franka_damping_design

KO | EN

gitlite — search

#javascript #python #hacktoberfest #react #ai #typescript #llm #go #golang #android #machine-learning #rust #deep-learning #linux

franka_damping_design

★ 15 Open GitHub ↗

Damping Design for Joint and Cartesian Impedance Control for Franka Emika Panda

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Franka Damping Design
Joint and Position Impedance Controllers for Franka Emika Panda with Damping Matrix Design developed at TU Delft, NL. The results were presented at Human Friendly Robotics, Delft 2022.

If this controller was useful for your research, please cite: 
```
Coleman, Tomás, Giovanni Franzese, and Pablo Borja. "Damping Design for Robot Manipulators." Human-Friendly Robotics 2022: HFR: 15th International Workshop on Human-Friendly Robotics. Cham: Springer International Publishing, 2023.
```

```
@inproceedings{coleman2023damping,
  title={Damping Design for Robot Manipulators},
  author={Coleman, Tom{\'a}s and Franzese, Giovanni and Borja, Pablo},
  booktitle={Human-Friendly Robotics 2022: HFR: 15th International Workshop on Human-Friendly Robotics},
  pages={74--89},
  year={2023},
  organization={Springer}
}
```

### How to use the controller

Install track IK:

``` sudo apt-get install ros-<ros-distro>-trac-ik-kinematics-plugin ```

-In case you already have some versions of libfranka installed, remove them to avoid conflicts with:
```
sudo apt remove "*libfranka*"
sudo apt autoremove
```
Type the following commands to generate and build libfranka
```
cd
sudo apt install build-essential cmake git libpoco-dev libeigen3-dev
git clone --recursive https://github.com/frankaemika/libfranka
cd libfranka
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
cmake --build .
```

This last comand may take several minutes.

Now create a workspace (here called catkin_ws) and install franka_ros in it
```
cd
mkdir -p catkin_ws/src
cd catkin_ws
source /opt/ros/<ros-distro>/setup.sh
catkin_init_workspace src
git clone --recursive https://github.com/frankaemika/franka_ros src/franka_ros
rosdep install --from-paths src --ignore-src --rosdistro <ros-distro> -y --skip-keys libfranka
source devel/setup.sh
```
- Finally, install the controllers inside the folder "franka_ros" and build the code:
```
cd src/franka_ros
git clone https://github.com/franzesegiovanni/franka_advanced_controllers.git
cd ../..
source /opt/ros/<ros-distro>/setup.bash
catkin_make -DMAKE_BUILD_TYPE=Release -DFranka_DIR:PATH=~/libfranka/build
```

To run the controller:
- Switch on your Panda robot (make sure the gripper is initialized correctly), unlock its joints (and activate the FCI if necessary).
- Open a terminal, in every terminal: ```source devel/setup.bash```
- ```roslaunch franka_advanced_controllers cartesian_impedance_advanced_controller.launch robot_ip:=ROBOT_IP load_gripper:=True```
- In a different terminal (don't forget to source again): ``` rosrun franka_advanced_controllers franka_gripper_online ```

To make it working with the simulator, please add: 
1. in franka_gazebo/CMakeList.txt  
in catkin_package(...)
add
```franka_advanced_controllers```

2. in franka_gazebo/CMakeList.txt  
in find_package(..)
add 
```franka_advanced_controllers```

3. in franka_gazebo/package.xml
add
```
<depend>franka_advanced_controllers</depend>
```
4. in franka_gazebo/config/sim_controllers.yaml
add
```
cartesian_impedance_advanced_controller:
  type: franka_advanced_controllers/CartesianImpedanceAdvancedController 
  arm_id: $(arg arm_id)
  joint_names:
    - $(arg arm_id)_joint1
    - $(arg arm_id)_joint2
    - $(arg arm_id)_joint3
    - $(arg arm_id)_joint4
    - $(arg arm_id)_joint5
    - $(arg arm_id)_joint6
    - $(arg arm_id)_joint7
```

rosparam set use_sim_time false

Rmeber to compile again and to set your rosmaster as the local ip.

franka_damping_design

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README