preHAZOP

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 18)

Automated Safety Assesments in an early development stage based on standardized DEXPI P&IDs and DWSIM process simulation.

preHAZOP Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# preHAZOP
Automated Safety Assesments in an early development Stage based on standardized DEXPI P&IDs [^1] and DWSIM process simulation exports [^2].

## Authors:
<figure role="group">
 <img src="./figures/TUDO_AD_logo.png" alt="SelfHTML-Logo" width=300>
</figure>
Jonas Oeing, Tim Holtermann 
TU Dortmund University, [Laboratory of Equipment Design](https://ad.bci.tu-dortmund.de/cms/en/laboratory/)

## Install:
The preHAZOP application is available as python application.

### Python installation:
1. Install Python (anaconda) from https://www.anaconda.com/products/individual 
2. Load the following python libraries
	- [NetworkX](https://networkx.org/) (vers. 2.6.3) [^3] 
	- [Matplotlib](https://matplotlib.org/) (vers. 3.4.3) [^4] 
	- [Pandas](https://pandas.pydata.org/) (vers. 1.3.4) [^5] 
	- [NLTK](https://www.nltk.org/) (vers. 3.6.5) [^6] 
	- [PySimpleGUI](https://pysimplegui.readthedocs.io/en/latest/) (vers. 4.60.0) [^7] 
	- [lxml](https://lxml.de/) (vers. 4.5.2) [^8] 
	- [openpyxl](https://openpyxl.readthedocs.io/en/stable/) (vers. 3.0.9) [^9]

3. Open the folder *preHAZOP_Application*.
4. Running the script *preHAZOP-ad@TUDO.py* starts the preHAZOP tool.

## Manual:
1. The preHAZOP tool consists of an Graphical User Interface for an easy application. 
<figure role="group">
 <img src="./figures/preHAZOP_GUI.png" alt="SelfHTML-Logo" width=350>
 <figcaption>
 Figure 1. GUI of the preHAZOP tool.
 </figcaption>
</figure>

2. Load the DEXPI-P&ID as well as the DWSIM simulation export into via the *BROWSE* buttons. 
3. Push the button *START*. The preHAZOP is running until its finish by showing the message *Run was successful! Results in Output.* 
4. The results (HAZOP-table) are stored into the folder *./Output*. Additionally you find a file *range_check_results.txt*, 
which shows the results of an inconsistency check in design pressure and temperatures.

## preHAZOP - Functionalitiy

Idea of the preHAZOP:

### preHAZOP-scenario detection

The preHAZOP is able to detect the following HAZOP-scenarios automatically in an graph based P&ID (DEXPI). If necessary, the user can add more scenarios by extending the [preHAZOP-database](./preHAZOP_Application/Data_storage.xlsx) using the predefined drop-down menu.

<table>
 <tr>
 <th>Index</th>
 <th width=600>Description</th>
 <th>Guideword</th>
 <th>Parameter</th>
 <th>Cause</th>
 <th>Consequence</th>
 <th>Safeguard_1</th>
 <th>Safeguard_2</th>
 <th>Affected Equipment</th>
 <th>Propability</th>
 <th>Requirements</th>
 <th>Equipment_1</th>
 <th>Specification_1.1</th>
 <th>Specification_1.2</th>
 <th>Equipment_2</th>
 <th>Specification_2.1</th>
 <th>Specification_2.2</th>
 <th>Equipment_3</th>
 <th>Specification_3.1</th>
 <th>Specification_3.2</th>
 </tr>
 <tr>
 <td>1</td>
 <td>Pump effects vacuum cause of inert failure, resulting in vessel demolition</td>
 <td>Lower</td>
 <td>Pressure</td>
 <td>Inert system failure</td>
 <td>Damage</td>
 <td>Pressure Low Shut down</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td>Check min. operation pressure of vessel</td>
 <td>Vessel</td>
 <td>Inert</td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>2</td>
 <td>Pumping against wrongly closed valve results in damage of pump</td>
 <td>Higher</td>
 <td>Temperature</td>
 <td>Valve wrongly closed</td>
 <td>Damage</td>
 <td>Bypass</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td>Valves (operation)</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>3</td>
 <td>Pumping against closed level control valve results in damage of pump</td>
 <td>Higher</td>
 <td>Temperature</td>
 <td>Valve closed by control</td>
 <td>Damage</td>
 <td>Bypass</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Column</td>
 <td>Level Control</td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td>Valves (operation)</td>
 <td>Level Control</td>
 <td></td>
 </tr>
 <tr>
 <td>4</td>
 <td>Substance leaks out of pump cause of mechanical seal wear</td>
 <td>Other</td>
 <td>Flow</td>
 <td>Mechanical seal wear</td>
 <td>Seal leakage</td>
 <td>Maintenance</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>5</td>
 <td>Mechanical failure of the pump</td>
 <td>No</td>
 <td>Rotation</td>
 <td>Mechanical failure</td>
 <td>Damage</td>
 <td>Maintenance</td>
 <td>Redundant</td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>6</td>
 <td>Mechanical failure of the centrifuge</td>
 <td>No</td>
 <td>Rotation</td>
 <td>Mechanical failure</td>
 <td>Damage</td>
 <td>Maintenance</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td></td>
 <td>Centrifuge</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>7</td>
 <td>Stirrer damages vessel</td>
 <td>Other</td>
 <td>Rotation</td>
 <td>Mechanical failure</td>
 <td>Damage</td>
 <td>Maintenance</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F2</td>
 <td></td>
 <td>Vessel</td>
 <td>Agitator</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>8</td>
 <td>Cooling circiut failure leads to a higher inlet temperature, resulting in a seal leakage of vessel</td>
 <td>Higher</td>
 <td>Temperature</td>
 <td>Cooling circuit fails</td>
 <td>Seal Leakage</td>
 <td>Inlet Temperature High Alarm</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td>Compare max. operation temperature of vessel with inlet temperature</td>
 <td>Cooler</td>
 <td></td>
 <td></td>
 <td>Vessel</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>9</td>
 <td>Too much heating leads to a higher inlet temperature, resulting in a seal leakage of vessel</td>
 <td>Higher</td>
 <td>Temperature</td>
 <td>Too much heating</td>
 <td>Seal Leakage</td>
 <td>Inlet Temperature High Alarm</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F1</td>
 <td>Compare max. reachable temperature with max. operation temperature of vessel</td>
 <td>Heater</td>
 <td></td>
 <td></td>
 <td>Vessel</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>10</td>
 <td>Pump is turned on when there is no medium in vessel, so it runs dry</td>
 <td>No</td>
 <td>Flow</td>
 <td>Wrongly turned on</td>
 <td>Damage</td>
 <td>Level Low Alarm</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Vessel</td>
 <td></td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>11</td>
 <td>Pump is turned on when there is no medium in Column, so it runs dry</td>
 <td>No</td>
 <td>Flow</td>
 <td>Wrongly turned on</td>
 <td>Damage</td>
 <td>Level Low Alarm</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Column</td>
 <td></td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>12</td>
 <td>Level Control failure leads to an empty vessel, so pump runs dry</td>
 <td>No</td>
 <td>Flow</td>
 <td>Control failure</td>
 <td>Damage</td>
 <td>Level Low Alarm</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Vessel</td>
 <td>Level Control</td>
 <td></td>
 <td>Pump</td>
 <td>Level Control</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>13</td>
 <td>Level Control failure leads to an empty column, so pump runs dry</td>
 <td>No</td>
 <td>Flow</td>
 <td>Control failure</td>
 <td>Damage</td>
 <td>Level Low Alarm</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Column</td>
 <td>Level Control</td>
 <td></td>
 <td>Pump</td>
 <td>Level Control</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>14</td>
 <td>Pump runs dry cause of a wrongly closed valve in front</td>
 <td>No</td>
 <td>Flow</td>
 <td>Wrongly closed valve</td>
 <td>Damage</td>
 <td>Temperature High Shut down</td>
 <td></td>
 <td>Equipment_2</td>
 <td>F1</td>
 <td></td>
 <td>Valves (operation)</td>
 <td></td>
 <td></td>
 <td>Pump</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
 <tr>
 <td>15</td>
 <td>An external fire effects a vessel rupture</td>
 <td>Higher</td>
 <td>Pressure</td>
 <td>External fire</td>
 <td>Rupture</td>
 <td>Safety valve</td>
 <td></td>
 <td>Equipment_1</td>
 <td>F3</td>
 <td>Check content and max. operation pressure</td>
 <td>Vessel</td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 <td></td>
 </tr>
</table>

### Consistency checks (pressure/temperature)

## Examples
The folder *./preHAZOP_Application/Input* containts example file for an distillation process of Ethanol/Water.

- Vizualization of the [example DEXPI-P&ID](./preHAZOP_Application/Input/DEXPI_Distillation.xml)[^10]:
<figure role="group">
 <img src="./figures/PID_distillation.png" alt="SelfHTML-Logo" width=700>
 <figcaption>
 Figure 2. P&ID of a textbook distillation plant example.
 </figcaption>
</figure>

- Vizualisation of the [example simulation](./preHAZOP_Application/Input/Simulation_Distillation.xml)[^10]:
<figure role="group">
 <img src="./figures/Simulation_distillation.png" alt="SelfHTML-Logo" width=700>
 <figcaption>
 Figure 3. Simulation of a textbook distillation plant example for ethanol/water.
 </figcaption>
</figure>

### References:
[^1]: DEXPI Initiative, DEXPI Specification 1.3, https://dexpi.org/, accessed on 07-28-2022 
[^2]: DWSIM process simulator, https://dwsim.org/, accessed on 07-28-2022 
[^3]: NetworkX developers, online documentation, https://networkx.org/, accessed on 07-27-2022 
[^4]: Matplotlib development team, online documentation, https://matplotlib.org/, accessed on 07-28-2022 
[^5]: Pandas development team, online documentation, https://pandas.pydata.org/, accessed on 07-28-2022 
[^6]: NLTK project, online documentation, https://www.nltk.org/, accessed on 07-28-2022 
[^7]: PySimpleGUI, online documentation, https://pysimplegui.readthedocs.io/en/latest/, accessed on 07-28-2022 
[^8]: lxml development team, online documentation, https://lxml.de/, accessed on 07-28-2022 
[^9]: Charlie Clark, online documentation, https://openpyxl.readthedocs.io/en/stable/, accessed on 07-28-2022 
[^10]: A. Behr, D. W. Agar et al., Einfuehrung in die Technische Chemie, Springer Spektrum, 2016

preHAZOP

preHAZOP Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

preHAZOP

preHAZOP Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README