yandex-cloud-vpn

KO | EN

gitlite — search

#javascript #hacktoberfest #ai #llm #golang #go #deep-learning #docker #nodejs #java #windows #awesome #awesome-list #security

yandex-cloud-vpn

(★ 83)

No description available.

yandex-cloud-vpn Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# Quick VPN with Yandex Cloud

## What is it?

There're days, when you need to access a web-site hosted in Russia, which has prevented the out-of-the-country access.
Unfortunately, some of the utility providers do this, yet you still need to pay for the utilities when you have fled
the country.

Yandex.Cloud allows you to create a low-cost preemptive virtual machine for under a rouble per hour. Instruction and the
script in this repo help you create such a virtual machine.

## How to prepare?

1. Set up Yandex Cloud account.
2. Configure the [billing account in Yandex Cloud](https://console.cloud.yandex.ru/billing/create-account).
3. Install [yc](https://cloud.yandex.com/en/docs/cli/quickstart).
4. Restart your shell to make `yc` command available.
5. Configure `yc` by calling `yc init`.
6. [Install Wireguard](https://www.wireguard.com/install/) on the device where you want to use VPN.
7. Ensure you have an SSH-key generated, with public key saved as `~/.ssh/id_rsa.pub`.
   * If you prefer to use different public key, edit `do.sh` via hot replace `id_rsa` to `you_name_it` - double-check that there are three usages
8. Download [do.sh](./do.sh) and run it, following the on-screen instructions. Keep the script running for now.
9. Configure your WireGuard client using the config displayed by the script:
   * Save generated configuration file to `/etc/wireguard/wg0.conf`
   * Execute `sudo wg-quick up wg0` to setup tunnel
10. When you're finished, press Enter in the terminal where you have the script running. It should remove the created virtual machine. Check that the server was removed from [Yandex Cloud](https://console.cloud.yandex.ru/).
11. Execute `sudo wg-quick down wg0` to remove tunnel

By default the command will generate a wireguard config for 1 client, using the
subnet `192.168.55.0/24`. You can override the defaults by calling the script
with the arguments: `./do.sh -c 10 -a 10.0.0` — this will generate config for 10
clients with subnet `10.0.0.0/24`.

It is also possible to request displaying the config as a QR-code, which can be
useful when you need to configure VPN on mobile clients. Pass argument `-q 1` to
generate one client config with the QR code, `-q 2` to generate two codes and so
on. The value passed to `-q` argument must be greater than or equal to the value
passed to `-c`.

Below is the example produced by this script (so you'll know what to look for in
the output):

```ini
[Interface]
Address = 10.10.10.2/24
DNS = 8.8.8.8
PrivateKey = cGiXg4D1SHlvyxqRCeuwxXil9UeMgdfw4WqqNwvZ+ls=

[Peer]
PublicKey = WtPF2qWwDlGSjfo0SJu3kr6FeB/csBXBmD+L72/j8mc=
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = 62.84.2.1:43517
PersistentKeepalive = 30
```

You need to add this config into your wireguard client and activate the connection.

yandex-cloud-vpn

yandex-cloud-vpn Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

yandex-cloud-vpn

yandex-cloud-vpn Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README