pololu-rpi-slave-arduino-library

KO | EN

gitlite — search

#hacktoberfest #ai #llm #go #machine-learning #rust #linux #java #windows #kubernetes #awesome-list #pytorch #security #open-source

pololu-rpi-slave-arduino-library

(★ 30)

An Arduino library that helps establish I2C communication between an A-Star 32U4 Robot Controller and a Raspberry Pi, with the Arduino acting as the I2C slave.

pololu-rpi-slave-arduino-library 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Raspberry Pi slave library for Arduino

Version: 2.0.0 
Release date: 2017 March 31 
[www.pololu.com](https://www.pololu.com/)

Summary
-------

This is an Arduino library that helps establish I2C communication with
a Raspberry Pi, with the Arduino acting as the I2C slave. It should
work with most Arduino-compatible boards, but we designed it for use
with these Pololu products:

* [A-Star 32U4 Robot Controller LV](https://www.pololu.com/product/3117) or [SV](https://www.pololu.com/product/3119)
* [Romi 32U4 Control Board](https://www.pololu.com/product/3544)

These boards are designed to connect conveniently to the Pi's GPIO header.  The
idea is that the Raspberry Pi can take care of high-level tasks like video
processing or network communication, while the AVR microcontroller takes care of
actuator control, sensor inputs, and other low-level tasks that the Pi is
incapable of.

There are a few reasons we made a library for this instead of
just recommending the standard Arduino I2C library, Wire.h:

* Wire.h just gives you access to raw I2C packets; you have to decide
 how they should relate to your data, and that's not trivial. This
 library implements a specific protocol allowing bidirectional access
 to a buffer, with atomic reads and writes.
* The processor on the Raspberry Pi has
 [a major bug](http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html)
 that corrupts data except at very low speeds. The standard Arduino
 I2C library, Wire.h, is not flexible enough to allow us to follow
 the suggested workarounds (delays inserted at key points).

We have included example Arduino code for the A-Star or Romi and Python code
for the Raspberry Pi.  Together, the examples set up a web server on
the Raspberry Pi that will let you remotely control and monitor a
robot from your smartphone or computer.

Getting started
---------------

See [this blog post](https://www.pololu.com/blog/577/building-a-raspberry-pi-robot-with-the-a-star-32u4-robot-controller)
for a complete tutorial including step-by-step build instructions for
an example robot.

Benchmarking
------------

The included script `benchmark.py` times reads and writes of 8 bytes,
to give you an idea of how quickly data can be transferred between the
devices. Because of a limitation in the AVR's I2C module,
we have slowed down reads significantly.

| Bus speed | Reads     | Writes     |
| --------- | --------- | ---------- |
| 100 kHz   | 21 kbit/s | 53 kbit/s  |
| 400 kHz   | 43 kbit/s | 140 kbit/s |

Version history
---------------

* 2.0.0 (2017 Mar 31): Added support for encoder counts and slave sketch for the Romi 32U4 robot. Updated Raspberry Pi scripts to use Python 3 instead of Python 2.
* 1.0.1 (2017 Jan 23): Added and adjusted delays necessary for reliable operation on the Pi 3.
* 1.0.0 (2016 Feb 16): Original release.

pololu-rpi-slave-arduino-library

pololu-rpi-slave-arduino-library 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

pololu-rpi-slave-arduino-library

pololu-rpi-slave-arduino-library 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README