DUCK

KO | EN

gitlite — search

#javascript #ai #typescript #golang #machine-learning #linux #macos #java #awesome #cli #awesome-list #pytorch #openai #open-source

(★ 8)

Aircraft proximity alerts for DUMP1090

DUCK Latest Version Download

Download Latest Version (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

## DUCK
### Aircraft proximity alerts for DUMP1090

This alert script reads the JSON data created by DUMP1090 and alerts the user for low altitude aircraft in the area. Some aircraft do not transmit location in their ADS-B data and sometimes this data is missing due to poor signal quality. When the alert script detects an aircraft with a low altitude and its location is unknown, the warning will be triggered as a safety precaution. DUCK and DUMP1090 can run on different computers but is intended to function without any network or internet connection. All you need is the software, a RTL-SDR and a vertically polarized antenna tuned to 1090 MHz. See DUMP1090 documentation for outputting JSON data.

The purpose of DUCK is to be an early warning system for drone pilots. Where I live, close to the coast in the middle of Sweden, low flying helicopters can pop up out of nowhere. Ambulance-, Coast Guard and Sea Rescue choppers are quite busy some days and they can come in very low. Of course you should keep your drone way away from their airspace but a warning tool for incoming aircraft can still be good practice.

Be advised that not all aircraft carries an ADS-B transmitter and will therefore not be detected. Do not blindly trust this script, it's just one tool in the toolbox.

DUCK should run on Windows, MacOS and Linux with python3.

### Settings
In the beginning of the file duck.py you can find a section commented "User settings". Update these parameters for your location and alert thresholds.

* alert_alt - the altitude under which to alert. The unit depends on how you set the 'metric' parameter.
* play_sound - set to False for silent mode
* metric - set to True to convert altitude and distance to meters and kilometers
* refresh_timer - seconds the script will wait before refresh
* timeout - seconds the script will alert after no more data is received when alerting
* json_source - url to JSON file from DUMP1090. data.json or aircraft.json, depending on version
* my_lat - your latitude position
* my_long - your longitude position
* alert_distance - radius of the alert in miles or kilometers
* log - set True for writing alerting aircraft to a txt file. A new file is created for each session.

### KNOWN LIMITATIONS

Reported altitude from the aircraft is uncorrected for local changes in pressure and temperature. This may cause an incorrect or even negative altitude being reported, a limitation of the ADS-B system itself. Negative altitudes will trigger the warning.

Airport ground vehicles transmitting ADS-B data may trigger the altitude warning, this is not yet tested. Add them to ignored_aircraft to suspend warning.

Aircraft reporting a non-numerical altitude may cause the script to crash. Not yet tested.

Warning sounds play well on Windows but is not yet fully implemented on MacOS and Linux, on where they now just play the default terminal beep.

DUCK

DUCK Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

DUCK

DUCK Latest Version Download

Today's picks

Was this content helpful?

Recent Feedback

Download README