quadruped-reactive-walking

KO | EN

gitlite — search

#javascript #python #hacktoberfest #typescript #llm #go #golang #macos #java #awesome #kubernetes #pytorch #mcp #openai

quadruped-reactive-walking

(★ 8)

No description available.

quadruped-reactive-walking 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# qrw

Implementation of a reactive walking controller for quadruped robots. Architecture mainly in Python with some parts in C++ with bindings to Python.

# Dependencies

* Install a Python 3 version (for instance Python 3.6)

* For the following installations each time you see something like "py36", replace it by your Python version ("py35" for instance)

* Install Pinocchio: https://stack-of-tasks.github.io/pinocchio/download.html

* Install Gepetto Viewer: `sudo apt install robotpkg-py36-qt4-gepetto-viewer-corba`

* Install robot data: `sudo apt install robotpkg-example-robot-data`

* Install Scipy, Numpy, Matplotlib, IPython: `python3.6 -m pip install --user numpy scipy matplotlib ipython`

* Install PyBullet: `pip3 install --user pybullet`

* Install OSQP solver: [https://osqp.org/docs/get_started/sources.html#build-the-binaries]
    * git clone --recursive https://github.com/oxfordcontrol/osqp
    * cd osqp
    * Edit CMakeLists.txt 
    * Add `set(PRINTING OFF)` just above `message(STATUS "Printing is ${PRINTING}")`
    * Add `set(PROFILING OFF)` just above `message(STATUS "Profiling is ${PROFILING}")`
    * Turn DLONG off `option (DLONG "Use long integers (64bit) for indexing" OFF)`
    * mkdir build
    * cd build
    * cmake .. -DCMAKE_BUILD_TYPE=RELEASE -DCMAKE_INSTALL_PREFIX=~/install -DPYTHON_EXECUTABLE=$(which python3.6) -DPYTHON_STANDARD_LAYOUT=ON (to install in ~/install folder)
    * make install

* Install YAML parser for C++: [https://github.com/jbeder/yaml-cpp]

* Install package that handles the gamepad: `pip3 install --user inputs`

* Install eiquadprog: `sudo apt install robotpkg-eiquadprog`

* Install TSID: [https://github.com/stack-of-tasks/tsid#installation] You can put the repo in another folder if you want, like `cd ~/install/` instead of `cd $DEVEL/openrobots/src/` for the first line.

* Clone interface repository: in `/scripts`, `git clone https://github.com/paLeziart/solopython`

# Compiling the C++ parts

* Initialize the cmake submodule: `git submodule init`

* Update the cmake submodule: `git submodule udpdate`

* Create a build folder: `mkdir build`

* Get inside and cmake: `cd build` then `cmake .. -DCMAKE_BUILD_TYPE=RELEASE -DCMAKE_INSTALL_PREFIX=~/install -DPYTHON_EXECUTABLE=$(which python3.6) -DPYTHON_STANDARD_LAYOUT=ON`

* Compile Python bindings: `make`

* Copy them to the script folder so that the scripts can access the compiled code: `cp python/quadruped_reactive_walking/libquadruped_reactive_walking.so ../scripts/`

# Run the simulation

* Run `python3.6 main_solo12_control.py -i test` while being in the `scripts` folder

* Sometimes the parallel process that runs the MPC does not end properly so it will keep running in the background forever, you can manually end all python processes with `pkill -9 python3`

# Tune the simulation

* In `main_solo12_control.py`, you can change some of the parameters defined at the beginning of the `control_loop` function.

* Set `envID` to 1 to load obstacles and stairs.

* Set `use_flat_plane` to False to load a ground with lots of small bumps.

* If you have a gamepad you can control the robot with two joysticks by turning `predefined_vel` to False in `main_solo12_control.py`. Velocity limits with the joystick are defined in `Joystick.py` by `self.VxScale` (maximul lateral velocity), `self.VyScale` (maximum forward velocity) and `self.vYawScale` (maximum yaw velocity).

* If `predefined_vel = True` the robot follows the reference velocity pattern velID. Velocity patterns are defined in `Joystick.py`, you can modify them or add new ones. Each profile defines forward, lateral and yaw velocities that should be reached at the associated loop iterations (in `self.k_switch`). There is an automatic interpolation between milestones to have a smooth reference velocity command.

* You can define a new gait in `src/Planner.cpp` using `create_trot` or `create_walk` as models. Create a new function (like `create_bounding` for a bounding gait) and call it inside the Planner constructor before `create_gait_f()`.

* You can modify the swinging feet apex height in `include/quadruped-reactive-control/Planner.hpp` with `maxHeight_` or the lock time before touchdown with `lockTime_` (to lock the target location on the ground before touchdown).

* For the MPC QP problem you can tune weights of the Q and P matrices in the `create_weight_matrices` function of `src/MPC.cpp`.

* Remember that if you modify C++ code you need to recompile the library.

quadruped-reactive-walking

quadruped-reactive-walking 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

quadruped-reactive-walking

quadruped-reactive-walking 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README