angular-nx-cypress-coverage-example

KO | EN

gitlite — search

#hacktoberfest #react #android #rust #deep-learning #macos #java #windows #cli #kubernetes #vue #pytorch #openai #open-source

angular-nx-cypress-coverage-example

(★ 12)

Code Coverage for Cypress e2e-Tests on an Angular + @nrwl\nx-Monorepo Project

angular-nx-cypress-coverage-example 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# CoverageWorkspace

<p align="center"><img src="https://raw.githubusercontent.com/nrwl/nx/master/nx-logo.png" width="100">🔎 <b>Nx is a set of Extensible Dev Tools for Monorepos.</b></p>

## Further info on NX itself

Visit the [Nx Documentation](https://nx.dev/angular) to learn more.

## Running the example

### Preparation

Install the packages as usual with
`npm install`

If you haven't used nx before, you might need to run `npm install @nrwl/nx` as well.

### Running

At least on Windows, there might be problems with locating `nyc`. You can solve that by either putting your `node_modules/.bin` on PATH (and of course restarting your terminal to make sure it's applied) or prefixing all execution commands with `npx`.

#### NX-style

NX generates a lot of commands to run the application, also with more elaborate configurations. They can be run directly in command line, being specified in `nx.json`.

For running e2e-Tests of the app, run
> nx run cov-app-e2e:e2e

For running the Component-Tests against a Storybook-Instance, run
> nx run ui-lib-e2e:e2e

Both calls take care of starting their targets themselves.

#### Plan B

For users preferring scripts in package.json, you could also use scripts `app-e2e` for the classic e2e-Test against an application or `lib-e2e` for Component-Tests against Storybook

In webpack.config mind the include - all correct paths to sources that shall be instrumented/you want coverage for in this e2e-Project, have to be declared correctly.
If you want coverage for specs as well, remove corresponding entries from exclude.

## Changes needed in your NX-Setup

This repo essentially followed the instructions of <https://github.com/skylock/cypress-angular-coverage-example>, but will expand on the details that took me a while to figure out, necessary to have a successful setup.

### Skylock's Setup, with hints

- Install ngx-build-plus to extends the Angular CLI's build process and instrument the code. It enables adding an additional webpack-config which takes care of the instrumentation of the application when it is served.

```bash
npm i -D ngx-build-plus
```

- Add webpack coverage config file coverage.webpack.js to cypress folder (in this example, it's the app cov-app-e2e). In `include`, make sure all desired source-folders are listed, with correct paths relative to the webpack config.

```JavaScript
module.exports = {
  module: {
    rules: [
      {
        test: /\.(js|ts)$/,
        loader: 'istanbul-instrumenter-loader',
        options: { esModules: true },
        enforce: 'post',
        include: [
          require('path').join(__dirname, '..', 'cov-app/src'),
          require('path').join(__dirname, '../..', 'libs/ui-lib/src')
        ],
        exclude: [
          /\.(e2e|spec)\.ts$/,
          /node_modules/,
          /(ngfactory|ngstyle)\.js/
        ]
      }
    ]
  }
};

```

- Update angular.json to use ngx-build with extra config, it extends the previous configuration with the instrumentation step. In NX Setup, serve is called on test startup, so with this configuration both `ng serve` and `nx run cov-app` result in instrumented code.

```JSON
"serve": {
          "builder": "ngx-build-plus:dev-server",
          "options": {
            "browserTarget": "cypress-angular-coverage-example:build",
            "extraWebpackConfig": "./cypress/coverage.webpack.js"
          },
```

- Instrument JS files with istanbul-lib-instrument for subsequent code coverage reporting

```bash
npm i -D istanbul-instrumenter-loader
```

- Make Istanbul understand your Typescript source files

```bash
npm i -D @istanbuljs/nyc-config-typescript source-map-support ts-node
```

- Make sure that Istanbul takes advantage of it by adding this configuration in your package.json or in .nycrc.json, on the same level as e.g. `scripts`

```JSON
  "nyc": {
    "extends": "@istanbuljs/nyc-config-typescript",
    "all": true
  },
```

- Add cypress code coverage plugin

```bash
  npm install -D @cypress/code-coverage nyc istanbul-lib-coverage
```

- Then add the code below to your supportFile and pluginsFile

```JavaScript
// cypress/support/index.js
import '@cypress/code-coverage/support'
```

```JavaScript
// cypress/plugins/index.js
module.exports = (on, config) => {
  on('task', require('@cypress/code-coverage/task'))
}
```

### Summarized setup for a regular app, i.e. cov-app + cov-app-e2e

- Install dependencies

```bash
  npm i -D ngx-build-plus
  npm i -D istanbul-instrumenter-loader
  npm i -D @istanbuljs/nyc-config-typescript source-map-support ts-node
  npm install -D @cypress/code-coverage nyc istanbul-lib-coverage
```

- Provide additional webpack-config `coverage.webpack.js` in cov-app-e2e, make sure paths are all listed and correct

```JavaScript
module.exports = {
  module: {
    rules: [
      {
        test: /\.(js|ts)$/,
        loader: 'istanbul-instrumenter-loader',
        options: { esModules: true },
        enforce: 'post',
        include: [
          require('path').join(__dirname, '..', 'cov-app/src'),
          require('path').join(__dirname, '../..', 'libs/ui-lib/src')
        ],
        exclude: [
          /\.(e2e|spec)\.ts$/,
          /node_modules/,
          /(ngfactory|ngstyle)\.js/
        ]
      }
    ]
  }
};

```

- Change `angular.json` for cov-app

```JSON
"serve": {
          "builder": "ngx-build-plus:dev-server",
          "options": {
            "browserTarget": "cypress-angular-coverage-example:build",
            "extraWebpackConfig": "./cypress/coverage.webpack.js"
          },
```

- Add global config to `package.json` (same level as e.g. scripts)

```JSON
  "nyc": {
    "extends": "@istanbuljs/nyc-config-typescript",
    "all": true
  },
```

- Configure cypress-plugin in cov-app-e2e

```JavaScript
// cypress/support/index.js
import '@cypress/code-coverage/support'
```

```JavaScript
// cypress/plugins/index.js
module.exports = (on, config) => {
  on('task', require('@cypress/code-coverage/task'))
}
```

Coverage Report with Highlighting can be found after test execution in `/coverage/lcov-report/index.html`

### Configuration for e2e-Tests against Storybook

- Install dependencies, build-plus is (probably) not necessary as there's already a webpack-configuration we can modify towards our needs.

```bash
  npm i -D istanbul-instrumenter-loader
  npm i -D @istanbuljs/nyc-config-typescript source-map-support ts-node
  npm install -D @cypress/code-coverage nyc istanbul-lib-coverage
```

- Add instrumentation configuration into `webpack.config.js` in .storybook directory inside the tested library (here: ui-lib). As Storybook already makes use of Webpack, this step replaces the additional webpack-config and the alteration of the configuration in angular.json.

```JavaScript
const rootWebpackConfig = require('../../../.storybook/webpack.config');
// Export a function. Accept the base config as the only param.
module.exports = async ({ config, mode }) => {
  config = await rootWebpackConfig({ config, mode });
  config.module.rules.push({
    test: /\.(js|ts)$/,
    loader: 'istanbul-instrumenter-loader',
    options: { esModules: true },
    enforce: 'post',
    include: require('path').join(__dirname, '..', 'src')
  });
  // Return the altered config
  return config;
};

```

- Add global config to `package.json` (same level as e.g. scripts)

```JSON
  "nyc": {
    "extends": "@istanbuljs/nyc-config-typescript",
    "all": true
  },
```

- Configure cypress-plugin in ui-lib-e2e

```JavaScript
// cypress/support/index.js
import '@cypress/code-coverage/support'
```

```JavaScript
// cypress/plugins/index.js
module.exports = (on, config) => {
  on('task', require('@cypress/code-coverage/task'))
}
```

Coverage Report with Highlighting can be found after test execution in `/coverage/lcov-report/index.html`.

angular-nx-cypress-coverage-example

angular-nx-cypress-coverage-example 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

angular-nx-cypress-coverage-example

angular-nx-cypress-coverage-example 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README