of `len` size to fill with UID data.
It must be length at least double `RFID_UID_LEN` plus 1 for string terminator.

```c++
uint8_t uid8(const uint8_t i);
```
Return the `i`st element of the last UID tag read.

For any further reading about MLX90109 see details at https://www.melexis.com/en/product/MLX90109/125kHz-RFID-Transceiver.
For my tests I used the evaluation board EVB90109_V3 https://www.melexis.com/en/product/evb90109/evaluation-board-mlx90109.

## Installation

To install, download the .zip file: https://github.com/markreds81/RFID/archive/master.zip and rename the *RFID-master* folder to *RFID*. Move the *RFID* folder to your *Arduino/libraries* folder and restart the Arduino IDE.  This library should work on Arduino IDE v1.5 and later.

## License

This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 3 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with this library. If not, see <http://www.gnu.org/licenses/>.

RFID

RFID 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

RFID

RFID 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README