miniwfa

KO | EN

gitlite — search

#ai #llm #deep-learning #linux #macos #java #nodejs #windows #cli #kubernetes #awesome-list #vue #security #open-source

(★ 51)

A reimplementation of the WaveFront Alignment algorithm at low memory

miniwfa 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

## Getting Started
```sh
# install and test
git clone https://github.com/lh3/miniwfa
cd miniwfa && make test-mwf
./test-mwf -c test/t3-?.fa

# use as a library
cp miniwfa.{c,h} kalloc.{c,h} your_src/
```

## Introduction

Miniwfa is a reimplementation of the WaveFront Alignment algorithm
([WFA][wfa-pub]) with dual gap penalty. For long diverged sequences, the
original WFA is slow and memory hungry. Miniwfa introduces a low-memory mode
and a chaining heuristic to address these issues.

Miniwfa was developed in parallel to the linear-space [BiWFA][biwfa] algorithm.
Now BiWFA uses less memory and is generally faster than miniwfa in the exact
mode. Miniwfa is much faster in the heuristic mode but it does not guarantee to
find the optimal solution.

Miniwfa can be used as a library. Here is a compilable sample program:
```cpp
// compile with gcc -O3 this-prog.c miniwfa.c kalloc.c
#include <string.h>
#include <stdio.h>
#include "miniwfa.h"
int main(int argc, char *argv[]) {
 mwf_opt_t opt;
 mwf_rst_t r;
 mwf_opt_init(&opt);
 if (argc >= 3) {
 mwf_wfa_auto(0, &opt, strlen(argv[1]), argv[1], strlen(argv[2]), argv[2], &r);
 printf("%d\n", r.s);
 }
 return 0;
}
```

## Algorithm

When reporting alignment score only, miniwfa behaves largely the same as the
original WFA. Miniwfa differs mainly in traceback. In the high memory mode,
miniwfa packs traceback information into 7 bits per entry:
```txt
extD2<<6 | extI2<<5 | extD1<<4 | extI1<<3 | fromState
```
where `extD1`, for example, indicates whether we are extending the `D1`
deletion state, and `fromState` keeps the max state (5 possible values).
As such, miniwfa uses 1 byte for each traceback entry. The standard WFA uses 20
bytes per entry.

Miniwfa has a low-memory mode inspired by but different from wfalm. In the
wfalm terminology, miniwfa stores a "stripe" of traceback information every *p*
cycles. It finds the positions on these stripes that the optimal alignment path
goes through. Miniwfa then applies the WFA algorithm for a second time. In this
round, it resets the bandwidth to 1 whenever it reaches a stripe. Miniwfa
approximately uses (20*qs*2/*p*+*ps*) bytes of memory. Here, *s* is
the optimal alignment penalty, *p* is the distance between stripes and
*q*=max(*x*,*o*1+*e*1,*o*2+*e*2)
is the maximal penalty between adjacent entries. The time complexity is
*O*(*n*(*s*+*p*)) where *n* is the length of the longer sequence.

In the heuristic mode, miniwfa chains low-occurrence k-mers and fills gaps in
the chain with the exact algorithm.

## Vectorization

Miniwfa relies on [compiler vectorization][auto-vec] to parallelize three key
loops. Old compilers (e.g.  gcc-4.8.5) that do not support auto vectorization
will lead to lower performance. Some compilers (e.g. gcc-6.4.0) cannot
vectorize one of the loops.  Clang-13.1.6 and gcc-10.3.0 are known to work well
with miniwfa. Also note that gcc does not vectorize loops with -O2 and
vectorization is influenced by SIMD.  If you use miniwfa as a library, it is
recommended to enable `-msse4 -O3` when compiling with gcc.

## Evaluation

We only use three pairs of sequences for evaluation. The first pair consists of
the two haplotypes of NA19240 around the C4A/C4B gene. They are 100-150kb in
length with a penalty of 26,917 under penalty *x*=4,
*o*1=4, *e*1=2, *o*2=15 and
*e*2=1. The second pair consists of GRCh38 and CHM13 around MHC.
They are about 5Mb in length with a penalty of 229,868. The third pair consists
of the two MHC haplotypes in HG002 with a penalty of 267,637. These sequences
can be found [via Zenodo][seq-zenodo].

We checked out the development branch of WFA2-lib on 2022-04-25 and compiled the code with
gcc-10.3.0 (no LTO) on a CentOS 7 server equipped with two Xeon 6230 CPUs.
The table below shows the timing and peak memory for miniwfa and BiWFA in its
linear mode. The table used to include other memory modes of WFA2-lib and wfalm, which were removed
because BiWFA is a clear winner now.

|Method |Command line |tMHC (s)|MMHC (GB)|tHG002|MHG002|tC4|MC4|
|:------------------|:---------------|------------------:|-------------------:|----------------:|----------------:|-------------:|-------------:|
|miniwfa high-mem |test-mwf -c |385 |50.6 |533 |68.1 |3.8 |0.73 |
|miniwfa low-mem |test-mwf -cp5000|544 |4.1 |735 |5.3 |5.8 |0.22 |
|biwfa linear |test-wfa -cm0 |308 |0.4 |837 |0.4 |2.0 |0.05 |

## Historical notes on WFA and related algorithms

I got the following notes wrong a few times. Please let me know if you found
the narrative is still inaccurate.

Given a pair of strings, let *n* be the length of the longer string and *d* is
the edit distance between the two strings. Ukkonen found the *O*(*nd*)
algorithm to compute edit distances in 1983 and [published it in 1985][U85a].
Myers independently conceived the same algorithm [in 1984][myers-comment] and
published it [in 1986][myers86]. He additionally introduced a few variations
including a linear-space algorithm with forward and reverse search.
It is essentially BiWFA under edit distance. The idea of "wave" was implicit in
Myers' 1986 paper. [His 2014 paper][dalign] explicitly explained "wave".

Sometimes the *O*(*nd*) algorithm is also attributed to [Landau and Vishkin
(1989)][lv89]. I don't know if Landau and Vishkin were aware of Ukkonen's work
at the time of submission in 1986, but their published paper in 1989 did cite
Ukkonen (1985).

The search for a similar algorithm for linear or affine gap penalties took
three decades. To the best of my knowledge, [Xin et al (2017)][leap] first
found a version of this algorithm but apparently they have never published it
in a peer-reviewed journal. [Marco-Sola et al (2021)][wfa-pub] were probably
unaware of Xin et al. They independently published the WFA algorithm as we know
today. They also gave a highly efficient implementation, beating all global
alignment algorithms by a large margin.

A major concern with the original WFA is its large memory consumption. [Eizenga
and Paten (2022)][EP22] implemented wfalm to reduce its peak memory. This repo
was inspired by this work. Then [Marco-Sola et al (2022)][biwfa] developed
BiWFA that finds the alignment in linear space. This is so far the best
performing algorithm.

It is worth noting that also in 1985, Ukkonen published [another
algorithm][U85b] with expected *O*(*nt*) time complexity where *t* is a given
threshold. This algorithm guarantees to find the edit distance *d* if
*d*&le;*t*. It is somewhat similar to banded alignment but distinct from his
*O*(*nd*) algorithm published in the same year.

[biwfa-pub]: https://www.biorxiv.org/content/10.1101/2022.04.14.488380v1
[wfa-pub]: https://pubmed.ncbi.nlm.nih.gov/32915952/
[biwfa]: https://github.com/smarco/BiWFA-paper
[wfa2]: https://github.com/smarco/WFA2-lib
[wfalm]: https://github.com/jeizenga/wfalm
[seq-zenodo]: https://zenodo.org/record/6056061
[auto-vec]: https://en.wikipedia.org/wiki/Automatic_vectorization

[myers86]: https://link.springer.com/article/10.1007/BF01840446
[U85a]: https://www.sciencedirect.com/science/article/pii/S0019995885800462
[U85b]: https://www.sciencedirect.com/science/article/abs/pii/0196677485900239
[edlib]: https://github.com/Martinsos/edlib
[lin-space]: https://en.wikipedia.org/wiki/Hirschberg%27s_algorithm
[leap]: https://www.biorxiv.org/content/10.1101/133157v3
[myers-bit]: https://dl.acm.org/doi/10.1145/316542.316550
[EP22]: https://www.biorxiv.org/content/10.1101/2022.01.12.476087v1
[lv89]: https://doi.org/10.1016/0196-6774(89)90010-2
[myers-comment]: https://github.com/lh3/miniwfa/issues/4#issue-2306751524
[dalign]: https://link.springer.com/chapter/10.1007/978-3-662-44753-6_5

miniwfa

miniwfa 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

miniwfa

miniwfa 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README