bcclient

KO | EN

gitlite — search

#hacktoberfest #typescript #machine-learning #rust #macos #nodejs #java #awesome #cli #kubernetes #awesome-list #pytorch #openai #open-source

(★ 16)

Bitcoin Network Probing Tool

bcclient 최신버젼 다운로드

최종 버전 다운로드 (.zip)

// repository documentation

Was this content helpful?

★ 0 (0 ratings)

Bitcoin Network Probing Tool
============================

Sometimes you want to query information a Bitcoin node, e.g.  the type
of client it uses or its current timestamp.

./bcclient 86.151.93.192
	[INFO]: Sending version message
	[INFO]: Version received. peer=86.151.93.192:8333.2, useragent=/Satoshi:0.13.1/, timestamp=1479927567, localtime=1479927580

Sometimes you want to make several parallel connections to the same node

./bcclient -n2 86.151.93.192

Sometime you want to receive blocks/transactions from a peer and print them in real time

./bcclient -l inv -l tx 86.151.93.192

Or you want to query a node about peers it is aware of by sending a 'getaddr' message:

./bcclient -s getaddr -l addr -l idle 86.151.93.192

Or you want to send a bogus block:

./bcclient -s block -l idle 86.151.93.192 # '-l idle' keeps the connection open

This kind of information is hard to get/send using the core Bitcoin client
which motivates the development of this Bitcoin network-probing client.
This software was used when testing the attack described the following
papers:

[1] Alex Biryukov, Ivan Pustogarov. Bitcoin over Tor isn’t a good Idea.
IEEE Symposium on Security and Privacy (Oakland) 2015.

[2] Alex Biryukov, Dmitry Khovratovich, Ivan Pustogarov. Deanonymisation
of Clients in Bitcoin P2P Network. ACM Conference on Computer and
Communications Security 2014 (ACM CCS): 15-29

## Compile Instructions
This software relies on a specific commit of libbitcoin (and probably
will not work with other commits). This specific commit is included and
you have to compile it first.

$ sudo apt-get install build-essential autoconf automake libtool libboost-all-dev pkg-config libcurl4-openssl-dev libleveldb-dev shtool
	$ cd libbitcoin
	$ ln -s $(which shtool)
	$ autoreconf -i
	$ ./configure --enable-leveldb
	$ make
	$ cd ../
	$ make

I tested the tool in Ubuntu 12.04, Ubuntu14.04, and Debian 8.4.
If it does not compile, you might want to try older version of libboost.

## Using with testnet
By default the tool works only with mainnet.
You will need to recompile it to work testnet.

$ make clean
	$ cd libbitcoin
	$ make clean
	$ ./configure --enable-leveldb --enable-testnet
	$ make
	$ cd ../
	$ make

Remember to use '-p 18333' (default is 8333)

## Using with Tor
In order to use "./bcclient" program through tor and use a specific Exit
node, you can use the following configuration;

Launch Tor on on a separate local machine with the following lines in torrc:

ExitNodes <exit-node-name> 
	StrictExitNodes 1
	SocksPort <your-torproxy:9100>

Install badvpn

Create new tuntap interface:

$sudo ip tuntap add dev tun0 mode tun
	$sudo ip link set tun0 up
	$sudo ip addr add 10.0.0.1/24 dev tun0
	$badvpn-tun2socks --tundev tun0 --netif-ipaddr 10.0.0.2 --netif-netmask 255.255.255.0 --socks-server-addr <your-torproxy>:9100
	$sudo route del default
	$sudo route add default gw 10.0.0.2

In order to put everything back:

$sudo route del default
	$sudo route add default gw 10.91.0.1
	$sudo ip tuntap del dev tun0 mode tun

## Output format 
When ./bcclient receives a transaction it prints by default it in a
succinct way. In order to include fields description, use '-v' flag.

BC:14iyH71Y9kEDUXdQCytizPNTvFNAUUn3do

bcclient

bcclient 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

bcclient

bcclient 최신버젼 다운로드

오늘의 추천 프로젝트

Was this content helpful?

Recent Feedback

Download README