EvilCrowRF_v2-el_Cheapo_version

KO | EN

gitlite — search

#react #ai #typescript #go #machine-learning #deep-learning #docker #nodejs #macos #windows #cli #kubernetes #awesome-list #open-source

EvilCrowRF_v2-el_Cheapo_version

(★ 31)

The DIY_EvilCrowRF_v2-el_Cheapo_version is a PCB that brings an option to experience radio frequency adventures from scratch.

EvilCrowRF_v2-el_Cheapo_version Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# DIY_EvilCrowRF_v2-el_Cheapo_version PCB

"The EvilCrowRF_v2" is a radio frequency device for pentesting and Red Team operations, this device operates in the following radiofrequency bands:

300Mhz-348Mhz
    387Mhz-464Mhz
    779Mhz-928Mhz

![ECRF-icon](https://github.com/user-attachments/assets/c1e1ef7d-43e0-48da-a2c6-e7290fa95330)

# The DIY_EvilCrowRF_v2-el_Cheapo_version is a PCB that brings all the awesome features from the original hardware with over-the-shelf parts, affordable and easy to build experience for a lot of fun and profit.

![ECRF-jeito-de-Microbio](https://github.com/user-attachments/assets/65c0696b-b137-4916-8f5d-ffbf1340451d) ![ECRF-jeito-de-Microbio_back](https://github.com/user-attachments/assets/f59e6205-acda-447a-8af6-b16c59ecfd91)

# Requirements:

1.- TI CC1101-v2 module which is currently the most available version everywhere (we need 2 modules).

(The CC1101_v2 has 8pins, blue color and with two circle-holes).

Like this one:

https://www.aliexpress.us/item/3256806241609769.html

2.- ESP32 DevKit_v1 This board has 30-Pins, and the chip ESP-WROOM-32 footprint.

See here:

https://www.aliexpress.us/item/3256801462536246.html

3.- MicroSDcard module (6 pin)

This one works:

https://www.aliexpress.us/item/3256805794981947.html

However, there is a gotcha. This module will be soldered in the back of the PCB.

The order of the pins has to be from left to right:

CS, SCK, MOSI, MISO, VCC, GND.

In the case of this MicroSDcard module, the headers need to be desoldered.

New headers need to be soldered from the oposite side of the module.

For reference see picture below.

4.- The PCB for this easy to build device DIY_EvilCrowRF_v2-el_Cheapo_version.

Download the ZIP file from the release section of this page and sent it to print to your favorite PCB manufacturer.

5.- 2x tactile push buttons (for instance 6x6x6), 2x 10k resistors, a switch, Iron, solder, flux, headers, etc.

6.- A MicroSDcard

Any MicroSdcard (no bigger that 32 GB) should work.

7.- There is the need for a battery to provide 5 volts to "el-Cheapo" through the entry labeled "5V-IN".

An alternative option could be sacrifying an USB cable and solder the Positive and Ground ends to the board and plug it to some small powerbank.

Note:

Powering the device through the ESP32 USB port will not provide power to the CC1101 modules or the SDcard. Therefore, el Cheapo will not work.

# The result:

Putting things together the device will look like this one:

Btw, the photo quality on these pics don't really show the beauty of the final build. But, whatever.

![Cheapo-front-1](https://github.com/user-attachments/assets/d541bb76-af29-45c7-80c0-423b46bc68c6) ![Cheapo-1](https://github.com/user-attachments/assets/aa6f9d0d-b4c9-45b7-adb8-74291d0009ab)

Now that the device is ready, get the firmware and go outside to play.

Please use this device responsibly.

# There are several firmware options to use this hardware:

1.- The original project, go to their page and follow the directions.

https://github.com/joelsernamoreno/EvilCrowRF-V2

2.- Another option is the alternate firmware from h-RAT.

https://github.com/h-RAT/EvilCrowRF_Custom_Firmware_CC1101_FlipperZero

3.- A special mention on DoobTheGoober's firmware

https://github.com/CharlesTheGreat77/EvilCrowPyRF

4.- If you are masochist there is one complex option, but at the same time powerful and rewarding.

https://github.com/rfquack/RFQuack

# LICENSE

Distributed under the MIT License. See the MIT LICENSE file for more information. This tool/device is for educational purpose only and the author does not condone any illegal use. Use as your own risk.

EvilCrowRF_v2-el_Cheapo_version

EvilCrowRF_v2-el_Cheapo_version Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

EvilCrowRF_v2-el_Cheapo_version

EvilCrowRF_v2-el_Cheapo_version Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README