UnoCart

KO | EN

gitlite — search

#python #hacktoberfest #react #ai #go #rust #linux #docker #nodejs #macos #windows #security #openai #open-source

(★ 70)

The Ultimate Cart's little brother (Atari 8-bit XL/XE multicart)

UnoCart 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

UnoCart
=======
The UnoCart is an SD-card multicart for the Atari 8-bit (XL & XE), supporting ROMs,CARs,XEXs and some ATR files.
It is the little brother of the [Ultimate Cart](https://github.com/robinhedwards/UltimateCart/).

The multicart is based on a STM32F4 microcontroller running at 168MHz. This is (just) fast enough to respond to requests
from the Atari's 6502 bus clocked at approximately 2 MHz. Files are loaded from SD card into the STM32F4's SRAM allowing
emulation of Atari cartridges up to 128k in size.

![Image](https://raw.githubusercontent.com/robinhedwards/UnoCart/master/images/menu_small.jpg)

When the Atari first boots, the cartridge displays a list of all the files on the SD card. When a ROM or CAR file is
selected, the cartridge will then emulate the selected cartridge type. The UnoCart supports standard 8k and 16k ROMS,
XEGS cartridges up to 128k in size, AtariMax 1mbit, Bounty Bob, OSS cartridges and many more.

XEX files (Atari executables) are also supported using a XEX loader built into the cartridge.

The cartridge can also emulate a disk drive on an Atari with with at least 64k. It does this by installing a Soft OS into
the Atari which then redirects D1: to the ATR file selected from the menu. Access for D2: upwards continue to be directed
to the SIO port as normal.
Many games will not work, due to the soft OS technique used. However it is possible to boot to a DOS 2.5 ATR file,
do some programming in BASIC and save your program back to the ATR file. ATR files up to 16Meg in size are supported.

Hardware
--------
The UnoCart was first designed using a STM32F407 DISCOVERY board. An article describing how to build an UnoCart using
this board was published in [Excel Magazine](http://excel-retro-mag.co.uk) issue #4.
You can also get a PDF of the article [here](https://github.com/robinhedwards/UnoCart/blob/master/UnoCart_EXCEL4.pdf).

I have also designed a custom PCB for the UnoCart pictured here. If you are interested in a ready to use cartridge (complete with
3d printed case) these are currently being produced by Marlin Bates in the USA: [website](http://www.thebrewingacademy.com/)
or email thebrewingacademy@gmail.com.

![Bottom/Back of PCB when inserted in Atari](https://raw.githubusercontent.com/robinhedwards/UnoCart/master/images/board_front.jpg)
![Top/Front of PCB when inserted in Atari](https://raw.githubusercontent.com/robinhedwards/UnoCart/master/images/board_back.jpg)

Firmware
--------
The UnoCart firmware is open source under a GPL license and is hosted here.

Credits
-------
* Design, hardware and firmware by Robin Edwards (electrotrains at atariage)
* XEX loader and OS modifications by Jonathan Halliday (flashjazzcat at atariage)
* Altirra LLE OS used with permision from Avery Lee (phaeron at atariage)
* German translation of user manual by Florian D (FlorianD at atariage)
* Production by Marlin Bates (MacRorie at atariage)

UnoCart

UnoCart 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

UnoCart

UnoCart 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README