ArduZ80

KO | EN

gitlite — search

#python #hacktoberfest #react #typescript #llm #golang #go #deep-learning #nodejs #windows #kubernetes #awesome-list #pytorch #security

(★ 47)

The first Z80 emulation library for Arduino

ArduZ80 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# ArduZ80

The first Z80 emulation library for Arduino, bringing back the old Z80 to life.

**Now Available on the Arduino LibraryManager & [Arduino Playground](http://playground.arduino.cc/Code/ArduZ80)**

# Introduction

Studying microprocessors for a semester project, I had to write an emulator, and I chose Z80 to be my study case. my project had to be in arduino, so the emulator itself must run on arduino, I searched the internet and no working project or library where found for Z80 to emulate it on arduino, I decided to write my own library and emulator system and revive the Z80 through Arduino, it was a great processor for hobbyists and students and very good to study computer architeture on it.

# Zilog Z80 
The Z80 microprocessor is an 8 bit CPU with a 16 bit address bus. 
It has a language of 252 root instructions and an additional 308
instructions. 
The Z80 was modeled after the 8080 and contains the 78 opcodes of
8080 opcodes as a subset to it's language. 
Programming features include an accumulator and six eight bit
registers that can be paired as Three 16 bit registers. 
In addition to the general registers, a stack-pointer, program-counter, and two
index (memory pointers) registers are provided.

# Features 
- Interpretation-Based.
- Written and optimized for Arduino. 
- Tested on Arduino Nano, Uno, Mega. 
- ALU, Buses, Registers, Control Unit emulated. 
- Emulates 260 Instructions (177 Basic Instructions, 83 Extended Instructions). 
- Implementation of IN and OUT instruction left for developer to customize his system. 
- built with customization and extensibility in mind, adding a new instruction takes 3 lines only.

# Usage

Step 1:

//Make an array to hold the program
    uint8_t t[30] = {
    
    EXT_FD, FD_LD_A_imm, 0x00,
    EXT_DD, DD_LD_B_imm, 0x09,
    EXT_DD, DD_LD_C_imm, 0x03,
    XOR_A_B, 
    XOR_A_C, 
    XOR_A_imm, 0xFF,
    NOP
    
    };
    
Step 2 :

//Copy the program to RAM 
 for (int i = 0; i < 30; i++) {

cpu.ram_[i] = t[i];
   
    }

Step 3 :

//Run the CPU 
    cpu.run_to_nop(true);

Step 4 (Optional) :

//Implement write_io and read_io 
    
    void ArduZ80::write_io(uint16_t addr, uint8_t val){ }

uint8_t ArduZ80::read_io(uint16_t addr){ return data; }
 
 
# Credits
- Sijmen Smulder for his C++ emulator, helped as a base for my Arduino version. 
- Gabriel Gambetta for his C library, helped to understand some instructions and tweak emulator.

# License

This library is signed under MIT License, Reproduce under it's terms.

ArduZ80

ArduZ80 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ArduZ80

ArduZ80 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README