PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2

KO | EN

gitlite — search

#python #ai #llm #golang #machine-learning #rust #docker #macos #java #windows #awesome #security #openai #open-source

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2

(★ 39)

Installation notes for setting up my Raspberry Pi Zero 2 w

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

# PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2

>Newer, simpler docker version available! https://github.com/mgrimace/wirehole-ui-odoh

**Update, added ODOH and DNSCrypt:** Removed cloudblock, and added [dnscrypt-proxy](https://github.com/DNSCrypt/dnscrypt-proxy) to enable Oblivious-DNS-Over-HTTPS (ODoH) via DNSCrypt. In brief, DNS requests are now sent encrypted to an 'oblivious' relay, which then sends *anonymized* DNS requests to the resolver.

------

These are my install notes for setting up Pi-Hole, PiVPN, and Homebridge on my new Raspberry Pi Zero 2w. Please feel free to contribute notes, suggestions, clarifications, etc.

**Pi-Hole** provides DNS-based adblocking. This setup will block ads and telemetry on all devices in the home, and specific devices on-the-go using Wireguard.

**Homebridge** allows my home to recognize my assorted smart devices as HomeKit compatible. With this setup I can access both PiHole and Homebridge on my local network or out-of-home.

# Table of contents

1. [Equipment](#Equipment)
2. [Build Pi Zero 2](#Build-Pi-Zero-2)
3. [Setup the Pi](#Setup-the-Pi) - add ZRAM and over/unclocking 
4. [Install Pi-Hole](#Install-Pi-Hole)
5. [Install PiVPN](#Install-PiVPN)
6. [Install DNSCrypt](#Install-DNScrypt) - customize the config for ODOH
7. ['Hardcode' DNS into Pi](#Hardcode-DNS) - Optional troubleshooting step to avoid the Pi pointing to Pi-hole on itself for DNS, potentially creating a non-working loop
8. [Router setup](#Router-setup)
9. [Useful Pihole addons](#Useful-Pihole-Addons) - add lists, sync multiple pi-holes, check which lists are being used
10. [Install HomeBridge](#Homebridge.md)
11. [Support this project](#Support-this-project)

# Equipment

I purchased a Raspberry Pi Zero 2 Starter kit, which included:

- Raspberry Pi Zero 2 W
- A UniPiCase Zero Standard Case
- Mini HDMI to HDMI Adapter
- USB OTG Cable
- 32GB Class 10 SD Card - blank
- 5.1V 2.5A Power Supply
- 2x20 Male Header Strip 
- Set of two heatsinks

For this project, I won't be using the adapters or the header strip.

# Build Pi Zero 2

* Select the largest of the two heatsinks, peel off the sticker backing on the bottom, and attach it to the chip. You don't need the smaller heatsink.
* Open the UniPiCase by pinching the tabs on the bottom and lightly pulling up on the top of the case
* Put the front plate from the UniPiCase onto the Pi Zero 2, then gently push the front plate and Pi Zero 2 down into the bottom of the case. There's a little tab on the left that will hold it in place.
* Leave the top off for now, but you can stick the little rubber feet onto the bottom of the case at this point

## Get the SD card ready

* Go to [raspberrypi.com](raspberrypi.com) and download and install the Raspberry Pi Imager. I'm using a Mac for this install
* I selected Raspberry Pi OS **Lite 32-bit (legacy)** by going to "other" section. 
  * **Lite:** we don't need a desktop environment
  * **Legacy**: Bullseye (legacy) is presently required for cloudblock, and it looks like gravity-sync as well.
  * **32 vs 64:** There's an exceptionally detailed techincal writeup on the Pi Zero 2 [here](https://github.com/ThomasKaiser/Knowledge/blob/master/articles/Quick_Review_of_RPi_Zero_2_W.md) that suggests 32-bit systems are more memory efficient on a memory-limited system such as this. However, some things like cloudflare are dropping 32-bit support. Hence, I switched to a 64-bit build for longer-term stability.
* Before continuing, select advanced options:
  * **Enable SSH**: I selected *allow public-key authenitcation* only
  * You can leave the default/prefilled option for set authorized_keys for 'pi'. This automatically creates the required authorization keys. That means I don't have to use a password when connecting to my Pi from this computer
  * I entered a key generated by Termius, my new SSH program. 
  * Set username and password
  * **Set-up wifi:** Set wifi SSID and password
* Write the SD card

# Setup the Pi

## Connect to the Pi

- Insert the SD card into the Pi, snap on the lid, and plug your Pi in to the A/C adapter using the right-most slot
- Your Pi will automatically connect to your wifi. For me, the easiest way to find the Raspberry Pi's IP address was to look for it on my network using my router's app
- **(Recommended) Set a static IP for the Pi** I used my wireless router settings to reserve its IP address (i.e., so the Pi doesn't change its IP on me)
- Open Terminal and connect to it remotely by using SSH. To do so type or copy/paste `ssh pi@rasberrypi.local`. If you changed your Pi username, replace `pi` with `username`. If you selected allow public-key authentication only, you shouldn't have to use a password to connect.
- **Additional troubleshooting step if you've re-flashed the SD card (e.g., setting it up again from scratch):**
- Use `ssh-keygen -R raspberrypi.local` If you are re-creating your SD card using your previous/existing keys you may get a scary-looking error when you try and connect via SSH. This command will delete your previous, unique fingerprint and generate a new one to fix this error. If you do so, run this on your home machine prior to ssh.

## Increase the Pi's memory

Prior to running ansible as part of installing Cloudblock, we need to increase the available memory or we run into errors during the install process due to limited free memory on the Pi Zero 2. There are two ways to do this, I've tested both and I'm using ZRam currently:

### enable ZRam

- [Zram](https://www.kernel.org/doc/Documentation/blockdev/zram.txt**) creates compressed RAM based block storage. This compression allows additional memory inside RAM in exchange for the processing power used for compression. This has the benefit of being faster than using the SD card for swap memory.
- To enable, use `sudo apt install zram-tools` 
- **(optional)** increase Pi's tendency to use swap now that we are using Zram (for more information, see [source](https://haydenjames.io/raspberry-pi-performance-add-zram-kernel-parameters/) for more details).

* Use `sudo nano /etc/sysctl.conf` to add the following to the end of your **/etc/sysctl.conf** file:

```bash
    vm.vfs_cache_pressure=500
    vm.swappiness=100
    vm.dirty_background_ratio=1
    vm.dirty_ratio=50
    ```

Then enable with:

```bash
    sudo sysctl --system
    ```

## (Optional) Overclock the Pi

This carries risk. Please read and review your options first. In particular, you'll need some way to deal with heat. See discussion here for tested values, I went with relatively safe numbers: https://forums.raspberrypi.com/viewtopic.php?t=322734

`sudo nano /boot/config.txt`

Then paste the following to the end of the file:

```
# Overclock
arm_freq=1200
over_voltage=2
core_freq=500
```

Reboot

## (alternative) Underclock the Pi

Rather than overclocking the Pi, you may wish to underclock it for additional power savings and/or thermal management. Follow the same steps above and use

```
# Underclock
arm_freq=600
gpu_freq=300
sdram_freq=400
```

## (Optional) Add another device that can log-in to the Pi

1. On your other computer that you want to also be able to log into the Pi from, open terminal and use `ssh-keygen -t rsa` to create a new SSH key pair. Alternatively, use one you already have.
2. Copy the contents of the public key using `cat ~/.ssh/id_rsa.pub`
3. Login to the Pi using your working device, then use `echo [paste public key content here] >> ~/.ssh/authorized_keys`. 
4. Alternatively, use a text-editor like `nano ~/.ssh/authorized_keys` and paste your public key content to a new line in that file. If you're working with nano, press `esc` then `$` to wrap long strings of text (like these keys) to make it easy to read. Then hit `control + x` then `y` then `enter` to save your changes.
5. Log out using your old device
6. Log in using your new device, assuming you're using the defaults, you should be able to log-in using `ssh pi@raspberrypi.local` or `ssh -i ~/.ssh/[key name] [username]@[raspberry pi ip]` if you're not using defaults keys and/or user names
7. Repeat steps 1-6 on any other devices you want to add

## (Optional) Create a host file to make it easier to log in if you're not using default keys

- If you're not using the default key name of `id_rsa` (e.g., you created your own name), make a file called `config` in your home computer's ~/.ssh/ directory and include the following

- ```bash
  Host [Raspberry Pi IP]
  IndentityFile ~/.ssh/[key name]
  ```

- This will allow you to connect to your Pi in Terminal by just using `ssh [username]@[raspberry pi ip]`. If you skip this step, you'll need to specify the name of your key file every time you connect, as in: `ssh -i ~/.ssh/[key name] [username]@raspberry pi ip]`

# Install Pi-Hole

- The most up-to-date Pi-Hole installation instructions can be found here: https://docs.pi-hole.net/main/basic-install
- Otherwise, go ahead and use the official install script: `curl -sSL https://install.pi-hole.net | bash`

# Install PiVPN

- The most up-to-date PiPVN instructions can be found here: https://www.pivpn.io
- Otherwise, go ahead and use the official install script: `curl -L https://install.pivpn.io | bash`

**Note:** if you have a dynamic dns (DDNS) address, when PiVPN asks you if you want to use an IP or a DNS address, select DNS and enter the domain here.

## Set up Wireguard for split-tunnel VPN, then begin adding devices

- First, we want to change the default settings for Wireguard that are used to create the device configs.
- I set this up as 'split-tunnel' meaning that I only send DNS and not *all* my data through my Pi. I also add my home network so when I'm on the VPN, I can access the services in my home server.
- edit the PiVPN configuration with: `sudo nano /etc/pivpn/wireguard/setupVars.conf`. Change the `AllowedIPs` line to = the IP/32 above under DNS (which is your Pi-Hole DNS address), and optionally, add your home gateway (e.g., 192.168.68.0/24) 
- Then use `pivpn add` to create a new device config (e.g., `iphone`) and `pivpn qr` to display the qr cod

## Setup devices with Wireguard profiles

- Use the Wireguard QR codes that were generated to setup your mobile devices. I set the profiles to *on-demand* except when connected to my home wifi SSID. That means that as soon as I leave home, Wireguard will connect remotely to continue ad-blocking.
- To download the Wireguard config files to your computer, use the following secure-copy commands. Make sure you are *not* connected by SSH when running this on your home computer: `scp -r pi@raspberrypi.local:/opt/wireguard/peer*/ [destination on home computer]`
- For example, I saved them to a folder called pihole_configs in My Documents using: `scp -r 'pi@raspberrypi.local:/opt/wireguard/peer*' ~/Documents/pihole_configs`

# Install DNScrypt

- Refer to this [guide](https://github.com/SwaroopGiri/Pihole-with-Anonymized-ODOH), or proceed making sure to update the links to the most recent release from the main repo [here](https://github.com/DNSCrypt/dnscrypt-proxy/releases).
- Install DNSCrypt-proxy, and add the configuration file:

```bash
cd /opt

sudo wget https://github.com/DNSCrypt/dnscrypt-proxy/releases/download/2.1.5/dnscrypt-proxy-linux_arm-2.1.5.tar.gz

sudo tar -xf dnscrypt-proxy-linux_arm-2.1.5.tar.gz
sudo mv linux-arm dnscrypt-proxy && cd dnscrypt-proxy
sudo cp example-dnscrypt-proxy.toml dnscrypt-proxy.toml
sudo nano dnscrypt-proxy.toml
```

- This will open a text-editor with the example configuration file, which you can customize for your setup
- Here is mine already set to use ODOH: [dnscrypt-proxy.toml](dnscrypt-proxy.toml)
- Save any changes to the file: `CTRL + X then Y and Enter`
- Then start the service:

```bash
sudo ./dnscrypt-proxy -service install
sudo ./dnscrypt-proxy -service start
sudo systemctl status dnscrypt-proxy
```

- Test the service with `./dnscrypt-proxy -resolve www.google.com`, you should get something like:

```bash
Resolving [www.google.com] using 127.0.0.1 port 5350

Resolver      : 172.69.207.24

Canonical name: www.google.com.

IPv4 addresses: 142.251.32.68
IPv6 addresses: 2607:f8b0:400b:807::2004

Name servers  : no name servers found
DNSSEC signed : no
Mail servers  : no mail servers found

HTTPS alias   : -
HTTPS info    : [alpn]=[h2,h3]

Host info     : -
```

## Set-up Pi-Hole for DNScrypt-proxy

- Login to Pi-hole web interface, Goto settings / DNS / Select Custom 1 (IPv4) and enter: `127.0.0.1#5350`. Select Custom 3 (IPv6) and enter `::1#5350`.
- Uncheck everything else in Upstream DNS Servers section.
- Reboot the Pi via `sudo reboot`

# Hardcode DNS
- If the Pi is using DHCP and receiving the Pihole's IP (itself) for its DNS, it can in some circumstances (e.g., Pihole down) create a non-working loop.

## Set a 'hard-coded' DNS specifically for the Raspberry Pi
- check the current DNS using `cat /etc/resolv.conf` - you'll likely see Pi-Hole's IP as your primary IP.
- use `nmcli device status` to identify the name(s) of your connections. Mine is called `Wired`
- Since, I'm using `Wired`, the following will tell the wired connection to ignore DNS from the DHCP (my router), and instead use cloudflare at 1.1.1.1 (you can specify whatever you prefer here):
```bash
sudo nmcli con mod "Wired" ipv4.dns "1.1.1.1" ipv4.ignore-auto-dns yes
sudo systemctl restart NetworkManager
nmcli dev show eth0
```

# Router setup

- Go to your router settings, note these steps depend entirely on your own router model 
- Forward port 51820 to your Pi's local IP address to enable Wireguard to work properly
- Set your primary DNS in your DHCP server settings to your Pi's local IP. **Leave the secondary DNS blank.**

# Useful Pihole Addons

## Easily add adlists and whitelists

I like the [pihole list tool](https://github.com/jessedp/pihole5-list-tool) for adding adlists and whitelists, you can install it by SSH back to your Pi, then running `sudo pip3 install pihole5-list-tool --upgrade` . Select the Docker version once it launches, then choose the blocklists and whitelists options from the list that appeal to you.

## Set up apps that use PiHole API token

You can use PiHole apps (e.g., [Pi-Hole remote](https://apps.apple.com/nl/app/pi-hole-remote/id1515445551?l=en)) by selecting https://, using your [Raspbery Pi IP] and port: 443 along with your PiHole's API token. I set up two PiHoles in the app *PiHole - local* and *PiHole - remote*. To set up remote, I used https://, 172.18.0.5, and port:443

## Use the list tool to check which lists you're actually using

The [Pihole Adlist Tool](https://github.com/yubiuser/pihole_adlist_tool) is a script that will analyze 30 days worth of adblocking to see which lists you're actually using. After running the script, it can automatically disable any lists that aren't being used. To run it, ssh into your PiHole then run:

```bash
 wget https://github.com/yubiuser/pihole_adlist_tool/archive/refs/tags/2.6.3.zip
 unzip 2.6.3.zip
 rm -r 2.6.3.zip
 cd pihole_adlist_tool-2.6.3
 sudo ./pihole_adlist_tool
```

Then follow the prompts, noting that it may take some time to run. **Note** that you might want to check for the latest release of the tool, as v2.6.3 might be out of date when you read this.

If PiHole is all you wanted, then you can stop here. If you're interested in also adding HomeBridge read on!

## Gravity Sync

Use [Gravity Sync](https://github.com/vmstan/gravity-sync) to sync lists with a secondary Pi-Hole

First, you'll need to set a password for user Pi if you don't already have one using:

```bash
sudo passwd pi
```

Then run the installation script, you'll be prompted for your secondary Pi's IP address, and the username (e.g., root) and password of the system on which it is installed.

```bash
curl -sSL https://raw.githubusercontent.com/vmstan/gs-install/main/gs-install.sh | bash
```

I use `gravity-sync push` to push my lists from Cloudblock over to the new, secondary Pi.

# Next

[Install Homebridge](Homebridge.md)

# Support this project

If you found this guide helpful, please consider buying me a coffee by clicking the link below. I'll do my best to keep this guide up to date and as user-friendly as possible. Thank you and take good care!

[![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=R4QX73RWYB3ZA)

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2

PiHole-Wireguard-and-Homebridge-on-Raspberry-Pi-Zero-2 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README