emeir

KO | EN

gitlite — search

#hacktoberfest #golang #go #machine-learning #linux #docker #macos #nodejs #java #cli #kubernetes #pytorch #mcp #open-source

(★ 21)

Monitor the counter of an electricity meter with Arduino and infrared light sensor

emeir 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# emeir
Monitor the counter of an electricity meter with Arduino and infrared light sensor.

![Electricity meter with infrared light barrier](https://www.kompf.de/tech/images/countemeir.jpg)

The software consists of two parts:

* Data acquisition part running on an Arduino Nano. It controls the infrared light barrier, detects trigger levels and communicates with a master computer over USB serial.
* Data recording part running on a the master computer (Raspberry Pi). It retrieves the data from the Arduino over USB serial and stores counter and consumption values into a round robin database.

There is a blog in german language that explains use case and function: [Infrarot Lichtschranke mit Arduino zum Auslesen des Stromzählers](https://www.kompf.de/tech/emeir.html).

## Commands from host (RasPi) to Arduino

* __D__ - retrieve and print raw data
* __T__ - enter trigger mode and print trigger data (0/1)
* __S__ _low_ _high_ - Set trigger levels (e.g. 85 90)
* __C__ - Cancel data acquisition and enter command mode

Arduino is in trigger mode upon start - Send __C__ to enter command mode

## Schematics

![Schematics](https://www.kompf.de/tech/images/reflsensor.png)

emeir

emeir 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

emeir

emeir 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README