ReLERNN

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

(★ 70)

Recombination Landscape Estimation using Recurrent Neural Networks

ReLERNN 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# *ReLERNN*
## *Recombination Landscape Estimation using Recurrent Neural Networks*
====================================================================

ReLERNN uses deep learning to infer the genome-wide landscape of recombination from as few as four individually sequenced chromosomes, or from allele frequencies inferred by pooled sequencing.
This repository contains the code and instructions required to run ReLERNN, and includes example files to ensure everything is working properly. The manuscript detailing ReLERNN can be found [here](https://academic.oup.com/mbe/advance-article/doi/10.1093/molbev/msaa038/5741419).

## Recommended installation on linux

ReLERNN requires a CUDA-enabled NVIDIA GPU, Python 3.10+, and TensorFlow 2.18+.

[pixi](https://pixi.sh) handles Python, CUDA, and all dependencies in one step:

```bash
$ git clone https://github.com/kr-colab/ReLERNN.git
$ cd ReLERNN
$ pixi install
```

This creates an environment with GPU support by default. If you are using on an HPC cluster, you might need to set the CUDA override before installing. Do this by running `export CONDA_OVERRIDE_CUDA=12.8` before `pixi install` (replace 12.8 with your CUDA version).

For CPU-only use:

```bash
$ pixi install -e cpu
```

To use ReLERNN, either activate the environment or prefix commands with `pixi run`:

```bash
# Option 1: activate the environment, then run commands directly
$ pixi shell
$ ReLERNN_SIMULATE --vcf input.vcf --genome genome.bed --projectDir ./output/ ...

# Option 2: prefix each command with pixi run
$ pixi run ReLERNN_SIMULATE --vcf input.vcf --genome genome.bed --projectDir ./output/ ...
```

All examples below show bare commands and assume an activated environment.

## Testing ReLERNN
An example VCF file (5 contigs; 10 haploid chromosomes) and a shell script for running ReLERNN's four modules is located in `$/ReLERNN/examples`.
To test the functionality of ReLERNN simply use the following commands:

```bash
$ pixi run example
```

Provided everything worked as planned, `$ReLERNN/examples/example_output/` should be populated with a few directories along with the files: `example.PREDICT.txt` and `example.PREDICT.BSCORRECT.txt`.
The latter is the finalized output file with your recombination rate predictions and estimates of uncertainty.

The above example took 57 seconds to complete on a Xeon machine using four CPUs and one NVIDIA 2070 GPU.
Note that the parameters used for this example were designed only to test the success of the installation, not to make accurate predictions.
Please use the guidelines below for the best results when analyzing real data.

You can now test the functionality of ReLERNN for use with pool-seq data by using the following commands:

```bash
$ pixi run example-pool
```

## Estimating a recombination landscape from individually sequenced chromosomes

The ReLERNN pipeline is executed using four commands: `ReLERNN_SIMULATE`, `ReLERNN_TRAIN`, `ReLERNN_PREDICT`, and the optional `ReLERNN_BSCORRECT` (see the [Method flow diagram](./methodFlow.png)).

### Before running ReLERNN
ReLERNN takes as input a VCF file of biallelic variants. Users should use appropriate QC techniques (filtering low-quality variants, etc.) and remove non-biallelic variants before running ReLERNN. Small contigs (<< 250 SNPs) should not be included in the genome file `--genome`, though these do not need to be removed from the VCF. 
ReLERNN also requires that the number of sampled chromosomes is identical across all contigs, and VCFs should be filtered accordingly. Hemizygous chromosomes or haploid samples in an otherwise diploid dataset 
should ideally be run separately using a separate VCF. It is possible to treat hemizygous chromosomes as "diploids with missing data" using the `--forceDiploid` option, however this is not recommended. 
It is now possible to run ReLERNN on VCFs with missing genotypes (coded as a `.`).

If you want to make predictions based on equilibrium simulations, you can skip ahead to executing `ReLERNN_SIMULATE`.
While ReLERNN is generally robust to demographic model misspecification, prediction accuracy may potentially be improved by simulating the training set under a demographic history that accurately matches that of your sample. ReLERNN optionally takes the output files from three popular demographic history inference programs ([stairwayplot_v1](https://sites.google.com/site/jpopgen/stairway-plot), [SMC++](https://github.com/popgenmethods/smcpp), and [MSMC](https://github.com/stschiff/msmc)), and simulates a training set under these histories. Note: for SMC++ use the .csv output (option -c in SMC++). It is up to the user to perform the proper due diligence to ensure that the population size histories reported by these programs are sound. In our opinion, unless you know exactly how these programs work and you expect your data to represent a history dramatically different from equilibrium, you are better off skipping this step and training ReLERNN on equilibrium simulations. Once you have run one of the demographic history inference programs listed above, you simply provide the raw output file from that program to ReLERNN_SIMULATE using the `--demographicHistory` option.

### Step 1) ReLERNN_SIMULATE
`ReLERNN_SIMULATE` reads your VCF file and splits it by chromosome. The chromosomes to be evaluated must be specified by providing a BED file of said positions using the `--genome` argument. A BED-formatted accessibility mask (with non-overlapping ascending windows) may be optionally provided using the `--mask` option. Use the `--phased` or `--unphased` flag to train using phased or unphased genotypes (the default is unphased). It is required that the VCF file use the extension `.vcf`. The prefix of that file will serve as the prefix used for all output files (e.g. running ReLERNN on the file `population7.vcf` will generate the result file `population7.PREDICT.txt`). It is strongly recommended that you use the default setting for `--maxWinSize`, larger values can cause training to fail and smaller values can result in lower accuracy. Users are required to provide an estimate of the per-base mutation rate for your sample, along with an estimate for generation time (in years). If you previously ran one of the demographic history inference programs listed above, just use the same values that you used for them. This is also where you will point to the output from said program, using `--demographicHistory`. If you are not simulating under an inferred history, simply do not include this option. Importantly, you can also set a value for the maximum recombination rate to be simulated using `--upperRhoThetaRatio`. If you have an a priori estimate for an upper bound to the ratio of rho to theta go ahead and set this here. Keep in mind that higher values will dramatically slow the coalescent simulations. We recommend using the default number of train/test/validation simulation examples, but if you want to simulate more examples, go right ahead. `ReLERNN_SIMULATE` then uses msprime to simulate 100k training examples and 1k validation and test examples. All output files will be generated in subdirectories within the path provided to `--projectDir`. It is required that you use the same projectDir for all four ReLERNN commands. If you want to run ReLERNN of multiple populations/taxa, you can run them independently using a unique projectDir for each. This step is simulation heavy and runtimes will strongly depend on the inferred population size.

The complete list of arguments used in `ReLERNN_SIMULATE` is found below:
```
ReLERNN_SIMULATE -h

usage: ReLERNN_SIMULATE [-h] [-v VCF] [-g GENOME] [-m MASK] [-d OUTDIR]
                        [-n DEM] [-u MU] [-l GENTIME] [-r UPRTR] [-t NCPU] [-s SEED]
                        [--phased] [--unphased] [--forceDiploid] [--phaseError PHASEERROR]
                        [--maxWinSize WINSIZEMX] [--maskThresh MASKTHRESH]
                        [--nTrain NTRAIN] [--nVali NVALI] [--nTest NTEST]

optional arguments:
  -h, --help            show this help message and exit
  -v VCF, --vcf VCF     Filtered and QC-checked VCF file. Important: Every row
                        must correspond to a biallelic SNP with no missing
                        data!
  -g GENOME, --genome GENOME
                        BED-formatted (i.e. zero-based) file corresponding to
                        chromosomes and positions to consider
  -m MASK, --mask MASK  BED-formatted file corresponding to inaccessible bases
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  -n DEM, --demographicHistory DEM
                        Output file from either stairwayplot, SMC++, or MSMC
  -u MU, --assumedMu MU
                        Assumed per-base mutation rate
  -l GENTIME, --assumedGenTime GENTIME
                        Assumed generation time (in years)
  -r UPRTR, --upperRhoThetaRatio UPRTR
                        Assumed upper bound for the ratio of rho to theta
  -t NCPU, --nCPU NCPU  Number of CPUs to use (defaults to total available cores)
  -s SEED, --seed SEED  Random seed
  --phased              VCF file is phased
  --unphased            VCF file is unphased
  --forceDiploid        Treats all samples as diploids
                        with missing data (bad idea; see README)
  --phaseError PHASEERROR
                        Fraction of bases simulated with incorrect phasing
  --maxWinSize WINSIZEMX
                        Max number of sites per window to train on. Important:
                        too many sites causes problems in training
  --maskThresh MASKTHRESH
                        Discard windows where >= maskThresh percent of sites
                        are inaccessible
  --nTrain NTRAIN       Number of training examples to simulate
  --nVali NVALI         Number of validation examples to simulate
  --nTest NTEST         Number of test examples to simulate
```

### Step 2) ReLERNN_TRAIN
`ReLERNN_TRAIN` takes the simulations created by `ReLERNN_SIMULATE` and uses them to train a recurrent neural network. Again, we recommend using the defaults for `--nEpochs` and `--nValSteps`, but if you would like to do more training, feel free. To set the GPU to be used for machines with multiple dedicated GPUs use `--gpuID` (e.g. if running an analysis on two populations simultaneously, set `--gpuID 0` for the first population and `--gpuID 1` for the second). `ReLERNN_TRAIN` outputs some basic metrics of the training results for you, generating the figure `$/projectDir/networks/vcfprefix.pdf`. The default value of `-nCPU` is 1 for this step, as this is often produces the shortest training times per epoch (depending on missing data and the mask). Feel free to test training times using multiple cores, and set `-nCPU` to whatever works best for your data/machine.

The complete list of arguments used in `ReLERNN_TRAIN` is found below:
```
ReLERNN_TRAIN -h

usage: ReLERNN_TRAIN [-h] [-d OUTDIR] [--nEpochs NEPOCHS]
                     [-t NCPU] [-s SEED]
                     [--nValSteps NVALSTEPS] [--gpuID GPUID]

optional arguments:
  -h, --help            show this help message and exit
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  -t NCPU, --nCPU NCPU  Number of CPUs to use (defaults to 1)
  -s SEED, --seed SEED  Random seed
  --nEpochs NEPOCHS     Number of epochs to train over
  --nValSteps NVALSTEPS
                        Number of validation steps
  --gpuID GPUID         Identifier specifying which GPU to use
```

### Step 3) ReLERNN_PREDICT
`ReLERNN_PREDICT` now takes the same VCF file you used in `ReLERNN_SIMULATE` and predicts per-base recombination rates in non-overlapping windows across the genome. The output file of predictions will be created as `$/projectDir/vcfprefix.PREDICT.txt`. It is important to note that the window size used for predictions might be different for different chromosomes. A complete list of the window sizes used for each chromosome can be found in third column of `$/projectDir/networks/windowSizes.txt`. Use the optional `--minSites` argument to exclude windows with fewer than the desired number of SNPs. If you are not interested in estimating confidence intervals around the predictions, your ReLERNN analysis is now finished. If you are getting OOM errors at this step you can try setting `--batchSizeOverride` to a value significantly less than the total number of windows along a chromosome (found in the last column of `$/projectDir/networks/windowSizes.txt`).

The complete list of arguments used in `ReLERNN_PREDICT` is found below:
```
ReLERNN_PREDICT -h

usage: ReLERNN_PREDICT [-h] [-v VCF] [-d OUTDIR] [--minSites MINS]
                       [--gpuID GPUID] [--batchSizeOverride BSO] [-s SEED]

optional arguments:
  -h, --help            show this help message and exit
  -v VCF, --vcf VCF     Filtered and QC-checked VCF file. Important: Every row
                        must correspond to a biallelic SNP with no missing
                        data!
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  --phased              VCF file is phased
  --unphased            VCF file is unphased
  --minSites MINS       Minimum number of SNPs in a genomic window required to
                        return a prediction
  --gpuID GPUID         Identifier specifying which GPU to use
  --batchSizeOverride BSO
                        Batch size to use for low memory applications
  -s SEED, --seed SEED  Random seed

```

### Optional Step 4) ReLERNN_BSCORRECT
However, you might want to have an idea of the uncertainty around your predictions. This is where `ReLERNN_BSCORRECT` comes in. `ReLERNN_BSCORRECT` generates 95% confidence intervals around each prediction, and additionally attempts to correct for systematic bias ([see Materials and Methods](https://www.biorxiv.org/content/biorxiv/early/2019/08/16/662247.full.pdf)). It does this by simulated a set of `--nReps` examples at each of `nSlice` recombination rate bins. It then uses the network that was trained in `ReLERNN_TRAIN` and estimates the distribution of predictions around each know recombination rate. The result is both an estimate of uncertainty, and a prediction that has been slightly corrected to account for biases in how the network predicts in this area of parameter space. The resulting file is created as `$/projectDir/vcfprefix.PREDICT.BSCORRECT.txt`, and is formatted similarly to `$/projectDir/vcfprefix.PREDICT.txt`, with the addition of columns for the low and high 95CI bounds. Note that this step is simulation heavy and runtimes can be slow.

The complete list of arguments used in `ReLERNN_BSCORRECT` is found below:
```
ReLERNN_BSCORRECT -h

usage: ReLERNN_BSCORRECT [-h] [-d OUTDIR] [-t NCPU] [-s SEED] [--gpuID GPUID]
                         [--nSlice NSLICE] [--nReps NREPS]

optional arguments:
  -h, --help            show this help message and exit
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  -t NCPU, --nCPU NCPU  Number of CPUs to use (defaults to total available cores)
  -s SEED, --seed SEED  Random seed
  --gpuID GPUID         Identifier specifying which GPU to use
  --nSlice NSLICE       Number of recombination rate bins to simulate over
  --nReps NREPS         Number of simulations per step
```

## Estimating a recombination landscape from pool-seq data

Similar to the directions above, the ReLERNN pipeline for pool-seq data is executed using four commands: `ReLERNN_SIMULATE_POOL`, `ReLERNN_TRAIN_POOL`, `ReLERNN_PREDICT_POOL`, and the optional `ReLERNN_BSCORRECT`.

### Before running ReLERNN
ReLERNN for pool-seq analyses takes as input a file of genomic positions and allele frequencies (herein a 'POOLFILE'; see example file).

Similar to ReLERNN for individually sequenced chromosomes, if you want to make predictions based on equilibrium simulations, you can skip ahead to executing `ReLERNN_SIMULATE_POOL`.
While ReLERNN is generally robust to demographic model misspecification, prediction accuracy may potentially be improved by simulating the training set under a demographic history that accurately matches that of your sample. ReLERNN optionally takes the raw output files from three popular demographic history inference programs ([stairwayplot_v1](https://sites.google.com/site/jpopgen/stairway-plot), [SMC++](https://github.com/popgenmethods/smcpp), and [MSMC](https://github.com/stschiff/msmc)), and simulates a training set under these histories. It is up to the user to perform the proper due diligence to ensure that the population size histories reported by these programs are sound. In our opinion, unless you know exactly how these programs work and you expect your data to represent a history dramatically different from equilibrium, you are better off skipping this step and training ReLERNN on equilibrium simulations. Once you have run one of the demographic history inference programs listed above, you simply provide the raw output file from that program to ReLERNN_SIMULATE_POOL using the `--demographicHistory` option.

### Step 1) ReLERNN_SIMULATE_POOL
`ReLERNN_SIMULATE_POOL` reads your POOLFILE and splits it by chromosome. The number of chromosomes in the pool must be specified using the `--sampleDepth` argument. The genomic chromosomes to be evaluated must be specified by providing a BED file of said positions using the `--genome` argument. A BED-formatted accessibility mask (with non-overlapping ascending windows) may be optionally provided using the `--mask` option. It is required that the POOLFILE use the extension `.pool`. The prefix of that file will serve as the prefix used for all output files (e.g. running ReLERNN on the file `population7.pool` will generate the result file `population7.PREDICT.txt`). It is strongly recommended that you use the default setting for `--maxSites`, larger values can cause training to fail and smaller values can result in lower accuracy. Users are required to provide an estimate of the per-base mutation rate for your sample, along with an estimate for generation time (in years). If you previously ran one of the demographic history inference programs listed above, just use the same values that you used for them. This is also where you will point to the output from said program, using `--demographicHistory`. If you are not simulating under an inferred history, simply do not include this option. Importantly, you can also set a value for the maximum recombination rate to be simulated using `--upperRhoThetaRatio`. If you have an a priori estimate for an upper bound to the ratio of rho to theta go ahead and set this here. Keep in mind that higher values will dramatically slow the coalescent simulations. We recommend using the default number of train/test/validation simulation examples, but if you want to simulate more examples, go right ahead. `ReLERNN_SIMULATE_POOL` then uses msprime to simulate 100k training examples and 1k validation and test examples. All output files will be generated in subdirectories within the path provided to `--projectDir`. It is required that you use the same projectDir for all four ReLERNN commands. If you want to run ReLERNN of multiple populations/taxa, you can run them independently using a unique projectDir for each. This step is simulation heavy and runtimes will strongly depend on the inferred population size.

The complete list of arguments used in `ReLERNN_SIMULATE_POOL` is found below:
```
ReLERNN_SIMULATE_POOL -h

usage: ReLERNN_SIMULATE_POOL [-h] [-p POOL] [--sampleDepth SAMD] [-g GENOME] [-m MASK] [-d OUTDIR]
                        [-n DEM] [-u MU] [-l GENTIME] [-r UPRTR] [-t NCPU] [-s SEED]
                        [--maxSites WINSIZEMX] [--maskThresh MASKTHRESH]
                        [--nTrain NTRAIN] [--nVali NVALI] [--nTest NTEST]

optional arguments:
  -h, --help            show this help message and exit
  -p POOL, --pool POOL     Filtered and QC-checked POOL file.
  --sampleDepth SAMD    Number of chromosomes in pool
  -g GENOME, --genome GENOME
                        BED-formatted (i.e. zero-based) file corresponding to
                        chromosomes and positions to consider
  -m MASK, --mask MASK  BED-formatted file corresponding to inaccessible bases
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  -n DEM, --demographicHistory DEM
                        Output file from either stairwayplot, SMC++, or MSMC
  -u MU, --assumedMu MU
                        Assumed per-base mutation rate
  -l GENTIME, --assumedGenTime GENTIME
                        Assumed generation time (in years)
  -r UPRTR, --upperRhoThetaRatio UPRTR
                        Assumed upper bound for the ratio of rho to theta
  -t NCPU, --nCPU NCPU  Number of CPUs to use (defaults to total available cores)
  -s SEED, --seed SEED  Random seed
  --maxSites WINSIZEMX
                        Max number of sites per window to train on. Important:
                        too many sites causes problems in training
  --maskThresh MASKTHRESH
                        Discard windows where >= maskThresh percent of sites
                        are inaccessible
  --nTrain NTRAIN       Number of training examples to simulate
  --nVali NVALI         Number of validation examples to simulate
  --nTest NTEST         Number of test examples to simulate
```

### Step 2) ReLERNN_TRAIN_POOL
`ReLERNN_TRAIN_POOL` takes the simulations created by `ReLERNN_SIMULATE_POOL` and uses them to train a recurrent neural network. The only difference here is that the mean read depth of the pool must be specified using the `--readDepth` argument. You can also specify a minor allele frequency threshold (`--maf`), if a similar threshold was used to generate your POOLFILE. Again, we recommend using the defaults for `--nEpochs` and `--nValSteps`, but if you would like to do more training, feel free. To set the GPU to be used for machines with multiple dedicated GPUs use `--gpuID` (e.g. if running an analysis on two populations simultaneously, set `--gpuID 0` for the first population and `--gpuID 1` for the second). `ReLERNN_TRAIN_POOL` outputs some basic metrics of the training results for you, generating the figure `$/projectDir/networks/poolprefix.pdf`. The default value of `-nCPU` for this step is the max number of available cores, as training on pooled data with a single core can be very slow.

The complete list of arguments used in `ReLERNN_TRAIN_POOL` is found below:
```
ReLERNN_TRAIN_POOL -h

usage: ReLERNN_TRAIN_POOL [-h] [-d OUTDIR] [--readDepth SEQD] [--maf MAF] [--nEpochs NEPOCHS]
                     [--nValSteps NVALSTEPS] [-t NCPU] [-s SEED] [--gpuID GPUID]

optional arguments:
  -h, --help            show this help message and exit
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  --readDepth SEQD     Mean read depth of the pool
  --maf MAF     discard simulated sites with allele frequencies < maf
  --nEpochs NEPOCHS     Number of epochs to train over
  --nValSteps NVALSTEPS
                        Number of validation steps
  -t NCPU, --nCPU NCPU           Number of CPUs to use (defaults to total available cores)
  -s SEED, --seed SEED  Random seed
  --gpuID GPUID         Identifier specifying which GPU to use
```

### Step 3) ReLERNN_PREDICT_POOL
`ReLERNN_PREDICT_POOL` now takes the same POOL file you used in `ReLERNN_SIMULATE_POOL` and predicts per-base recombination rates in non-overlapping windows across the genome. The output file of predictions will be created as `$/projectDir/poolprefix.PREDICT.txt`. It is important to note that the window size used for predictions might be different for different chromosomes. A complete list of the window sizes used for each chromosome can be found in third column of `$/projectDir/networks/windowSizes.txt`. Use the optional `--minSites` argument to exclude windows with fewer than the desired number of SNPs. If you are not interested in estimating confidence intervals around the predictions, your ReLERNN analysis is now finished. If you are getting OOM errors at this step you can try setting `--batchSizeOverride` to a value significantly less than the total number of windows along a chromosome (found in the last column of `$/projectDir/networks/windowSizes.txt`).

The complete list of arguments used in `ReLERNN_PREDICT_POOL` is found below:
```
ReLERNN_PREDICT_POOL -h

usage: ReLERNN_PREDICT [-h] [-p POOL] [-d OUTDIR] [--minSites MINS]
                       [--batchSizeOverride BSO] [--gpuID GPUID] [-s SEED]

optional arguments:
  -h, --help            show this help message and exit
  -p POOL, --pool POOL     Filtered and QC-checked POOL file.
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  --minSites MINS       Minimum number of SNPs in a genomic window required to
                        return a prediction
  --batchSizeOverride BSO
                        Batch size to use for low memory applications
  --gpuID GPUID         Identifier specifying which GPU to use
  -s SEED, --seed SEED  Random seed
```

### Optional Step 4) ReLERNN_BSCORRECT
This step is exactly the same as in ReLERNN for individually sequenced chromosomes (above).

The complete list of arguments used in `ReLERNN_BSCORRECT` is found below:
```
ReLERNN_BSCORRECT -h

usage: ReLERNN_BSCORRECT [-h] [-d OUTDIR] [-t NCPU] [-s SEED] [--gpuID GPUID]
                         [--nSlice NSLICE] [--nReps NREPS]

optional arguments:
  -h, --help            show this help message and exit
  -d OUTDIR, --projectDir OUTDIR
                        Directory for all project output. NOTE: the same
                        projectDir must be used for all functions of ReLERNN
  -t NCPU, --nCPU NCPU  Number of CPUs to use (defaults to total available cores)
  -s SEED, --seed SEED  Random seed
  --gpuID GPUID         Identifier specifying which GPU to use
  --nSlice NSLICE       Number of recombination rate bins to simulate over
  --nReps NREPS         Number of simulations per step
```

ReLERNN

ReLERNN 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

ReLERNN

ReLERNN 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README