KO | EN

GitLite

Minimalist Open Source Repository Search Engine

gitlite — search

#typescript #ai-agents #cli #open-source #ai #claude-code #codex #developer-tools #dsh-plugin #ai-agent #mcp #deepseek-harness

XiaomiXiaofangFirmware

★ 43 Open GitHub ↗

Custom firmware for the Xiaomi Xiaofang IP Camera

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# XiaomiXiaofangFirmware
Files for building your own custom firmware for the Xiaomi Xiaofang IP Camera.

!! Many issues, bugs, troubles, errors, warnings and disasters will happen when using this firmware at this moment. !!
!! I cannot guarantee that you can reflash your device back to the original Xiaomi firmware. !!

# Introduction
This repository will host files to build a custom firmware for the Xiaomi Xiaofang IP Camera. This repository will extend the generic Sonix SDK version 1.60.

It also will host a script to modify the original Xiaomi firmware and rebuild a customized firmware.

# HowTo flash and use a prebuilt firmware
1. After booting the device it will host an AP with the name "SNIP39_xxxxxxx" (xxx=mac). The passphrase is 8x8, thus: "88888888".
1. After connecting to the SNIP AP. You can access the WebAdmin interface by browsing to: https://10.42.0.1
You can login using "root", pw: ismart12

First test release.

You can flash this version with placing the firmware (FIRMWARE660R.bin) in the root of your SDCard and powering-on the device holding the setup button for a few seconds.

Notes:
* make kernelmenuconfig: deselect: "Device Drivers" > "Network device support" > "Ethernet (10/100 mbit)". The SNX MAC Ethernet device hangs during boot.
* Version number of Realtek RTL8188 drivers can be found in include/rtw_version.h

XiaomiXiaofangFirmware

Explore Similar Repositories

Was this content helpful?

Recent Feedback

Download README