waves

KO | EN

gitlite — search

#javascript #hacktoberfest #ai #typescript #machine-learning #deep-learning #nodejs #windows #cli #kubernetes #awesome-list #pytorch #security #openai

(★ 11)

A simple module to simulate dynamic waves using the 1-dimensional wave PDE

waves 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# wave.js
### A simple module to simulate dynamic waves using the 1-dimensional wave PDE
[usage](#usage) | [settings](#settings) | [demos](#demos) | [implementation](#implementation)

## Usage
You can create a wave like so:
```javascript
var w = wave();
```
Now you have a wave with some default settings. Let's explicitly pass in the number of samples the wave is made of.

```javascript
var w = wave({
    numSamples: 100
});
```

Cool! Now render the wave. Since the width of the wave spans 0 to 1 and the height of the wave spans -1 to 1, we'll need to translate these into canvas coordinates. Let's make it so that we just draw a dot at each sample.

```javascript
var canvas = document.getElementById('#wave-canvas');
var context = canvas.getContext('2d');
var unitX = canvas.width / 100;
for (var i = 0; i < 100; i++) {
    // value between -1 and 1, where 0 is the neutral wave level
    var waveHeight = w.height(i);

// draw a 2x2-pixel square at the wave
    context.fillRect(
        i * unitX,
        canvas.height / 2 - (canvas.height / 2) * waveHeight,
        2,
        2
    );
}
```

Here's the result:

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave0.png)

Not very exciting, huh? Let's give it a little splash and turbulence and render it again.

```javascript
// x [0, 1], y [-1, 1], strength (turbulence multiplier)
w.splash(0.5, 0.5, 1);
w.churn(0.5, 0.5, 1);
```

The above should create a splash upwards in the middle of the wave, and also general turbulence ("churn") centered at the same location.

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave1.png)

Now let the wave propagate by advancing it (with a delta time) and re-rendering it.
```javascript
w.tick(1);
```

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave2.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave3.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave4.png)

The next snapshots are taken after fast-forwarding 10 ticks after each previous snapshot. Pro tip: it creates a smoother transition to call `w.tick(1)` than to make one call to `w.tick(10)`.

```
for (var i = 0; i < 10; i++) {
    w.tick(1);
}
```

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave5.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave6.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave7.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave8.png)

![](https://raw.githubusercontent.com/jiwonkim/waves/master/readme_assets/wave9.png)

That's pretty much it! Take a look at some [demos](#demos) for inspiration, and refer to the [complete list of settings](#settings) to customize your wave.

## Settings
When wave is invoked with no arguments, the default settings are used. But you can manually specify the settings to customize the behavior of the wave.

| Setting | Default value | Description |
|---------|---------------|-------------|
| `numSamples` | `100` | The number of samples that the wave will consist of. |
| `splashiness`| `0.01` | This is the constant used in the one-dimensional wave PDE, descripted [here](#implementation). Higher value will mean faster propagation and more exaggerated splashes. |
| `damping` | `0.995` | This value is multiplied to the wave's velocity for each time step, so that a splash will eventually die down. If the damping is det to `1`, the wave will keep on splashing forever. |
| `wrap` | `false` | If `true`, the wave will act as if its ends are connected. |
| `children`   | `[{period: 0.25, amplitude: 0.2}, {period: 0.5, amplitude: 0.6}, {period: 0.3, amplitude: 0.2}]` | This is what the wave is made out of when `churn` is called. Each child wave is shifted to the correct phase and added on top of each other to create an organic turbulence across the wave. The units are in wave-space x and y, where x spans 0 to 1 and y spans -1 to 1. The amplitudes are normalized to add up to 1. |

Here's an example that creates a wave that's splashier than the default but dies down faster, with a more complex churn:
```javascript
var w = wave({
    numSamples: 100,   
    splashiness: 0.05,
    damping: 0.9,
    children: [
        {period: 0.2, amplitude: 0.2},
        {period: 0.3, amplitude: 0.3},
        {period: 0.4, amplitude: 0.4},
        {period: 0.5, amplitude: 0.1}
    ]
})
```

## Demos

[Hello Wave](http://jiwonk.im/wave/demos/hello-wave.html)

[Surfing Duckies](http://jiwonk.im/wave/demos/surfing-duckies.html)

[Wobble the Bubble](http://jiwonk.im/wave/demos/bubble.html)

[Make It Rain!](http://jiwonk.im/wave/demos/rain.html)

## Implementation

### Step 1: Grab the PDE for a one dimensional wave

From the [Wikipedia entry for the wave equation](http://en.wikipedia.org/wiki/Partial_differential_equation#Wave_equation_in_one_spatial_dimension):

```
u_tt = c^2 * u_xx
```
#### The goal
Get `u(t, x)`, which tells you the height of the wave at time `t` at one-dimensional position `x`.

#### How to get `u(t, x)`

Get `u_tt`, the acceleration of the wave, at position x. Then integrate it into the velocity of the wave over time. Then update the value of `u(t, x)` by adding the current velocity to the previous `u(t, x)`.

#### How to get `u_tt`

Easy peasy. According to the wave equation, all we need to do is set a constant `c` and multiply its square to `u_xx`.

#### How to get `u_xx`

Intuitively, the second differential of `u` wrt `x` is the horizontal acceleration of the wave. The momentum of the crest, loosely speaking. For this, we need to start with a value of `u_x`, then differentiate it.

*But then where do we get `u_x`?*

### Step 2: Init variables needed to compute `u(t, x)`

To get the wave going, we'll need to start with a snapshot of `u_t(0, x)`. Let's work with 10 samples on the wave.

```
u = [0, 0, 0, 0, 0, 1, 1, 1, 1, 1]
u_t = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
```

This snapshot shows that currently the all the water is on the right, and there is no starting velocity.

Before we go on and try to compute `c`.

```
dt = 0.1
dx = 0.1
c = 2
```

They're just arbitrary values without units for now. Just avoiding 1 to make things interesting.

### Step 3: Apply the PDE to the variables

Now that we have the initial conditions set up, we can apply the PDE. Let's first compute `u_x`, as left hanging in Step 1.

```
u_x[i] = (u[i+1] - u[i])/dx for i in [0, n-1)
```

So for the initial conditions we set up in step 2, we'll get the following `u_x`:

```
u_x = [0, 0, 0, 0, 10, 0, 0, 0, 0]
```
Now we can compute `u_xx`:

```
u_xx = [0, 0, 0, 100, -100, 0, 0, 0]
```

In English, this tells us that the center of the wave wants to splash - the place just before the water suddenly rises wants to rise, and the place just after the rise wants to fall.

Now finally we apply the wave equation and compute `u_tt`!

```
u_tt = [0, 0, 0, 400, -400, 0, 0, 0]
```
Now that we know `dt`:
```
u_t = [0, 0, 0, 40, -40, 0, 0, 0]
```

Then we integrate again to get the change in water level for each sample, and update `u`! But before we do that real quick, notice that we only have 8 values for velocity after all the differentiating. We'll just copy over the values on the edge to give us 10 values for all 10 samples.

```
u += [0, 0, 0, 0, 4, -4, 0, 0, 0, 0]
```

Now we have a new snapshot of the wave water levels at `t = 0.1`!

```
u = [0, 0, 0, 0, 4, -3, 1, 1, 1, 1]
```

Now it's a matter of tweaking the initial conditions, the wave constant, and the number of samples to get your wave looking the way you want! 👌

Thanks [Daniel](http://dcpos.ch) for being my math consultant!

waves

waves 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

waves

waves 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README