iridium-toolkit
A set of tools to parse Iridium frames
파일 탐색기
최종 버전 다운로드 (.zip)- irc-notify.yml
- 9601-sim.py
- tpi.py
- .gitignore
- asm2c.pl
- get_binary.sh
- Makefile
- mk_objdump.sh
- Readme.md
- tms320c54x.c
- IDA-GSM.txt
- iridium_frame_structure.odg
- iridium_frame_structure.pdf
- iridium_frame_structure.svg
- epochseconds.c
- view_baudline
- view_raw
- complex_sync_search.py
- cut_and_downmix.py
- cut_demod_2pass.py
- cut_sample
- demod.py
- detector.py
- extractor.py
- filters.py
- iq.py
- iridium.py
- README.md
- runner.rtl-tcp
- runner.uhd
- .gitignore
- example.sh
- favicon.ico
- map.html
- mtheatmap.html
- mtmap.html
- __init__.py
- base.py
- burst.py
- id_sat_map.py
- ida.py
- ira.py
- iratime.py
- itl.py
- livemap.py
- msg.py
- mtpos.py
- pktstats.py
- ppm.py
- sbd.py
- sbd_nal.py
- snr.py
- stats.py
- stats_iri.py
- tdoa.py
- time.py
- config.py
- nal-shout-v6-decoder.py
- rtl-mixer.py
- rtl-peak-hold.py
- rtl-sdr-decimator.grc
- rtl-sdr-decimator.py
- rtl-tcp-converter.py
- .gitignore
- Makefile
- mkmodule.pl
- test_parser.py
- KEEP
- .gitignore
- predict.py
- satfind3.py
- satplot.py
- sats.py
- tle-plot.py
- update-tracking
- bch-generate.py
- bitutils.py
- README.md
- rx-stats-freq-hist.py
- rx-stats-len-hist.py
- rx-stats.py
- .gitignore
- bch.py
- beam-plotter.py
- beam-reception-plotter.py
- bits_to_dfs.py
- bitsparser.py
- check-sample
- check-sample-vod
- data.vimrc
- fec.py
- FORMAT.md
- ibc_position_interpolator.py
- interp_circ.py
- iridium-acars-to-airframes.py
- iridium-parser.py
- iridium.txt
- itl.py
- libacars.py
- locations.ini.example
- locations.py
- locator.py
- meta-manager
- mkkml
- play-iridium-ambe
- play-iridium-vod
- pseudoranging.py
- README.md
- reassembler.py
- reedsolo.py
- reedsolo6.py
- rs.py
- rs6.py
- stats-parsed
- stats-voc.py
- stats.py
- util.py
- voc-cluster.py
- vod-cluster.py
- vod-stitcher.py
# 설치 가이드
1. 코드 내려받기
git clone https://github.com/muccc/iridium-toolkit
깃허브에서 프로젝트 코드 전체를 내 컴퓨터로 내려받습니다.
cd iridium-toolkit
방금 내려받은 프로젝트 폴더 안으로 이동합니다.
2. Make
보통 추천사전 준비물
- Git GitHub에서 프로젝트 코드를 내려받으려면 필요합니다.
- Make Linux/macOS는 보통 기본 설치되어 있습니다. Windows는 별도 설치(예: MSYS2, WSL)가 필요합니다.
cd ambe_emu
이 프로젝트의 관련 파일이 하위 폴더 안에 있어서, 먼저 그 폴더로 이동합니다.
make
생성된 빌드 설정을 바탕으로 실제 컴파일을 진행해 실행 파일을 만듭니다.
에러 없이 끝나면 성공입니다. 생성된 실행 파일을 직접 실행해보세요.
// repository documentation
Was this content helpful?
(0 ratings)
